WiebeTech FONBP Manuel utilisateur

F o r e n s i c N o t e B o o k D r i v e D o c k + U s e r M a n u a l - 1 -

Forensic Notebook DriveDock+™

USER’S MANUAL

Revised May 2, 2007

Features

•Dual, daisy-chainable FireWire 400 ports

•Write-blocking preserves the integrity of

evidentiary drives

•Bus-powered through FireWire, plus two

options for external power

•LEDs show when unit is receiving power as

well as power output status

•Host-detection LED indicates valid

connection to a FireWire host

Forensic Device User Advisory

We recommend that you perform a final check on this product.

Prior to first use, please verify that the write-blocking function of this product is working properly. This is

easily done: attach a known good formatted drive, and verify that the drive mounts properly on your

computer. Use a drive that has data on it that you are willing to overwrite. Transfer files to the drive. The

files will appear to transfer to the drive. Thereafter, unmount the drive and remount the drive. The files

that you wrote to the drive should not appear after the drive is remounted. If they do appear, there is a

problem with your Forensic Device, and you should contact our support department for further

instructions.

Installation Instructions

1. Check the accessories with your Forensic Notebook DriveDock+™. Please contact WiebeTech if any items

are missing or damaged. The box should contain:

Forensic Notebook DriveDock+ 1

FireWire 400 cable 1

Hard drive screws 4

Rubber bumpers 6

Manual and Warranty information (on CD)

WiebeTech LLC

F o r e n s i c N o t e B o o k D r i v e D o c k + U s e r M a n u a l - 2 -

2. Take a moment to familiarize yourself with the parts of your new Forensic Notebook DriveDock+™. This

will aid you in the remaining steps.

3. Connect the hard drive to the dock. If you’ve removed the drive from a laptop computer, it may be inside a

mounting sleeve. You’ll need to remove this so that the drive will fit with the DriveDock. Place the drive onto the

green plate with the label side up. Carefully slide the drive forward until the pins are fully inserted into the IDE

connector. If you wish, you may secure the drive in place with the included screws.

4. Connect the FireWire cable from your computer into the appropriate port on the DriveDock.

5. Connect power to the Dock. There are three options:

a. The Notebook DriveDock can be bus powered through FireWire, and therefore does not require an

additional power source when used with powered FireWire hosts. When bus power is present, the LED

labeled “BP” will illuminate.

b. To connect to FireWire hosts lacking sufficient bus power, plug in the optional AC adapter. When the AC

adapter is connected, the LED labeled “+12” will illuminate.

c. Alternatively, you may supply power through a standard 4-pin Molex connector. When power is connected

in this way, the LED labeled “4 PIN” will illuminate.

A+12V power input from optional AC adapter

B1394a FireWire 400 Ports

CDC input for 4-pin power connector

DPower Switch ( | = On, 0 = Off)

FireWire bus power is present

b+12V DC power input is present

cUnit is write-blocked

dUnit is connected to FireWire host

ehard drive access

f+12V Power output to drive

g +5V Power output to drive

h4-pin power input is present

Forensic

Notebook

DriveDock+™

+12

4 PIN

+12

LEDs

WiebeTech LLC

F o r e n s i c N o t e B o o k D r i v e D o c k + U s e r M a n u a l - 3 -

Note: The DriveDock+ may utilize any 12V

regulated switching power supply capable of

supplying 2A or greater. Do not use an

unregulated adapter, as damage may occur to

the Dock or the attached drive.

Your DriveDock is now ready to use! Turn on the unit by moving the power switch toward the side labeled “|”. When

power is on, the output LEDs “+12” and “+5” will illuminate to show that power is going to the hard drive.

The red LED access indicator will light briefly after the unit is powered up, indicating that the FireWire bridge has

successfully established communication with the drive. Thereafter, it will light whenever the drive is accessed. If the

access LED does not blink shortly after drive spin up, it may indicate a problem with the drive or the dock. If the

access LED blinks at a steady rate, this also may be indicative of a problem or an incorrectly jumpered drive. Contact

technical support for further assistance if necessary. If your hard drive is already formatted, you can begin using it

right away. New hard drives will need to be formatted before they can be used.

