Whistler WIC-5000 Manuel utilisateur

USER GUIDE

Wireless Inspection Camera

WIC-5000

Downloaded from ManualsNet.com search engine

TABLE OF CONTENTS

Welcome..............................................................................1

Introduction.........................................................................2

Packing List.........................................................................2

FeatureDescription............................................................3

Installation...........................................................................4

Operation............................................................................5

Video Out...........................................................................6

FCC Information.................................................................7

Troubleshooting..................................................................8

Speciﬁcations......................................................................9

Warranty.............................................................................10

Welcome

Congratulations on your purchase of our inspection video camera

with color LCD monitor with video out capabilities. Please read

the user guide carefully before using this product. This product

is designed as a remote inspection device, appropriate for use

in surveying pipes or other hard-to-reach places, equipment or

furnishing installation, car repair, etc.

If you have any question concerning the operation of this Whistler

product please call:

Customer Service

1-800-531-0004

Monday - Friday 8:00AM - 5:00PM CT

or visit:

www.whistlergroup.com

Downloaded from ManualsNet.com search engine

Please keep your purchase receipt in a safe place. You may register

your product online at www.whistlergroup.com. For warranty

verification purposes, a copy of your dated store receipt must

accompany any unit sent in for warranty work. If the unit is returned

without a dated store receipt, an out-of-warranty service charge will

be applied.

Note: Your warranty period begins at the time of purchase. The

warranty is validated only by dated store receipt! Please record the

serial numbers (located on the back on the monitor and bottom of

the handheld unit) in the space provided in the warranty section of

this guide.

Enjoy your Whistler Inspection Camera.

Sincerely,

The Whistler Group, Inc.

Packing List

INTRODUCTION

Magnet

Accessory

Clip

Mirror

Accessory

Clip

Hook

Accessory

Clip

9mm Waterproof

Camera Assembly

2.4” LCD

Color Monitor

Downloaded from ManualsNet.com search engine

FEATURE DESCRIPTION

Flexible Tube

9mm Camera

Battery Compartment

Handle

LED Brightness Control

Power ON Indicator

Low Battery Indicator

Power ON/OFF Control

Image Rotate Control

Contrast Control

Getting Familiar with WIC-5000

Video Out Port

Downloaded from ManualsNet.com search engine

INSTALLATION

Installation

Install Batteries

1. Remove the cover.

2. Insert four (4) new AA batteries into the appropriate slots. Proper

battery orientation is indicated on the battery compartment.

3. Replace battery cover.

Install the Camera with Flexible Tube

When connecting the camera tube to the

handheld unit, make sure that the keyed

ends are properly aligned. Once they are

lined up, finger tighten the knob to hold

the connector in place.

Keyed end plugs

into socket

Install the Accessories

The three (3) included accessories (mirror, hook and magnet) are

all attached to the tube in the same way as illustrated below:

Place hook into hole at end of tube. Place rubber ring around

camera head and hook.

Downloaded from ManualsNet.com search engine

Operation

1. Press the power switch to turn the camera on (refer to

Fig-1). The power indicator will illuminate and the LCD will

become viewable.

2. If the image on the LCD is unclear, try adjusting either the

brightness, contrast or mirror controls on the monitor.

LEDs Brightness Control: The 6 levels of LED brightness

can be adjusted by pressing the LEDs Brightness Control

button (refer to Fig-2).

LCD Contrast Control: The 8 levels of LCD contrast may

be adjusted by pressing the LCD Contrast Control button.

3. To rotate the orientation of the image displayed on the

LCD by 90 degrees, press the Mirror button. There are four

(4) possible image orientations that you can toggle through

by pressing this button.

4. When in use, the tube should easily maneuver itself into

position. Do not apply excessive force (refer to Fig-3).

5. The accessories included with the unit can be used to

retrieve small items like dropped rings, screws or grabbing

wires (refer to Fig-4).

OPERATION

Fig 2

LEDs

Provide Illumination

Downloaded from ManualsNet.com search engine

Fig 4

OPERATION

TIP! The flexible tube can be bent to accommodate exploration in a

variety of locations.

IMPORTANT! Do not immerse the monitor in water. Store in a dry

place. Such measures reduce the risk of electric shock and damage.

Only the lens and tube are water resistant when the unit is fully

assembled.

Video Out

Insert the video cable into the Video Out jack on the side of the unit.

Insert the other end of the video cable to a video in on a TV or other

video monitor system. The unit will provide high quality video to an

external monitor.

Downloaded from ManualsNet.com search engine

FCC INFORMATION

CAUTION: Do not expose the monitor or handheld unit

dripping or splashing liquids. Turn off camera and monitor

when not in use. Use only the AC adaptor and cable

supplied with the unit. Properly dispose of the batteries.

Exposure to high temperatures can cause the batteries

to explode. Do not dispose of the batteries in a fire.

