Wfly WFT02 Manuel utilisateur

V1.3

INSTRUCTION MANUAL

www.wflysz.com

Attention

Please read the instruction before using the product

Please keep this manual

ONONONON

WFT07

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Thank you for purchasing the WFLY product

Features

1.The large dot matrix LCD display: multi-language, graphical display. simple design, easy operation.

2.Original 2.4G technology : use of data transfer, greatly improve the handling agility. fully express

the fast Lightning : (Note: is WFLY exclusive technology).

3.Low-voltage design, lower battery consumption, a variety of battery available:such as 4S alkaline batteries ,

4S NiMH(Nickel Metal Hydride),1S lithium-ion battery ,1S lithium polymer battery . Voltage range 3.7V-6V.

4.Super anti-interference: the high spread spectrum (DSSS) + frequency hopping, can boot the 60 sets

at same time without interfere.

5.This RC equipment supports 3 groups of programmable mix.

6.Can store 10 groups of model data .

7.Functions design optimized,operation convenience.

Service

1.The WFLY warranty the quality of science and technology within a year (WFLY technology to bear the

postage, the user must provide a warranty card and proof of purchase,Indispensable).

2.Warranty card and proof of purchase effective by signed and sealed by the seller , and the information

must be completed.

3.Artificially damaged and over one year after the warranty period, the WFLY provide life long science

and technology service,only the users pay return postage, materials fees and maintenance costs.

4.This warranty is limited to China's remote control and accessories sales .

5.Seller does not give warranty card or do not fill out required from the seller to bear all the after-sales service.

ONONONON

Ⅰ

WFT07 Remote control device contents

WFT07 Remote control device

WFT07 RC device parts of the name(front)

WFT07 RC device parts of the name( back)

Instructions of the 2.4Ghz receiver

WFT07 code match instructions

Trainer function

Special symbal instructions

WFT07 RC device characteristics

Express of input and buttons

Adjustment of stick head

Replacement throttle hand

Helicopter Functions

System Settings

Input mode and Functions

1.Model parameters

2.Model Settings

3.Coaching / Simulation

4.Control stick settings

5.Control stick Calibration

6.Restore factory settings

7.Tone settings

8.Contrast settings

9.Power supply scheme

10.Version information

Preferences

1.Monitor

2.Dual Rate

3.Servo Reverse

4.End point

5.Sub trim

6.Trim settings

7.Throttle curve settings

8.Pitch curve settings

9.Throttle cut settings

10.Throttle holding settings

11.Timer

12.Swashplate

13.Gyro sens mixing

14.Advanced settings

CONTENTS

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Ⅱ

CONTENTS

Advanced settings

1.Speeder mixing

2.Programmable mix setting

3.Fail safe

3.Code match

system settings

Airplane Functions

Input mode and functions

1.Model parameters

2.Model settings

3.Coaching / Simulation

4.Control stick settings

5.Control stick calibration

6.Restore factory settings

7.Tone settings

8.Contrast settings

9.Power supply scheme

10.Version information

Preferences

1.Monitor

2.Dual Rate

3.Servo Reverse

4.End point

5.Sub trim

6.Trim settings

7.Flaperon mixing

8.Flap trim

9.Aileron diff control

10.Elev-flap

11.Throttle curve settings

12.Throttle cut settings

13.Throttle holding settings

14.Timer

15.Advanced settings

Advanced Settings

1.Elevator mixing

2.Ele-Aileron mixing

3.V-tail

4.Ail-2

5.Programmable mix setting

6.Fail safe

7.Code match

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

1.WFT07 remote control device 2. WFR07S 2.4Ghz receive

3.Simulator switch cable 4.Transmitter 4cell battery case

5.Manual 6.WFLY neck strap

1.WFT07 remote control device 2.WFR07S 2.4Ghz receive 3.Simulator switch cable Manual

4.Transmitter 4cell battery case 6.WFLY neck strap

WFT07 Remote control device contents

WFT07 remote control device diagram

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

5.Manual/CD-ROM

1 set

1 Root

1 This/zhang

1 Only

1 A

1 Article

ONONONON

K1 K2 K3 K4

Antenna(rotatable)

Power light RF light

Buzzer

Elevator trim

Rudder/

elevator stick

Rudder trim

Throttle trim

Aileron/

throttle stick

Power switch

Neckstrap

attachment

Aileron trim

Left

Right

Down

Exit

Add

Reduce

LCD OK

K1: 2 stalls. Throttle holding and throttle cut K2: 3 stalls. Timer , airplane 5channel and airplane Elev-flap mixing.

K3: 2 stalls. Dual rate, Fight mode (normal,special IDLE) K4: Trainer. 7channels

WFT07 RC device parts of name

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

WFT07 RC device Positive

(Right hand throttle)

WFT07 RC device back

WFT07 RC device parts of name

Trainer/DSC

Handle

Battery cover

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Instruction of 2.4Ghz receiver

Model:WFR07S

Type: 7channel 2.4Ghz receiver,4096 resulotion(in the PCMS 4096 resolution)

(Adaptation WFLY 2.4Ghz series),ORGANIC 2.4G

Voltage :4.8V-6V

Current:30mA

Weight:9.6g

Size: 40.42mm x27.27mm x11.88mm

Frequency: 2.400GHz-2.483GHz

1．AIL：Aileron

2．ELE：Elevator

3．THR：Throttle

4．RUD：Rudder

5．GRY： Landing Gear/Gyro

6．PIT： Pitch

7．Auxiliary channel

(Channel 1)----------

(Channel 2)----------

(Channel 3----------

(Channel 4)----------

(Channel 5)----------

(Channel 6)----------

(Channel 7)----------

WFLY PCMS receiver can compatible with PCMS 4096, PCMS 1024 and PPM modulation

(Adaptive), and have fail safe function.ORGANIC 2.4G

(Note: Any channel can be used as power input)

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

WFT07 instructions of the code match

1.Remote control device settings

●unction instruction:

The remote control for the 2.4G spread spectrum,

frequency hopping systems, have high anti-

interference. The remote control has unique

address identification code information, Before

use the remote control,pls match the code with the

2.4Ghz receiver.

●Settings

Into the "Advanced Settings" menu item under the

"Preferences" . Press confirm button to enter the

"code" interface in the "Advanced Settings" . As

above. The specific settings as follows: 1. The

first use the button to select on the code, the code

process needs within a short distance. 2.4G

module system in the closed state is not available,

please refer to “ Once Code Coaching / Simulation”

successfully will return to the menu. Also can press

"exit”button to return.

Warning

When using this function, please ensure that no other remote control operating!

2.Receiver Settings

Remote control device into this interface:

Then going receiver settings: receiver hold "SET" button until the STATUS indicator light flashes slowly, waiting for

the transmitter of the code instructions.

(WFR07S/WFRO9S operating are same)

LED Slow flashing

After the success of the code ,the LED light is off, you can normally using.

Note: The code required in a short distance.

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Trainer Function

Instruction of the Training function

The same two remote control devices WFT07 can do the Trainer function:

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

1. Using the simulator cable to connect two WFLY equipment.

2. Trainer settings: Press MENU key to boot into the "System Settings" function, enter "

Training / simulation "menu,selected the" trainer mode ", (effect after re-boot ).

3. Student machine setting: Press MENU key of the another radio into the "System Settings" function,

entry "Training / simulation "menu,selected the " Simulator Mode ", (effect after re-boot ).

4. Release Trainer switch K4, this time the student machine does not sending signal, the operation

completed by the trainer.Advance push the trainer switch K4, then operation completed by the

Student machines now.

Settings:

Table des matières

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation