Whirlpool ADP 7611 Manuel utilisateur
Whirlpool is a registered trademark of Whirlpool USA 5019 396 98077
GB
ADP 7611 Quick Reference Guide
Before using the dishwasher, read the user instructions!
WH/I/B/GB
(We reserve the right to make technical modifications)
Add regeneration salt
Only add regeneration salt immediately
before starting a wash programme.
Add rinse aid
“Delayed start” button
The wash cycle can be programmed to start after
3-6-9 hours. Then press the Start button. The wash
programme will start at the set time.
“Half Load” button
The half load cycle can be used for the upper and
lower rack. Select the required programme then
press the “Half Load” button. The light comes on
and goes off at the end of the programme.
The “Half Load” function can be used with
programmes marked with an *.
Antibacterial rinse 4)
This function adds an antibacterial rinse at the end
of the wash cycle, thereby guaranteeing a perfectly
clean and sanitized load. The lamp will light up when
the function is activated. If the temperature is not
maintained during the antibacterial cycle (e.g. if the
door is opened and remains open for a long time),
the lamp will start blinking to indicate that
sanitation is not guaranteed.
1) Reference programme for energy label in compliance with EN 50242
regulations;
2) Refer to “User instructions“;
3) Program data obtained in conformity with European standard EN 50242.
Values may vary in relation to usage, e.g.: different loads, water
temperatures - above or below 15°C - as well as water hardness and
power supply voltage, etc.
4) The bacteria removal efficiency has been tested by the Institut Pasteur
de Lille (France), based on the NF EN 13697 standard of November
2001.
5) These programmes can be used with the Antibacterial rinse option.
Programme selector knob
ON / OFF button
Start button
Switches “on” when the dishwasher is
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
Indicators
Options
Programme chart Detergent 2) Consumption 3)
Programmes Loading instructions A B Litres kWh Minutes
Pre-Rinse cold Crockery to be washed later. - - 5.0 0.02 10
Quickwash 40°C Lightly soiled crockery with no dried-on
food. X - 13.0 0.70 30
Eco *) 5) 50°C Normally soiled crockery. X - 13.0 1.35 90
Normal 1) *) 5) 50°C Normally soiled crockery. X X 16.0 1.05 160
Normal *) 5) 65°C Normally or heavily soiled crockery. X X 16.0 1.65 100
Intensive 5) 70°C Recommended programme for heavily soiled
crockery, especially suitable for pans and
saucepans. X X 17.0 1.90 135
Important
i
n
f
ormat
i
on
f
or Test La
b
orator
i
es:
For detailed information on the EN comparison test and other tests, contact the following address: “[email protected]”.
39698077GB.fm Page 4 Monday, October 25, 2004 12:30 PM
Black process 45.0° 150.0 LPI
WH/II/B/GB
How to use the appliance
Further indications are given in the single chapters and in the user instructions.
Press the ON/OFF button.
Large compartment A:
With each wash cycle.
Small compartment B:
For programmes with pre-wash only.
Mechanical indicator C.
Electric indicator on control panel (if provided).
On models with water softener
system only.
Mechanical indicator D. Electric
indicator on control panel (if provided).
Refer to the dishwasher loading instructions.
The last programme selected will light up.
Select the desired programme (using the specific button or knob).
The corresponding indicator lamp lights up.
If necessary (and if provided) the corresponding indicator lamp lights up.
The selected programme is
then memorised (even in the
event of power failure).
- Only open the dishwasher if necessary
(Warning: beware of hot steam).
- If the appliance is switched off during a
wash cycle, when switched on again it
will resume the cycle from where it was
interrupted.
Only after the START button has switched off: Press the ON/OFF button.
All the indicator lamps switch off.
Warning: when the door is opened steam comes out!
Unload the appliance, starting from the lower rack.
Switch on the appliance
How to fill the
detergent dispenser ABC
Check the rinse aid level
Check the regeneration
salt level
Load the racks
Close the dishwasher door,
turn on the water tap
Select a programme
Select options
Press the Start button
“Change programme”
Press the START button for 2 sec. until
the Start indicator lamp switches off;
Select another programme and press
the START button again.
Wash cycle
Switch off the appliance
Turn off the water tap,
unload the racks
39698077GB.fm Page 1 Monday, October 25, 2004 12:30 PM
Black process 45.0° 150.0 LPI
WH/III/GB
Dishwasher loading instructions and racks provided
Upper rack: depending on the model
Multi-purpose support (A): 1)
Depending on the position, for long-
handles utensils, cups and glasses. May
be used in three different positions.
Crockery holders (B):
Depending on the position, for example
plates, cups and long-stemmed glasses.
Revolving glass support (C): 2)
Depending on the position, for example
small or long-stemmed glasses.
Long-handled utensils (e.g. carving
forks, knives) must be arranged
with the sharp end facing in
towards the appliance.
Half Load:
Load the upper rack only.
Place the cutlery basket (D) in the
upper rack.
Rack height adjustment
(also when loaded):
•Lower adjustment: pull out the
two rack handles outwards (E)
and lower the rack.
•Upper adjustment: pull the two
handles (E) upwards until the rack
clicks into place (Factory setting).
The rack must be level on both
sides.
Removing the top rack to provide
clearance for large items of
crockery in the bottom rack:
Open the rack guideretainers (F) on the
right and left and remove the top rack.