Usage with Macintosh Computers

Compatibility

The Forensic Notebook DriveDock+™is fully plug-and-play under Mac OS 9.2 and OS X. No drivers are needed.

The USB 2.0 port is USB 1.1 compatible.

Mounting Volumes

When the drive is connected and the unit is turned on, the drive’s volume(s) will mount to the desktop. You can

access the drive and begin retrieving data right away.

Usage with Windows Operating System

Compatibility

The Forensic Notebook DriveDock+™is fully plug-and-play with Windows XP. No drivers are needed. The USB 2.0

port is USB 1.1 compatible.

Mounting Volumes

When the drive is connected and the unit is turned on, the drive’s volume(s) will mount to My Computer. You can

access the drive and begin retrieving data right away.

WiebeTech LLC

F o r e n s i c N o t e B o o k D r i v e D o c k + U s e r M a n u a l - 4 -

Technical Specifications

Product Code

FONBP

Interface

FireWire 400 using OXFW911

USB not supported

External

Power Supply

100-240VAC +12V / 3A (not included—WiebeTech Part # PWR-3)

Power Input

(+12V): +12V DC Jack

(+12V / +5V): Standard disk drive 4-pin Molex power jack

Power Output

+5V at 0.75A

Power Switch

On / Off

Host Indicators

FireWire host attached LED

Access Indicator

Provides visual indication of hard drive activity

Write Block indicator

Indicates write-blocked operation

Operating Temperature

50 – 85°Fahrenheit (10 – 30°Celsius)

Operating Humid

ity

5% to 95%, noncondensing

Bus Powering

Converts FireWire bus power to +5V

Compatibility

2.5” ATAPI drives

Operating System

Windows XP

Mac OS 9.2, OS X

Linux distributions supporting FireWire

Shipping Weight

2 pounds

Dimensions

3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)

Dimensions are exclusive of attached plates, drives, and cables.

Warranty

1-year limited warranty. See warranty statement for details and limitations. 90 days

of free phone support. For support by email, contact [email protected].

Forensic Notebook DriveDock+™is a trademark of WiebeTech LLC. Other marks are the property of their respective

owners.

FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.”

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1) Ensure that the bottom plate and case of your attached drive is grounded, either to the DriveDock case or to an Earth ground.

2) Use a FireWire cable with RFI reducing ferrites on each end.

3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

If you have any questions or problems, please contact [email protected] for technical support. If you are

interested in purchasing more WiebeTech products, check our website or contact sales@wiebetech.com. We

appreciate being able to serve you!

Forensic Notebook

DriveDock+

Tested to comply

with FCC standards

FOR HOME OR OFFICE USE

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WiebeTech Adaptateur

WiebeTech

WiebeTech PCI-11 Manuel utilisateur

WiebeTech

WiebeTech RP-PCIE-SCSI Manuel utilisateur

WiebeTech

WiebeTech FONB Manuel utilisateur

WiebeTech

WiebeTech NBDDP Manuel utilisateur

WiebeTech

WiebeTech NBDD Manuel utilisateur

WiebeTech

WiebeTech SDP Manuel utilisateur

WiebeTech

WiebeTech SDK Manuel utilisateur

WiebeTech

WiebeTech FSDK Manuel utilisateur

WiebeTech

WiebeTech RP-PCIE-FC Manuel utilisateur

WiebeTech

WiebeTech TCS1-1 Manuel utilisateur

WiebeTech

WiebeTech ADAv4-18-TOSH Manuel utilisateur

WiebeTech

WiebeTech UltraDock v4 Manuel utilisateur

WiebeTech

WiebeTech FSD Manuel utilisateur

WiebeTech

WiebeTech MBD Manuel utilisateur

WiebeTech

WiebeTech TC-PCIE-2XR Manuel utilisateur

WiebeTech

WiebeTech ADAv4-18-TOSH Manuel utilisateur

WiebeTech

WiebeTech ADA-10 Manuel utilisateur

WiebeTech

WiebeTech FWDDP Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur