Whyte 20C Team Manuel
20C, 20C S & 20C Team
29C, 29C S & 29C Team
529, 629 & 729
801, 802, 805, 810 & 810 Ladies
901 & 905
929
Supplementary Service Manual
dition 1: February 2012
2010 Edition 1 Page 3
Table of Contents
1.0 Introduction
2.0 Geometry:
2.1: Whyte 20C, 20C S & 20C Team
2.2: Whyte 2 C, 2 C S & 2 C Team
2.3: Whyte 52 , 62 & 72
2.4: Whyte 801, 802, 805 & 810
2.5: Whyte 810 Ladies
2.6: Whyte 01 & 05
2.7: Whyte 2
3.0 Preparations for riding:
3.1 Making Adjustments
3.2 Getta-Grip Seat Clamp
3.3 Set up of Fork
3.4 Suspension Tuning Log
3.5 Whyte Adjustable Dropout System
3.6 Adjusting the Dropout System
4.0 Safety.
5.0 Lubrication:
5.1 Getta-Grip Seat Clamp
5.1.1: Bolt Up
5.1.2: QR Style
5.2 Whyte Adjustable Dropout System
5.3 General Whyte Hardtail Lubrication
6.0 Torque Settings:
Whyte Adjustable Dropout System & Whyte Rear Derailleur Hanger
7.0 Notes.
2010 Edition 1 Page 4
WHYT Service Manual
1.0: INTRODUCTION
Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the bene-
fits its advanced design and engineering will bring to your riding experience.
This manual will guide you through the set-up, safety and maintenance procedures that
are specific to your Whyte bike. For other more general information, we strongly advise
that you also read thoroughly the General Instruction Manual that is also supplied with
your new bike.
Also, please note that the specification of all the components that are fitted to your bike as
standard may be obtained from the Whyte Bikes Brochure or alternatively from the Whyte
Bikes website www.whytebikes.co.uk
Please remember, if you are in any doubt about your ability to safely service or repair your
Whyte bike, do not ride it and instead arrange for a professional bicycle mechanic at your
local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and manuals for
the branded parts that are fitted to your Whyte bike. Please take time to study all the rele-
vant instruction manuals to ensure you have a continually safe and well set-up bike before
every ride, and to help you build up a relationship of knowledge between you and your
Whyte Dealer.
Happy and safe riding,
Whyte design team. February 2012.
2010 Edition 1 Page 5
WHYT Service Manual
2.0: G OM TRY
Frame Size
Small Medium Large
Head Angle 68.5° 68.5° 68.5°
Seat Angle 74.0° 73.5° 73.5°
Top Tube 560.0mm 584.6mm 603.6mm
BB Height* 300.0mm 300.0mm 300.0mm
Stand Over 750mm 755mm 775mm
Wheel Base 1073.6mm 10 3.6mm 1113.6mm
Chain Stay 425mm 425mm 425mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
2.1: WHYT 20C, 20C S & 20C Team
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø660mm tyres fitted (1. ” / 47-55 )
Fig.1:
Geometry
2010 Edition 1 Page 6
WHYT Service Manual
Frame Size
Medium Large xtra - Large
Head Angle 6 .3° 6 .3° 6 .3°
Seat Angle 73.0° 73.0° 73.0°
Top Tube 612.2mm 627.0mm 640.8mm
BB Height* 305mm 305mm 305mm
Stand Over 860mm 880mm 715mm
Wheel Base 1117.3mm 1127. mm 1144. mm
Chain Stay 437.5mm 437.5mm 437.5mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
2.2.2: WHYT 29C, 29C S & 29C Team
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622)
Frame Size
Medium Large xtra - Large
Head Angle 68.5° 68.5° 68.5°
Seat Angle 73.0° 73.0° 73.0°
Top Tube 600.2mm 614.8mm 62 .4mm
BB Height* 305mm 305mm 305mm
Stand Over 80 mm 827mm 852mm
Wheel Base 1113.4mm 1128.4mm 1143.4mm
Chain Stay 440.0mm 440.0mm 440.0mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
2.2.3: WHYT 529, 629 & 729
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622)
2010 Edition 1 Page 7
Frame Size
Small Medium Large
Head Angle 68.5° 68.5° 68.5°
Seat Angle 73.5° 73.5° 73.0°
Top Tube 583.3mm 5 8.0m 617.3mm
BB Height* 313.5mm 313.5mm 313.5mm
Stand Over 773mm 7 7mm 824mm
Wheel Base 10 1.4mm 1106. mm 1122.7mm
Chain Stay 425mm 425mm 425mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
xtra
Large
68.5°
73.0°
628.2mm
313.5mm
844mm
1133.4mm
425mm
30. mm
xtra
Small
68.5°
74.0°
560.7mm
313.5mm
768mm
1073.4mm
425mm
30. mm
2.2.4: WHYT 801, 802, 805 & 810
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25” / 54-55 )
WHYT Service Manual
Frame Size X
Small Medium
Head Angle
A
68.5° 68.5°
Seat Angle
B
73.5° 73.5°
Top Tube
C
574.8mm 58 .4m
BB Height*
D
313.5mm 313.5mm
Stand Over
E
770mm 785mm
Wheel Base
F
1083.4mm 10 8.4mm
Chain Stay
G
425mm 425mm
Seat Post
H
30. mm 30. mm
2.2.5: WHYT 810 Ladies
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25” / 54-55 )
2010 Edition 1 Page 8
WHYT Service Manual
Frame Size
Small Medium Large
Head Angle 67.5° 67.5° 67.5°
Seat Angle 72.5° 72.5° 72.5°
Top Tube 565.1mm 584.5mm 60 .6mm
BB Height* 322.7mm 322.7mm 322.7mm
Stand Over 774mm 800mm 826mm
Wheel Base 1081.6mm 1101. mm 1128.8mm
Chain Stay 425mm 425mm 425mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
xtra Large
67.5°
72.5°
628.8mm
322.7mm
853mm
1153.8mm
425mm
30. mm
2.2.6: WHYT 901 & 905
Notes:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø677mm tyres fitted (2.25” / 54-55 )
Whyte 05 has an adjustable rear drop-out, see section 3.4. When fully extended rearwards, this adds 10mm to Chain
-stay and Wheelbase lengths. When fully retracted forwards, the reduces Chain-stay and Wheelbase lengths by 10mm.
Frame Size
Small Medium Large
Head Angle 68.0° 68.0° 68.0°
Seat Angle 73.5° 73.5° 73.5°
Top Tube 60 . mm 624. mm 637. mm
BB Height* 305mm 305mm 305mm
Stand Over 7 mm 814mm 841mm
Wheel Base 112 .4mm 1145.6mm 115 .4mm
Chain Stay 435.0mm 435.0mm 435.0mm
Seat Post 30. mm 30. mm 30. mm
X
A
B
C
D
E
F
G
H
2.2.7: WHYT 929
Note:
Geometry shown here is ’Showroom’ i.e. without rider aboard the bicycle. ’With Sag’ geometry is with rider after correct
sag is set at the front. Please refer to suspension set up for information on how to achieve the correct sag of the fork.
* BB height with Ø738mm tyres fitted (2.1” / 52-622).
Whyte 2 has an adjustable rear drop-out, see section 3.4. When fully extended rearwards, this adds 10mm to Chain
-stay and Wheelbase lengths. When fully retracted forwards, the reduces Chain-stay and Wheelbase lengths by 10mm.
2010 Edition 1 Page
WHYT Service Manual
3.0: PR PARATIONS FOR RIDING
3.1: MAKING ADJUSTM NTS
Please refer to the specific component manufac-
turers manual or published technical information
about adjusting the components on your Whyte
bike. Instructions may be downloaded from the
relevant manufacturer’s internet site, as shown in
the table to the right.
CAUTION! If you are uncertain in any
way, about making adjustments to any
components on you Whyte bike, then DO
NOT RID YOUR BIK . Contact your
Whyte dealer who will be able to advise
you on how to go about setting up you
Whyte for riding, and or making adjust-
ments to the components fitted to your
Whyte.
3.2: WHYT G TTA-GRIP S AT CLAMP
The Getta Grip seat clamp design is a patented design to allow adjustment of the saddle
height by either the use of a QR Lever, or bolt-up method. This manual covers both styles
of clamps.
Alex Rims www.alexrims.com
Continental www.conti-online.com
CST www.csttires.com
DT www.dtswiss.com
Easton www.eastonbike.com
Fi:zik www.fizik.it
FSA www.fullspeedahead.com
Fulcrum www.fulcrumwheels.com
Formula www.formulahubs.com
Fox www.foxracingshox.com
Hayes www.hayesdiscbrake.com
Hope www.hopetech.com
Mavic www.mavic.com
Maxxis www.maxxis.com
Shimano www.shimano.com
SRAM www.sram.com
Sun Ringle www.sun-ringle.com
Tektro www.tektro.com
Thomson www.lhthomson.com
VP www.vpcomponents.com
WTB www.wtb.com
TH www.thindustries.com.tw
2010 Edition 1 Page 10
WHYT Service Manual
Bolt-up Type: Fig.2
Tools Required: 5mm Allen Key
( ote, refer to the seat-pin manufacturers instructions in conjunction with these notes).
To adjust the seat height, using the 5mm Allen key, undo the M6 bolt (5) just enough to allow
the seat-pin to slide freely up and down. Set the height to the desired level, and re-tighten the
M6 bolt (5) with the 5mm Allen Key just enough so as to prevent the seat-pin from slipping down
and twisting.
To Adjust the seat height with the QR Lever assembly fitted, simply undo the QR Lever (3) from
the Closed position to the Open position. Next adjust the height of the Seat Pin to the desired
level, and close the QR lever (3) from the Open position to the Closed position. The QR closing
force can be adjusted by turning the QR Adjuster Bobbin (7) clockwise or anti-clockwise before
closing the QR Lever (3).
Item Description
1 QR Lever Cam Grub Screw
2 QR Lever Cam
3 Whyte QR Lever
4 Plastic Shim
5 Whyte Main Frame
6 Whyte Seat Clamp Band
7 QR Adjuster Bobbin
8 QR Shaft
T-Pad
Fig.3: Getta-Grip Seat Clamp: QR Lever
Item: Description
1 Whyte Seat Clamp Band
2 T-Pad
3 Whyte Main Frame
4 Barrel Nut
5 M6 x 30mm Fastener
6 M6 Washer
Fig.2: Getta-Grip Seat Clamp: Bolt-up
Ce manuel convient aux modèles suivants
16
Table des matières
Autres manuels Whyte Vélo
Whyte
Whyte KYNAMIC Manuel utilisateur
Whyte
Whyte e-MTB HardTail Series Manuel utilisateur
Whyte
Whyte 801 Manuel utilisateur
Whyte
Whyte C7 series Manuel
Whyte
Whyte G-150 Works SCR Manuel
Whyte
Whyte 29 CS Manuel
Whyte
Whyte MTB Hardtail Series Manuel
Whyte
Whyte 905 Manuel utilisateur
Whyte
Whyte 146 Manuel
Whyte
Whyte 27C Works Manuel
