Wiedamark LT-SYSTEM-3600RC Manuel utilisateur
LT-SYSTEM-3600RC MANUAL Page 1 of 8
LT-SYSTEM-3600RC
LED RGB CONTROLLER
(Version V2.00)
Manual
(Please kindly read this manual carefully before use)
LT-SYSTEM-3600RC MANUAL Page 2 of 8
Foreword
Thanks for choosing our LT-SYSTEM-3600RC Full Color Multifunction
Controller. Before installation and usage, we strongly recommend you to
read through this manual carefully.
After-sales service
From the day you purchase our products within a year, if being used properly
in accordance with the instruction, and quality problems occur, we provide free
repair or replacement services except the following cases:
1. Any defects caused by wrong operations..
2. Any damages caused by unauthorized removal, maintenance, modifying
circuit, incorrect connections and replacing chips.
3. Any damages due to transportation, vibration etc after the purchase.
4. Any damages caused by earthquake, fire, lightning strike, pollution and
abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high
temperature and humidity environment or near harmful chemicals.
6. Product has been updated.
Safety Warnings
1. Please don’t install this controller in lightening, intense magnetic and
high-voltage fields.
2. To reduce the risk of component damage and fire caused by short
circuit, make sure correct connection
3. Always be sure to mount this unit in an area that will allow proper
ventilation to ensure a fitting temperature.
4. Check if the voltage and power adapter suit the controller & if anode or
cathode definition is the same as the controller’s.
5. Don’t connect cables with power on, make sure a correct connection
and no short circuit checked with instrument before power on.
6. Please don’t open controller cover and operate if problems occur.
For update information, kindly please consult with your supplier.
LT-SYSTEM-3600RC MANUAL Page 3 of 8
Product brief
LT-SYSTEM-3600RC Full-color Multifunction Controller is dedicated to
control color changes of LED lights with 4-pin 3-loop cables (common
anode). It can be controlled through manual buttons and its match
remote controller. Also this unit can run standalone or networking with
multi controller (working with 3060 power expansion, output voltage can
be unlimitedly expanded)
Ⅰ. Performance Parameter:
Model：LT-SYSTEM-3600RC
Input Power： DC5V-DC24V Speed： 16 level
Output Current：6A/CH×3Brightness
Adjust： 0-32 level
Consumption：＜1W Protection： auto Overload Protection
Output Power： 1～90W(5V) Working Tem： -35℃－55℃
1～220W(12V) 1～450W(24V) Dimension： L211×W40×H30(mm)
Mode： 10 Package： L220×W43×H33(mm)
Gray Scale： 256 level per RGB Weight：210g
Remote Control：
50 m
Ⅱ. Functions:
1. Controlled both by manual buttons and its fitting remote controller,
control distance can reach as far as 50m. If in the spacious place or
add signal antenna, the control distance can be up to 1000m.
2. Three RGB channels, Output current: 6A/ch x3
3. 10 skip, gradual changing modes, Gray grade: 256 levels per RGB
4. 1-16 speed level for each mode, can be chosen separately
5. 0-32 brightness level for each mode, can be choose separately
6. The current color depth of LED light can be stored with the function
LT-SYSTEM-3600RC MANUAL Page 4 of 8
of Pause
7. Used independently or connected to LT-SYSTEM-3060 power
extension module, unlimited quantities, to have an unlimited power
expansion output
8. Auto load protection，auto default recovery.
Ⅲ. Product Structure:
Ⅳ.Changing Modes List
No. Modes Description
1 AUTO PROGRAM AUTO CYCLE
2 WHITE CHANGE SCREEN FLASH
3 RGB CHANGE RGB SKIPPING
4 COLOR GHANGE 7 COLOR SKIPPING
5 RGB SMOOTH RGB GRADUAL
6 COLOR SMOOTH 7 COLOR GRADUAL
7 RG SMOOTH RED GREEN GRADUAL
8 RB SMOOTH RED BLUE GRADUAL
9 GB SMOOTH GREEN BLUE
10 BLACK ALL BLACK
LT-SYSTEM-3600RC MANUAL Page 5 of 8
Ⅴ. How to use it
RC
button Controller
button Instruction
1 MODE Press to change modes
2 PAUSE Press to stay at the current color, press
again any button, color change
continues.
3 SPEED+ To increase speed by every press.
4 SPEED- To decrease speed by every press.
5 BRT+ To increase LED brightness by every
press.
6 BRT- To decrease LED brightness by every
press.
/ DIM To switch LED running status indicator
LT-SYSTEM-3600RC MANUAL Page 6 of 8
.ⅥException Handles:
Fault Case Reasons Solutions
No light
1、No power from plug
2、At black mode
3、The fuse broken
4、Incorrect connection
1、Change the socket
2、Change the running
mote
3、Replace the fuse
4、Check the
connection
Incorrect
Color, not
synchronous
5、Incorrect RGB
connection
6、Wrong sync-cable
connection
5、Check RGB
connection
6、Check sync-cable
No running
light 7、Running light off. 7、Press DIM to turn on.
. Conjunction DiagramⅥ(LED module as an example)
Ⅶ. Connecting to power extension (LED module as an example)
Usually 3 connecting methods, these 3 methods can be mixed in
applications.
LT-SYSTEM-3600RC MANUAL Page 7 of 8
Method 1:
Method 2:
LT-SYSTEM-3600RC MANUAL Page 8 of 8
Method 3:
Table des matières
Autres manuels Wiedamark Contrôleurs
