Westinghouse RTS Series Guide de démarrage rapide
Page 1
Westinghouse RTS Series Lock
Installation and Operational Manual
Overview
The RTS Series delivers uncompromising commercial-grade quality. This lock is a true
workhorse, tested to over 2 million duty cycles. The RTS has a 3-hour UL fire-rated
latch and a free-wheeling clutch. The outdoor portion is weather resistant. When used
with the MS1 Management System (sold separately) you can configure all of your locks
and manage all user information from a central system administrator‟s position.
The RTS provides you with the versatility to manage access control using both
fingerprint recognition and PIN codes. The MS1 access control and audit trail features
track exactly who has been in your facility and when.
Please read all documentation carefully before installation & use. This manual details all
installation procedures.
Manufacturer and/or Distributors of the RTS will not be responsible for any damages
caused by incorrect installation or mishandling of the lock. Any such damages will void
manufacturer‟s warranty. Further information on the warranty terms and conditions can
be found in Appendix A to this manual.
Important: The RTS outside (front) unit has been designed for weather exposure.
Exposure of the inside (back) unit to the elements will void manufacturer warranty. See
Appendix A to this manual for further information under “Warranty Terms and
Conditions”
Page 2
Features
Up to 1,000 finger print and/or PIN enrollments
Backlit PIN keypad for easy use at night
Rugged Zamak 5 cast enclosure with Satin Chrome finish
5 second access time before door re-locks
Heavy Duty components rated to over 2 million cycles
UL-Listed, ANSI Grade 2 tubular latch with 3-hour UL fire-rating
Backset 2 3/4″
Commercial grade 6-pin rim cylinder (removable) with SC4 keyway (3 keys included)
Free-wheeling clutch design
IP56 tested ensures resistance to humidity, dust, and rain
Rated for -40°F to 150°F
ADA compliant handle is non-handed for right or left hand installation
Temporarily Unlock Mode Support (“TUMS”) opens and closes lock on pre-defined
schedule
Battery life provides minimum 1,800 openings
1
Low battery alert
Non-volatile memory not lost when batteries removed or replaced
RS485 compatible for serial communication
Normally open contacts to activate relays (rated at 1A @ 20vdc and 0.5A @ 125vac)
2 programing modes
- At the lock using the LCD and keypad
- Via the MS1 Management System
Easy to Delete Individual users
Access Control features:
- Open Mode
- Timed Lock Access
- Timed User Access
- Import Records
- Export Records
2 Year Limited Warranty
Specifications
Fingerprint sensor - CMOS Optical, 4rd Generation high resolution, backlit, coated
Verification Type
1 to N (PIN or fingerprint only)
1 to 1 (User ID + FP or PIN)
Scanning Time < 1 second
Recognition Time < 1 second/user
False Accept Rate (FAR) < .001%
False Reject Rate (FRR) < .01%
Dimensions: 1.5" D x 3" W x 9.5" L
Weight: 9 Lbs.
Door Thickness: 1 1/2" to 2" compatible with most standard wood, metal or fiber glass
doors: not for use on doors that use exotic woods or glass doors
1
May vary based on actual conditions
Page 3
MS1 Management System
This Manual describes how to program the RTS Series manually at each lock. To take
full advantage of the RTS features you must use the MS1 Management System for
programming. This software enables you to program one or more locks from a PC. The
MS1 is sold separately and has a separate installation manual. Contact your distributor
for more pricing and availability. You can also go to www.westinghousesecurity.com for
more information about the MS1.
