Rear View
1) Setting knob – Used to set the time on the right side of the timer
2) Battery cover – Remove to install on AA battery (not included)
3) Setting knob – Used to set the time on the left side of the timer
Instructions for Use
1. Install the AA battery (not included) in the back of the timer by removing the battery cover.
Be sure to match the (+) and (-) ends of the battery to the image on the inside of the battery
compartment.
2. Ensure that the two buttons on the top of the timer are in the middle position (neither fully up
nor down). This will ensure that the timer is not turned on. If desired you can insert one
spacer clip underneath each button on the top of the timer to ensure the timer is not on.
3. Use the setting knobs on the back of the timer to set both the minute and hour hands to 12
position. Don’t worry about the second hand (red hand).
4. After determining the length of time each player will receive, set each side to the amount of
time desired using the setting knobs on the back of the timer. For example, if you want each
side to have 30 minutes of game time move the minute hand counter clockwise on each side
of the timer to the 6 position.
5. After the time has been set for each player the player who will play second will depress the
button on the top of his/her side of the timer (be sure to remove the spacer clips if you have
not already done so) and the timer on the opposite side will begin to count down.
6. When the first player has completed their turn he/she presses the button on the top of their
side of the timer which will activate the other side of the timer.
