Westinghouse WRC613S Manuel utilisateur
INSTALLATION AND USER MANUAL
WRC613S Canopy Rangehood
WRC913S Canopy Rangehood
CONGRATULATIONS
Congratulations and thank you for choosing our canopy
rangehood. We are sure you will find your new rangehood
a pleasure to use. Before you use your rangehood, we
recommend that you read through the whole user manual,
which provides the description of the rangehood and
its function.
To avoid the risks that are always present when you use an
electrical appliance it is important that the canopy
rangehood is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners. After
unpacking the canopy rangehood please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Service Centre.
Conditions of use
This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, offices and other
working envionments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
Record model and serial number here:
Model:
Serial No:
TIPS & INFORMATION
IMPORTANT – CHECK FOR ANY DAMAGES OR MARKS. If you find
the rangehood is damaged or marked, you must report it
within 7 days if you wish to claim for damage/marks under
the manufacturers warranty. This does not affect your
statutory rights.
UNPACKING
Check that the cooker hood has no damage.Transportation
damage should immediately be reported to the company
responsible for the transportation.
Damage, faults and missing details should immediately be
reported to the retailer. Take care of the packing materials so
that small children cannot play with them.
ENVIRONMENTAL TIPS
INFORMATION ON DISPOSAL FOR USERS
• Most of the packing materials are recyclable. Please
dispose of those materials through your local recycling depot
or by placing them in appropriate collection containers.
• If you wish to discard this product, please contact your
local authorities and ask for the correct method of disposal.
CONTENTS
Important safety instructions
Description of your rangehood
Components list
Technical specifications
Rangehood dimensions
Installation
Using your rangehood
Care & maintenance
Troubleshooting
Optional ducting accessories
Warranty
. . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
IMPORTANT SAFETY INSTRUCTIONS
This manual explains the proper use of your new
Westinghouse canopy rangehood. Please read this manual
carefully before using the product. This manual should be
kept in a safe place for handy reference.
This canopy rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
Meanings of symbols used in this manual are shown below:
CAUTION
This symbol indicates the possibility of injury or damage to property
This symbol indicates never to do this
This symbol indicates always do this
TIPS & INFORMATION
This symbol indicates tips and information about use of the appliance
ENVIRONMENTAL TIPS
This symbol indicates tips and information about economical and
ecological use of the appliance
CAUTION
Read the following carefully to avoid an electric shock or re.
GENERAL WARNINGS
The appliance must be plugged into its own
dedicated 220-240V, 50Hz AC electrical outlet.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for their safety.
Ensure the canopy rangehood is switched off before
carrying out maintenance, to avoid any possibility of
electric shock.
Never carry out flambé cooking under the canopy
rangehood.
This canopy rangehood is not recommended for
barbecues and cannot be installed for external use.
Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not
be discharged into any heating flue, which may
carry combustion products from other sources. (Fig1)
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when
the canopy rangehood is used at the same time as
appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when
canopy rangehood is in use.
Always switch off gas burners before you remove pots
or pans.
Do not leave lit gas burners exposed due to the risk
of fire. (Fig 2)
ELECTRICAL CONNECTION
Check that the mains voltage matches with the voltage on
the data plate inside the canopy rangehood. Check that the
installation complies with standards of local building, gas
and electrical authorities. Before connecting to the mains
supply ensure that the mains voltage corresponds to the
voltage on the rating plate inside the cooker hood.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
SAFETY WARNINGS – FOR THE INSTALLER
When installing the cooker hood, make sure you adhere to
the minimum and maximum distances from the cooker hood
base to the hob surface (refer to page 5).
Exhaust flue installation: The following rules must be
strictly followed to obtain optimal air extraction.
• Keep exhaust flue short and straight
• Do not reduce the size or restrict exhaust flue.
• Keep bends in the exhaust flue to a minimum.
• When using flexible flue always install duct with helix
pulled taut to minimise pressure loss.
• Failure to observe these basic instructions will drastically
reduce the performance and increase the noise levels of
the cooker hood.
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for that purpose.
The exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion products
from other sources.
NOTE: Some installations may require the telescopic
exhaust cover to be cut to length. Cut with sharp tin snips
or a fine-tooth hack saw blade, taking care not to distort or
dent the exhaust cover.
Fig. 1 Fig. 2
3
DESCRIPTION OF YOUR RANGEHOOD
Components list
1. Telescopic flue cover set
2. Upper Flue mounting bracket
3. Lower Flue mounting bracket
4. Flue transition duct
5. Main body and fan housing assembly
6. Grease filter(WRC613S)
6. Grease filter(WRC913S)
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
- - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
Additional items required for installation
• Fixings required to attach rangehood body and anti
tilt points
• Fixings required to attach flue cover mounting brackets
• Worm drive clamps, Duct tape or cable ties
• Ducting accessories
Technical specification
• Power supply: 240 Volts 50 Hz. Connects to 10A power
point
• Lights: 2 x 4 watt, 240 volts LED
MODEL
Height
Width
Depth
Max absorbed power
Lighting
Outlet diameter
Electrical connection
WRC613S
660 mm – 1,160 mm
600 mm
500 mm
338 W
2 x 4W LED (GU10 fitting)
150 mm
220 – 240V, 50 Hz
The manufacturer reserves the right to make technical changes.
