Westcott FJ200 Strobe Manuel utilisateur
FJ200 Strobe
User Manual
V1.0.3
7/09/2021
Contents
Contents 1
Introduction 3
Components (Included) 4
Important things to know before starting… 4
Reviewing Firmware Files 4
TTL ±3 Flash Exposure Compensation 4
Canon Continuous Mode 4
Flashes Per Charge 4
FJ200 Strobe: Body Overview 5
FJ200 Strobe: Control Panel Overview 5
FJ200 Strobe: LCD Display & Menus 6
FJ200 Strobe: Warnings 7
FJ200 Strobe: Firmware Updates 8
Installing the Firmware 8
FJ200 Strobe: Getting Started 9
Charging the FJ200 Lithium Polymer Battery 9
Reinserting the FJ200 Lithium Polymer Battery 9
DC Power Operation 9
AC Power Operation 10
FJ200 Strobe: Mounting 10
Mounting to a Light Stand 10
FJ200 Strobe: Attaching & Removing Modifiers 10
Connecting the FJ200 Metal Reflector & Compatible Modifiers 10
Removing the FJ200 Metal Reflector & Modifiers 11
Attaching an Umbrella-Based Modifier 11
Removing an Umbrella Based Modifier 11
FJ200 Strobe: FJ Wireless Communication 11
FJ200 Strobe: Exposure Modes 12
Enabling ‘TTL’ Mode Operation 12
Enabling ‘Manual’ Mode Operation 12
FJ200 Strobe: SYNC Functions 13
Enabling ‘Normal’ Sync 13
Enabling ‘HSS (High-speed Sync)’ 13
1
Enabling ‘Freeze Sync’ 14
Freeze Sync Flash Durations 14
FJ200 Strobe: Advanced Functions 14
Continuous Capture 14
FJ200: Settings Menu 14
Navigating the Settings Menu 14
Settings Options 15
FJ200 Battery: Performance and Care 15
FJ200 Battery Performance 15
FJ200 Charging & Life Expectancy 15
FJ200 Strobe: Technical Specifications 16
Warranty Information 18
Legal Information 19
2
Introduction
Thank you for purchasing the Westcott FJ200 Strobe. The FJ200 is the perfect companion to the
growing family of FJ series of wireless communication products; FJ400 Strobe, FJ80 Touchscreen
Speedlight, FJ-X2m Wireless Trigger & FJ-XR Wireless Receiver (all sold separately). The FJ200’s
multi-brand camera compatibility, extended flash tube, and round head make it the ideal compact strobe
for practically any occasion. We know that you’re going to love it!
The FJ200’s flash tube’s placement provides a more natural light output mimicking the big light in the sky
leading to more appealing catchlights in your subject’s eyes. It also evenly fills up cylindrical modifiers
from the center to the edge. The concept of a square peg and a round hole has never been ideal, so why
settle for that in your photography? Not to mention, it’s equipped with virtually the same features and
functionality as the FJ400, so the FJ200’s there when you need a strobe that’s a little more compact for
those on-location shoots.
One last thing and this is the important one. Don’t forget that Westcott HQ is based in Maumee, OH and
our team’s available to answer your questions, Monday-Friday 9am-5pm ET. We also have a community
of Westcott loyal users who are ready to share their tips-and-tricks via the Westcott Lighting Community
on Facebook during the week or on the weekend.
We hope you’re excited to get started with your new strobe because we’re excited to see what you
create.
Thank you for your business.
-Team Westcott
3
Components (Included)
●FJ200 Strobe
●FJ200 Lithium Polymer Battery
●FJ200 Battery Charger & Cord
●FJ200 30° Honeycomb Grid & Clip
●FJ200 Gel Pack (Red, Green, Blue, Yellow, Orange, & Diffusion)
●FJ200 Reflector (FJ200 Mount, 5")
●FJ200 Tilter Bracket
●FJ200 Flash Tube
●FJ200 Flash Tube Cover
●FJ200 Travel Case
Important things to know before starting…
Reviewing Firmware Files
Firmware updates will be made available on the FJ200 product page (https://www.westcott.com/4740)
to improve the performance of the FJ Wireless System. Please review ALL documentation that’s included
with each firmware download to ensure all of the necessary steps for preparation are complete before
installing the firmware.