When stored, place tape over the terminals to prevent

direct contact with other objects. Some countries have

regulations concerning battery disposal. Please follow all

applicable regulations.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference,

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

IMPORTANT: FCC requirements state that changes or modifications

not expressly approved by Whistler could void the user’s authority to

operate the equipment.

FCC ID: TW5GB8863

Downloaded from ManualsNet.com search engine

TROUBLESHOOTING

Troubleshooting

Why won’t the monitor turn on?

• Make sure that the monitor has been charged at least overnight before

first use. Press the reset button on the unit.

Message on monitor says to “See Guide for Troubleshooting“.

• Make sure that the handheld unit is turned on and that the camera tube is

properly attached to the handheld unit.

The power light comes on but nothing shows on the screen?

• This could be due to weak batteries in the handheld. Replace batteries.

• Is the camera tube fully inserted to the handheld unit? When connecting

the camera tube to the handheld unit, make sure the keyed ends are

properly aligned. Once they are lined up, press in firmly and then finger

tighten the knob to hold the connector in place.

Why is my picture upside down?

• Simply press the image orientation button or move the camera tube to

properly orient the image.

What is the maximum depth the waterproof camera can be submerged?

• Approximately 12 feet - the camera extension limit of the unit. Camera

tube has a rating of IP67.

Why does the video look “Scrambled”?

• There are two video formats that the inspection camera can be set to:

NTSC format which is used in North America. The PAL format is used in

Europe and other overseas countries. Enter the menu selection and check

the video format to make sure the monitor is in NTSC format.

What format are the pictures and movies saved as?

• Still images are saved in a .jpg format. Movies are saved in a .avi format,

with video resolution at 640 x 480 pixels.

Video Output, will display live video or will it only display playback of

recorded video?

• When connected to a different monitor the unit will display live video as

well as picture and recorded playback.

Downloaded from ManualsNet.com search engine

SPECIFICATIONS

Speciﬁcations

Imaging Sensor CMOS

Total Pixels 640 x 480 (NTSC)

Horizontal Viewing Angle 36 Degrees

Minimum Illumination 0 Lux

Night Vision Range 0.5m/1.64ft

Power Supply 4 x AA batteries

Tube Diameter 9mm

Waterproof Capacity IP67 (for lens/tube only)

LCD Screen Type 2.36”TFT-LCD

Effective Pixels 480 x 234

Video System NTSC

Consumption Current

(Max.) 150mA

Dimensions (H x W x D) 1.77”H x 9.84”W x

3.46”D

Approx. Weight 385g/15.4 oz

Operating Temperature -10 C~50 C/14 F~122 F

Operating Humidity (Max.) 15~85%RH

All specifications are subject to minor change without prior notice.

Downloaded from ManualsNet.com search engine

Autres manuels pour WIC-5000

Table des matières

Autres manuels Whistler Instrument analytique

Whistler

Whistler WIC-960S Manuel utilisateur

Whistler

Whistler WIC-5000 Manuel utilisateur

Whistler

Whistler WIC-2409C Manuel utilisateur

Whistler

Whistler WIC5100 Manuel utilisateur

Whistler

Whistler WIC4750 Manuel utilisateur

Whistler

Whistler WIC-5000 Manuel utilisateur

Whistler

Whistler IC-3409PX Manuel utilisateur

Whistler

Whistler WIC-1750 Manuel utilisateur

Whistler

Whistler WIC-2409 Manuel utilisateur

Whistler

Whistler WIC2750 Manuel utilisateur

Manuels Instrument analytique populaires d'autres marques

Cocraft

Cocraft NLT04 Manuel utilisateur

M&C

M&C GENTWO PMA1000 Manuel utilisateur

MICRO-EPSILON

MICRO-EPSILON optoncdt 1700 Manuel utilisateur

CONDTROL

CONDTROL XP4 PRO Manuel utilisateur

Extech Instruments

Extech Instruments BR200 Manuel utilisateur

Dewetron

Dewetron DEWE-30-16 Manuel du produit

EXTOL PREMIUM

EXTOL PREMIUM 8820043 Instructions d'installation et d'utilisation

RIDGID

RIDGID SeeSnake Compact Manuel utilisateur

Teledyne

Teledyne 3000PA Manuel utilisateur

YDLIDAR

YDLIDAR TIA Manuel utilisateur

Olympus

Olympus IPLEX FX Series Manuel utilisateur

Bosch

Bosch GLM 50 C Professional Manuel utilisateur

Reflecta

Reflecta DigiEndoscope Manuel utilisateur

Chinavision

Chinavision CVACZ-G696 Instructions de montage

Fuji Electric

Fuji Electric ZKMA Manuel utilisateur

Teledyne

Teledyne 3300TA Manuel utilisateur

VOLTCRAFT

VOLTCRAFT IC-100HD Manuel utilisateur

RIDGID

RIDGID micro CA-25 Manuel utilisateur