Fig. 3
1
2
3
4
5
6
WRC913S
660 mm – 1,160 mm
900 mm
500 mm
338 W
2 x 4W LED (GU10 fitting)
150 mm
220 – 240V, 50 Hz
Qty.
1
1
1
1
1
2
3
4
RANGEHOOD DIMENSIONS
WRC613S
Fig. 4
320 290
625
Min 660 / Max1160
500
600
520 320
320 290
500
320
900
780
625
Min 660 / Max1160
WRC913S
5
INSTALLATION
PRE-INSTALLATION
LOCATION
Before installing the cooker hood, peel off any protective plastic covering and remove polystyrene from inside behind
the fan motor. See Fig. 5 below.
The hood is to be mounted on the wall. When installed, the hood must be not less than 60cm above electric burners or
65cm above gas or mixed-fuel burners.
Fig. 5
Distance from hood base to top of hob
hob type minimum* maximum
gas 650mm 800mm
electric 600mm 800mm
* If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum height
for installation.
6
INSTALLATION
1. Using a spirit level mark a vertical centre line on the wall where the hood is to be positioned, and a horizontal line
at the hood base position. (See Figure 4 for relevant model)
NOTE. The height of the underside of the hood body must be a minimum of 600mm* to a maximum height of 800mm.
* If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum
height for installation.
2. Mark the location for the flue cover wall mounting brackets and rangehood mounting points and anti-tilt fixing
points above the hood base using the hood base as a reference point
Fig. 6
WRC613S WRC913S
A
B
600 mm
440 mm
900 mm
550 mm
Max. 1160 mm
An lt fixing point
Range hood
mounng points
Flue cover wall
mounng brackets
Min. 600 mm*
Max. 800 mm
ceiling
130 mm
250 mm
230mm
250 mm
A
587 mm
307 mm
51 mm
B
Top of hob
7
INSTALLATION
3. Install flue cover wall mounting brackets with suitable
fixings. Install suitable screws for rangehood mounting
points (to support a total weight of 30kg) to the wall as
marked (Fig. 7).
2mm
A
B
5. Hang the body hood on the mounting screws then
secure at the anti-tilt locations as indicated in Fig. 6 & 7.
4. Fix exhaust transition duct using screws supplied (Fig. 8).
Fig. 7
Fig. 9
Fig. 8
A
B
8
INSTALLATION
Depending on the preferred installation/ducting mode,
follow step 6a or 6b below.
6a.Recirculating mode (Fig. 10). Using the centre line,
secure the recirculating T-piece to the wall with suitable
screws/fixings (optional kit AR910RK). Install flexible
pipe between T-piece and the exhaust transition duct.
Use cable ties or suitable duct tape to secure flexible
pipe to T-piece and transition duct (Fig. 12).
NOTE: When installed in recirculating mode, it is
recommended to use a carbon filter (included in
recirculation kit AR910RK) to prevent odours being
emitted back into the room.
6b.Ducted mode (Fig 11.) Fit a 150mm diameter non
combustible flue pipe. Continue the centre line to the ceiling.
Fit flue pipe to the fan transition duct. Use cable ties or
suitable duct tape to secure flue pipe to the transition duct.
NOTE: For ducted mode, extend the flue pipe through
the roof to external ‘china hat’ to vent exhaust externally.
Do not vent into the ceiling cavity.
NOTE: To ensure optimum performance of the
rangehood, the use of rigid ducting is recommended.
The use of bends should be avoided. Rigid flexible
ducting is suitable, although loose flexible ducting is
unacceptable. All ducting must be fire retardant.
Fig. 10
Fig. 11
Fig. 12
9
INSTALLATION
7. Electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the rangehood.
8. Installation of telescopic flue covers
Separate the inner and outer flue covers, and carefully
remove the protective coating from both. Carefully
reassemble the upper and lower flue covers sections by
sliding the inner into the outer flue cover. Carefully lower
the assembled upper and lower flue covers onto the top
of the rangehood body, and insert the flue cover into the
rangehood body approximately 5mm. Fix upper flue cover
to the wall mounting bracket with screws supplied. Ensure
that the upper section is extended.
Fig. 13
Fig. 14
Fig. 15
If installed in recirculating mode, insert the optional carbon
filter (included in recirculation kit AR910RK).
To complete the rangehood installation, insert the filters to
the underside of the hood body. Place back edge of filter
into position and push up front edge so that the filter clips
into place.
Your Westinghouse rangehood is now ready to use.
Care must be taken to ensure the screws are not cross
threaded when attaching the upper flue cover.
CAUTION
10
Ce manuel convient aux modèles suivants
1
Table des matières