TTL ±3 Flash Exposure Compensation
±3 TTL Flash Exposure Compensation (FEC) on the FJ-X2m Wireless Trigger or FJ80 Universal
Speedlight is independent of the Flash Exposure Compensation (FEC) on the FJ200 Strobe. Meaning, a
change of the FEC ±3 on the FJ-X2m or FJ80 will adjust the light output in TTL mode, however, the
FJ200 screen will not indicate the FEC changes made on the FJ-X2m or FJ80. The FJ200 FEC can be
further adjusted ±3 on the light directly.
Canon Continuous Mode
When photographing in Canon Continuous Mode, two overlapping-squares will be visible on the FJ-X2m
& FJ200 displays and the FJ Wireless System will default to Manual Mode; disabling TTL and HSS
functionality. Exit Continuous Mode on the Canon camera to resume TTL and HSS functionality.
Flashes Per Charge
The FJ200 was designed to achieve 450+ full-power flashes with every battery charge. Achieving this
requires that the screen intensity be set to MIN in the Settings Menu.
4
FJ200 Strobe: Body Overview
FJ200 Strobe: Control Panel Overview
5
FJ200 Strobe: LCD Display & Menus
6
FJ200 Strobe: Warnings
Caution
●IMPORTANT: During operation, the flash tube, LED modeling lamp, and select components of the
FJ200 strobe temperatures will increase. Please use caution while using to avoid serious burns
or injuries.
●Use only with the Westcott FJ200 Lithium Polymer Battery and/or AC Power Adapter and Cord.
●Do not touch the flash tube, LED modeling lamp, metal reflector, metal snoot, and other metal
components and accessories after immediate use to avoid potential injury.
●Never leave unattended around children and/or pets.
●Keep away from fire, water, and moisture.
●Do not submerge in water.
●Avoid drastic temperature changes before, during, or after use.
●Avoid direct skin contact with the flash tube and LED modeling lamp when replacing the flash
tube.
●Always remove the FJ200 Lithium Polymer Battery from the FJ200 Strobe during travel/storage
to avoid accidental operation which could lead to overheating or permanent damage.
●Do not overtighten the tilter bracket tension knob.
●Ensure the FJ200 is securely mounted before use.
●Only use FJ200 compatible modifiers and accessories and ensure they are securely attached to
the FJ200 Strobe before use.
●Do not attempt to modify any Westcott products. Contact Westcott for assistance.
●The operating temperature range is 14-104°F (-10-40°C).
Dual-Stage Heat Protection System
The FJ200 is equipped with a self-monitoring system ensuring safe operation during continued
full-power use during a short timeframe. The monitoring system provides a staged automatic shutoff
scenario;
●Stage 1: Once the strobe reaches an internal operating temperature of 131°F (55°C) the screen will
display a red [Bulb Icon] and the recycle time will increase to 2 seconds in effort to cool the unit
while allowing for further operation.
●Stage 2: Once the strobe reaches an internal operating temperature of 167°F (75°C) the screen
will display a red [OH] icon and the unit will be inoperable for an estimated 10 minutes until an
adequate internal temperature has been reached to continue operation.
●Once the unit has cooled, the [OH] will disappear from the screen and it will then be safe to
continue operation.
7
FJ200 Strobe: Firmware Updates
The FJ200 strobe is designed with a USB-C port to allow for firmware updates only (no charging). Future
firmware updates could result in performance enhancements, modified menu options and menu layouts.
It is strongly suggested that you visit westcott.com/4740 to confirm your strobe has the latest firmware.
Installing the Firmware
1. Visit westcott.com/4740 and scroll to the Support section. Find and download the latest
firmware ZIP file.
a. NOTE: Various browsers may automatically unzip the ZIP file. In this scenario, skip to Step
#3.
2. Unzip the file and open the extracted folder.
3. IMPORTANT: Read ALL FILES located in the extracted folder (i.e. README, Changelog, etc).
4. Ensure the F200 is OFF and cooled before removing the battery from the strobe.
5. Connect the USB-A to USB-C cable to the FJ200’s USB-C port.
6. Common operating systems will present the strobe as an external drive device.
a. NOTE: MacOS may display the external device on the desktop or in the Finder window.
7. Locate the .BIN file on your computer and drag the file to the F200 (external device).
a. NOTE: The file ending in .BIN will be the ONLY file copied to the FJ200.
8. Once the file has been completely copied to the FJ200, EJECT the FJ200 from the computer.
9. Remove the USB-C cable from the FJ200 and reinsert the battery.
10. Long press the Power | Test button on the FJ200 to initiate the firmware update and confirm
installation was successful by locating the firmware text in the bottom right corner of the screen
during the start-up process.
IMPORTANT
●If FJ devices don’t display as an external device after being connected to the computer, then
please disconnect the USB cable from both devices, restart the computer, and restart the
firmware installation process.
●It’s recommended that the firmware update installation process be completed only when the
connected computer’s power level is ≥ 50%. Loss of power of any type during this process could
render the FJ200 inoperable and require professional repair.
●Removing the USB-C cable from the FJ200 without properly ejecting the FJ200 from your
computer could render the strobe inoperable and require professional repair.
●Depending on the operating system and the applications running, copying the firmware from your
computer to the FJ200 may take a few minutes and/or halt the copying process. Should this
happen, close the copy progress window and try again. Further copying issues may require the
computer to be restarted.
8
FJ200 Strobe: Getting Started
Charging the FJ200 Lithium Polymer Battery
1. Ensure the FJ200 is OFF by long-pressing the Power | Test button until the LCD screen turns off.
2. Remove the battery from the FJ200 by sliding the release towards the rear of the FJ200 while
gently pulling the battery away from the strobe body.
3. Connect the FJ200 Charger Power Cord to the FJ200 Battery Charger and plug the cord into a
wall outlet. Wait until the AC Power LED indicator light turns red and the four battery LED
indicators to turn green before inserting the battery.
4. Align the gold contacts on the bottom of the FJ200 battery with the pins inside the FJ200
charger, insert the battery into the charger and gently press down until the battery locks into
place.
5. The battery is charged and can be safely removed from the charger when all four battery LED
indicators are full and stopped blinking.
6. Remove the battery from the charger by grasping the sides and gently pulling away from the
charger.
Battery Charger LED Indicator Light Colors
●Solid Red & Solid Green Indicator LEDs
○No Battery Inserted: The charger is plugged into a power outlet and ready to charge the
FJ200 Li-po Battery.
○Battery Inserted: The FJ200 Battery is fully-charged and ready to be removed from the
charger.
●Solid Red & Blinking Green Indicator LEDs
○Battery Inserted: The FJ200 Battery is successfully docked and charging.
Reinserting the FJ200 Lithium Polymer Battery
Reinsert the FJ200 Battery into the strobe by aligning the metal contacts on the bottom of the battery to
the pins inside the battery compartment on the FJ200, slide the battery release on the FJ200 toward the
rear of the unit, and gently press the battery into the battery compartment until it clicks into place.
DC Power Operation
1. Ensure the FJ200 battery has been fully charged.
2. Ensure the battery is securely inserted into the FJ200.
3. Turn the strobe ON by pressing and holding the Power | Test button until the start-up screen
appears. Release the Power | Test button.
AC Power Operation
NOTE: AC operation requires the FJ200 AC Adapter (SKU#4749); sold separately.
9
Autres manuels pour FJ200 Strobe
1
Table des matières
Autres manuels Westcott Équipement de test
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