When the upper rack is in place the
retainers must always be closed.
Lower rack:
Depending on the model with fixed or
tilting plate holders (G).
Half Load:
Load the lower rack only.
Greater washing power, particularly
for plates and saucepans.
Cutlery basket (J) or (H):
Some models are provided with a grid
(I) that can be fitted onto the cutlery
basket to keep items separated.
Cutlery basket (D), if provided, for
appliances with half load only.
Sharp knives and forks that might
cause injury must be placed in the
cutlery basket with the sharp end
facing downwards.
Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher,
for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery.
Spare parts which are sold separately:
1) Multi-purpose support (A) - N. AMH 369 series.
2) Revolving glass support (C) - N. WGH 1000 series.
FF
Retainer
closed Retainer
open
39698077GB.fm Page 2 Monday, October 25, 2004 12:30 PM
Black process 45.0° 150.0 LPI
WH/IV/GB
What to do if...
If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem
(* see also the corresponding chapter in the user instructions).
Problem Cause Remedy
The appliance is not
working • No water supply. • Open the tap.
• The appliance does not load
sufficient water. • Clean the water supply tap filter.
• Ensure there are no kinks in the water hose.
• There is a power failure. • Insert the plug into the mains socket.
• Press the Start button.
• Close the door.
• Check the domestic circuit fuse.
• Starting the selected programme. • The programme can be set to “0” to start.
If crockery is not
perfectly dry • Insufficient rinse aid. • Increase dosage *.
• Residual water in cavities. • Load crockery at an angle.
If crockery is not
perfectly clean • The water jet does not reach
the crockery. • Arrange crockery so that items do not touch each
other.
Load crockery upside down.
• Insufficient detergent. • Follow recommended detergent dosage.
• Unsuitable programme. • Select a more intense wash cycle.
• Spray arms blocked. • The spray arms must be able to turn freely.
• Spray arm nozzles clogged. • Remove any impurities obstructing the water flow *.
• Incorrect detergent/detergent too old. • Use a good quality detergent.
Sandy or grainy residues • Clogged filters. • Check filters regularly/if necessary clean *.
• Filters incorrectly assembled. • Insert the filter correctly *.
Colour of plastic parts
faded • Tomato/carrot juice,... • Depending on the material, if necessary use a
detergent with a greater whitening power.
Deposits on crockery
• removable • Streaks on the crockery/glasses. • Increase the rinse aid dosage *.
• Streaks on glasses. • Reduce the rinse aid dosage *.
• Layer of salt on crockery/glasses. • Close the salt container lid properly *.
• not removable • Insufficient water softening,
calcium deposits. • Change water hardness setting, if necessary add
salt *.
Opaque glasses/
glasses not sparkling • Cannot be washed in the dishwasher. • Use suitable glasses.
Rust on cutlery • Not made of stainless steel. • Use suitable cutlery.
Identifying appliance
faults • The START indicator lamp flashes.
• Indicator F... (if provided). • Ensure the filter assembly is not clogged and that
there is no interruption to the water supply
(if necessary, clean the filters *). Start the programme
again. Press the START button for 2 seconds, until the
START indicator lamp switches off. Select a new
programme and press the Start button again.
If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the
water supply tap, then call our After-Sales Service (see guarantee).
Before contacting our After-Sales Service, take note of the following:
• The nature of the fault.
• The appliance type and model.
• The service code (the number indicated on the adhesive rating plate)
inside the door on the right-hand side.
39698077GB.fm Page 3 Monday, October 25, 2004 12:30 PM
Black process 45.0° 150.0 LPI
Autres manuels Whirlpool Lave-vaisselle
Whirlpool
Whirlpool ADP 963 WHM Manuel utilisateur
Whirlpool
Whirlpool ADG 8440 Manuel utilisateur
Whirlpool
Whirlpool GDU4050XPW1 Manuel utilisateur
Whirlpool
Whirlpool ADP 6941 Manuel utilisateur
Whirlpool
Whirlpool GDP8500XX Manuel utilisateur
Whirlpool
Whirlpool WDF518SAAB Manuel utilisateur
Whirlpool
Whirlpool IKEA DWF 406 Manuel utilisateur
Whirlpool
Whirlpool DU810SWPT Manuel utilisateur
Whirlpool
Whirlpool DU920PFGQ2 Manuel utilisateur
Whirlpool
Whirlpool ADP 4695 IX Manuel utilisateur
Whirlpool
Whirlpool DU9900XR Series Manuel utilisateur
Whirlpool
Whirlpool MaxiSpace W7F HS41 X Manuel d'installation et d'exploitation
Whirlpool
Whirlpool ADP6000WH Manuel utilisateur
Whirlpool
Whirlpool WIC 3C26 F Manuel d'installation et d'exploitation
Whirlpool
Whirlpool WDF760SAD Instructions d'utilisation
Whirlpool
Whirlpool WDF520PADM Manuel utilisateur
Whirlpool
Whirlpool DISHWASHERS Manuel utilisateur
Whirlpool
Whirlpool GU2700XTSB1 Manuel utilisateur
Whirlpool
Whirlpool DU8300XT Series Manuel utilisateur
Whirlpool
Whirlpool 8000 Series Manuel utilisateur