Page 4
Contents
Section 1: Tools/Parts...................................................................................................6
Section 2: Pre-installation ............................................................................................7
2.1 Mark and bore holes on the door.......................................................................................... 7
2.2 Setting/Installing the latch and strike plate ........................................................................... 8
2.3 Removing handles and re-installing for Right/Left handed configuration .............................. 9
Section 3: Installation.................................................................................................10
3.1 Installing the Outside Unit ...................................................................................................10
3.2 Installing the Fixing Plate ....................................................................................................12
3.3 Removing Battery Cover.....................................................................................................13
3.4 Installing the Inside Unit......................................................................................................13
3.5 Installing the Antenna (for the RTS-Z and RTS-PZ) ............................................................16
Section 4: Power Options...........................................................................................16
4.1 Installing the Batteries.........................................................................................................16
Section 5: Hard Reset.................................................................................................18
Section 6: Unlocking (RTS and RTS-Z only).............................................................19
6.1 1: N Mode (Enrolled user with an enrolled fingerprint).........................................................19
6.2 1:N Mode (User with a registered PIN Code) ......................................................................20
6.3 1:1 Mode with an enrolled fingerprint...................................................................................20
6.4 1:1 Mode with a registered PIN Code..................................................................................21
Section 7: Lock Programming Instructions..............................................................22
7.1 Menu Buttons......................................................................................................................23
7.2 Date/Time...........................................................................................................................25
7.3 Sensitivity (RTS & RTS-Z)...................................................................................................29
7.4 Match Mode........................................................................................................................30
7.5 Lock ID................................................................................................................................31
7.6 Clear FP&PIN .....................................................................................................................32
7.7 Access Time .......................................................................................................................34
7.7.1 Invalid ..............................................................................................................................35
7.7.2 Anytime............................................................................................................................37
7.7.3 Acc-Time:.........................................................................................................................37
7.8 Weekday.............................................................................................................................41
7.9 Timed TUM.........................................................................................................................42
7.9.1 Timed TUM - Setup Menu................................................................................................43
7.9.2 Cancel TUM.....................................................................................................................43
7.9.3 Setup Days ......................................................................................................................44
7.9.4 View TUM Settings...........................................................................................................47
7.9.5 Setup Holidays.................................................................................................................48
7.9.6 Upload User Records via the Flash Drive from the MS1 software ....................................54
Section 8: Finger Print Management (RTS & RTS-Z)................................................55
8.1 Enrolling Fingerprints..........................................................................................................57
8.2. Add or modify a User PIN...................................................................................................61
8.3 Deleting Fingerprints and PINs (RTS & RTS-Z) only)..........................................................62
8.4 Changing Access Time for Individual Users........................................................................64
8.4.1 Example –Access Time for a specific User ID.................................................................65
Page 5
Section 9: External Applications................................................................................70
9.1. Auxiliary Power Connection ...............................................................................................70
9.2. Normally Open (N.O.) Relay Contacts................................................................................71
9.3. RS485 Serial Interface.......................................................................................................72
Section 10: Support Information................................................................................73
Limited Warranty.........................................................................................................73
Appendix A –User Enrollment Table ........................................................................74
Page 6
Section 1: Tools/Parts
Required tools/Items:
One electric or battery operated drill
One 3/8” diameter drill bit
A pair of scissors or utility knife
One Phillips head screwdriver
Hacksaw or handheld bolt cutters
Tape measure
One long, thin shafted Phillips head screwdriver
“Fish Tape” for routing LAN cable through door
4 AA Alkaline batteries
Please familiarize yourself with all the parts in the RTS package. If any parts are
missing or damaged, contact your distributor immediately. Note: bag E is only included
with Z-wave products.
Note: Bags B, C, and D will have different content depending on your type of latch
configuration.
Outdoor unit
Indoor Unit
2x handles
A
B
C
D
E
Template
3 Keys
Rubber Gaskets
Page 7
Section 2: Pre-installation
Note: If you currently have a Mortise lock, please refer to the conversion kit instructions
that came inside the RTS box. If your door is brand new, please proceed with the
following instructions.
2.1 Mark and bore holes on the door
1) Remove existing handle set.
2) Line up the installation template to the existing hole on the door. Ensure that the
template is square by observing the vertical dotted line which should line up with the
edge of the door. Mark the holes on the door with a permanent marker through the
holes on the template.
Page 8
3) The door should look similar to the picture below after the holes are drilled.
2.2 Setting/Installing the latch and strike plate
1) Remove Bag “A”from the Box. The latch that is included is for doors that have 2 3/4”
backsets.
2) Insert the latch into the hole in the edge of the door and screw it into place, making
sure that the center of the latch‟s spindle hole is in the center of the drilled 2 1/8” hole.
Page 9
3) Screw the included strike plate into the doorjamb.
2.3 Removing handles and re-installing for Right/Left handed configuration
1) Remove Bag “B” from the Box. The RTS is a non-handed lock, meaning that it can
be installed on either a right handed or left handed door. Use the following steps to
install the handles:
2) Insert outside unit‟s handle onto the
front of the lock based on your right/left
handed configuration.
3) Turn the outside unit over, insert the
handle screw into the spindle hole.
Page 10
Section 3: Installation
3.1 Installing the Outside Unit
4) Tighten the handle screw using a
Phillips screwdriver.
1) Attach the rubber gasket to the back of
the outdoor unit. Repeat this step for
inside unit.
5) Repeat the above steps for the inside
section of the lock.
Autres manuels pour RTS Series
2
Table des matières
Autres manuels Westinghouse Verrouillage
