WhisperPower Piccolo Manuel utilisateur
Whisper Power Remote Control Panel 5 inch
Enjoy Green Energy
Piccolo
Touch Display
whisperpower.com
User Manual
2 WhisperPower Piccolo Touch Display
Revision History
Revision Description
1.0 Original document
WhisperPower Piccolo Touch Display 3
Table of contents
1. Introduction 4
1.1. Firmware Revision 4
1.2. WP50ARM Features 4
1.3. Quick Install 4
2. Installation 5
2.1. Unpacking the Box 5
2.2. Mounting the WhisperPower Piccolo WP50ARM Touch Display 5
2.3. Connecting the WhisperPower Piccolo WP50ARM Touch Display 5
2.4. Checking Connections 5
3. ConguringtheWhisperPowerPiccoloWP50ARMTouchDisplay 6
3.1. Main screen 7
3.1.1 GENERATOR screen 7
3.1.2 SETTINGS screen 7
3.2 MAINTENANCE screen 8
3.3 SYSTEM screen 8
3.4 LANGUANGE screen 9
4. Troubleshooting 10
5. Dimensions 10
6. TechnicalSpecications 11
7. Appendix 11
8. TechnicalSupport 11
4 WhisperPower Piccolo Touch Display
1. Introduction
Congratulations on your purchase of the WhisperPower Piccolo WP50ARM
Touch Display, displaying Generator information. WhisperPower has designed
and built your WP50ARM Touch Display to the highest standards for years of
dependable and accurate service.
WhisperPower Piccolo WP50ARM Touch Display displays Generator data. Please
read this manual carefully and follow these instructions for installation, congu-
ration, and usage of the WhisperPower Piccolo WP50ARM in order to ensure
optimal performance.
1.1. FirmwareRevision
This manual corresponds to WP50ARM PICCOLO rmware revision 1.2.
1.2. WP50ARMFeatures
The WhisperPower Piccolo WP50ARM has the following features:
• Displays Generator information
• Operate Generator (Start/Stop) by user
• Setting of Display parameters by user
1.3. Quick Install
Installing the WhisperPower Piccolo WP50ARM Touch Display involves the fol-
lowing steps.
Please refer to the individual sections for additional details.
1. Unpack the Box (Section 2.1)
2. Mount the WP50ARM (Section 2.2)
3. Connect the WP50ARM (Section 2.3)
4. Checking connections (Section 2.4)
WhisperPower Piccolo Touch Display 5
2. Installation
2.1. UnpackingtheBox
When unpacking the box containing the WhisperPower Piccolo WP50ARM
Touch Display,
you should nd the following items:
1 – WP50ARM WhisperPower Touch Display
1 – WP50ARM User’s Manual
1 – RJ45 Cable
If any of these items are missing or damaged, please contact WhisperPower.
2.2. MountingtheWhisperPowerPiccoloWP50ARMTouchDisplay
Attach the WP50ARM securely to the vessel.
2.3. ConnectingtheWhisperPowerPiccoloWP50ARMTouchDisplay
The WhisperPower Piccolo WP50ARM Touch Displays provide a WhisperCon-
nect connection for the generator; these connection can be found on the back
of the device. The device is powered by an external power source ranging from
6-42V DC.
2.4. CheckingConnections
Once the connection to the generator have been completed, power can be
supplied to the WhisperPower Piccolo WP50ARM Touch Display. Check to see
that information is being properly transmitted by observing the GENERATOR
screen. Refer to Section 4, “Troubleshooting”, if no information appears.
6 WhisperPower Piccolo Touch Display
3.
Conguring the WhisperPower Piccolo WP50ARM
Touch Display
As shipped from the factory, the WhisperPower Piccolo WP50ARM Touch Dis-
plays don’t require any special conguration and will work for most applications.
Congurations with more than one WhisperPower WP50ARM display is possible,
for these special congurations please contact WhisperPower.
3.1. Mainscreen
On the Main screen buttons are provided to enter the Generator and Settings
screens.
WhisperPower Piccolo Touch Display 7
3.1.1. GENERATOR screen
On the Generator screen the generator status is shown. The generator can
be turned on and o. The output voltage, current, power and RPM is shown
together with the historical and maintenance runtimes. Further the starter battery
voltage is shown.
3.1.2. SETTINGS screen
On the Settings screen buttons are shown to access the Maintenance, System,
Language and Display screens.
8 WhisperPower Piccolo Touch Display
3.2. Maintenancescreen
On the Maintenance screen the User Level of the WP50ARM can be set from
User to Expert and Installer. These User Levels are protected by password to
ensure proper setting of the WP50ARM installation.
3.3. Systemscreen
On the system screen a button is provided to reboot the WhisperPower Piccolo
WP50ARM Touch Display.
WhisperPower Piccolo Touch Display 9
3.4. Language screen
On the language screen a dropdown (English/German/Dutch) is provided to set
the WhisperPower Piccolo WP50ARM Touch Display language.
3.5. Displayscreen
On the Display screen settings are provided for the screensaver and the dim-
ming of the screen. The screensaver can be turned on and o and a screensaver
timeout can be set. The dimming can be set on and o and a dimming level can
be set for day and night conditions.
10 WhisperPower Piccolo Touch Display
4. Troubleshooting
Symptom Troubleshoong Procedure
Screen doesn’t turn on
Check the connecons to the WhisperPower Piccolo
WP50ARM Touch Display. Ensure that power is supplied
to the 6-42V DC connecon.
No Generator data
Check the WhisperConnect connecon from the
generator to the WhisperPower Piccolo WP50ARM Touch
Display.
Engine alarms Inverter alarms Inverter warnings
Oil Pressure
Oil Temp
Exhaust Temp
Start Fail
Inspect Engine
Over Speed
AC Short Circuit
AC Over Load
AC Under Voltage
Over Temperature
Communicaon
Parameters
Vdriver Low
Missing Phase
RPM Over Speed
Hi AC Current
Hi RPM
Low RPM
Refer to the WhisperPower Piccolo manual for more informaon on alarms and warnings.
5. Dimensions
WP50ARM
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels WhisperPower Moniteur
