WePresent SharePod WHE-100 Manuel utilisateur

wePresent

SharePod

User's Manual

Model : WHE-100

Version: 0.5

Table of Contents

1 OVERVIEW .......................................................................................................................................... 3

2 PACKAGE CONTENTS.............................................................................................................................. 4

3 PHYSICAL DETAILS ................................................................................................................................. 4

4 WHAT YOU NEED ................................................................................................................................. 5

5 WEPRESENT SHAREPOD PAIRING.............................................................................................................-5

5.1 AUTO PAIRING ................................................................................................................................ 5

5.2 MANUAL PAIRING............................................................................................................................ 6

6 WEPRESENT SHAREPOD MIRRORING ........................................................................................................ 7

6.1 SHAREPOD MIRRORING.................................................................................................................... 7

6.2 ADVANCED COLLABORATION WITH WEPRESENT..................................................................................... 8

7 WEB ADMIN........................................................................................................................................ 9

7.1 LOGIN ADMIN PAGE......................................................................................................................... 9

7.2 SYSTEM STATUS............................................................................................................................... 9

7.3 DEVICE SETUP .............................................................................................................................. 10

7.4 NETWORK SETUP .......................................................................................................................... 11

7.5 WIFI SETUP ................................................................................................................................. 11

7.6 CHANGE PASSWORDS ..................................................................................................................... 12

7.7 RESET TO DEFAULT......................................................................................................................... 13

7.8 FIRMWARE UPGRADE ..................................................................................................................... 13

7.9 REBOOT SYSTEM ........................................................................................................................... 15

7.10 LOGOUT ...................................................................................................................................... 15

1Overview

wePresent SharePod is a unique pairing solution to wirelessly connect an HDMI source

to a wePresent device, enabling seamless collaboration in meetings and classrooms.

Connecting an HDMI cable to the SharePod allows full mirroring of audio and video

from supported HDMI sources to a display or projector, without any software

installation or other configuration required.

Furthermore, you can utilize the advance features on the wePresent device such as the

4-to-1 projection, Annotation, WebSlides and Conference Control for better meeting

room or classroom collaboration.

Key Features

Wireless audio/video mirroring from HDMI video source. (Up to 1080p 30FPS)

WiFi 802.1a/b/g/n (5G/2.4G WiFi Station Mode)

Auto Pairing through USB.

Support wePresent 4-to-1 quadrant projection.

Support wePresent Conference Control feature.

Support wePresent WebSlides feature.

Support wePresent Annotation feature.

Web Management and Web Firmware Upgrade.

2Package Contents

wePresent SharePod device

Power Adapter (DC +5V, 1.2A)

Setup Guide

Warranty Card

CE DoC

3Physical Details

Description

Play/Stop Button Press button to start/stop mirroring.

HDMI In HDMI source input.

Micro USB USB 2.0 port for device pairing.

Ethernet 10/100M RJ-45 port.

Power Jack Power Jack 5V/1.2A

Reset Button Hardware reset to factory default settings.

4What You Need

wePresent WiPG device

Projector or display with VGA or HDMI interface

HDMI source such as Document Camera, Digital Microscope,

Laptop, or DVD Player.

Micro USB cable, HDMI Cable

5wePresent SharePod pairing

5.1 Auto Pairing

Plug in the micro USB cable from SharePod to the wePresent device, and pairing will

begin automatically. The SharePod LED will show a long flashing red light while pairing

is in process. Please wait until you can see the “Pairing successful” message on the

wePresent start screen, and then remove the USB cable to complete the pairing.

Note:

a. Supports wePresent WiPG-1000, WiPG-1500, and WiPG-2000.

b. Ensure the wePresent device firmware is updated to the latest version.

c. Average pairing time is 20 seconds.

5.2 Manual pairing

Plug in the micro USB cable from SharePod to laptop and launch the configuration tool

from the USB storage, and then begin configuring the pairing information manually as

below.

Receiver

•IP Address: the IP address of target wePresent device

•Login Code: the login code of target wePresent device

WiFi

•Name

：

the WiFi name of target WiFi Access Point device

•Security Type

：

WiFi Security type, such as WEP/WPA-PSK/WPA2-PSK

•Key

：

Security key of target WiFi device

MirrorOp Sender

•Sender Name

：

The name of SharePod device

•Image Quality

：

High / Normal

<Save>

<Cancel>

<Go to Device Admin>: Go to SharePod web admin page.

6wePresent SharePod Mirroring

6.1 SharePod Mirroring

1) After powering on the SharePod, it will then connect to the target wePresent

device. The short blinking blue LED indicates the system is trying to connect to

target wePresent device. It will switch to static blue LED when it is connected.

2) Plug in the HDMI cable to the supported HDMI source, and mirroring will begin

automatically if the wePresent device is in standby mode, or you can press the PLAY

button to manually begin mirroring. The blue LED indicates that the system is ready

for mirroring and it will switch to red LED when mirroring.

Note:

a. Please pair the SharePod with target wePresent device before the connection.

b. Please use the power adaptor to supply the power to SharePod device.

c. Supports HDMI 720p, 1080i/1080p.

d. Does not support HDCP content.

e. If interference causes the SharePod to stop the connection to the wePresent,

please press the button again to resume the connection.

f. LED behavior and troubleshooting:

LED Description Troubleshooting

Blue Ready for Mirroring

Red Mirroring

Short Blinking Blue

(0.5 sec)

Connecting

Pairing with wePresent

device.

Long Blinking Blue

(2 sec)

Waiting for HDMI Check HDMI source.

Short Blinking Red

(0.5 sec)

Error

(Wrong login code or

rejected by Conference

Control)

Pair with wePresent

device again, or disable

the Conference Control.

Long Blinking Red

(2 sec)

Pairing Mode

6.2 Advanced Collaboration with wePresent

1) Conference Control:

Choose the SharePod screen from wePresent Web Conference Control page or OSD

to start the full screen/4-to-1 projection. The meeting host or teacher can

moderate the meeting in an efficient way.

If SharePod is rejected by Conference Control mode while pressing the Play button,

the LED will switch to short blinking red LED to notify the u se r.

2) 4-to-1 projection:

Choose the SharePod screen from wePresent Web Conference Control page or OSD

to start the 4-to-1 projection.

3) WebSlides:

Broadcast and browse the SharePod screen from WebSlides page. This also allows

saving a screenshot locally.

4) Annotation:

Make annotation on SharePod screen from wePresent pen menu (if available) and

save the screenshot to local USB drive.

7Web Admin

7.1 Login Admin Page

1) Connect the SharePod to the same network of your laptop, then open a browser

window to visit the SharePod web admin page.

2) Enter the password to login the admin page. (default password: admin)

7.2 System Status

1) Click on “System Status” option, it will show current system status.

Model Name: Product model name

Versions:

Firmware version no.: Product firmware version number.

Network Status:

IP address

：

IP address of SharePod device.

Subnet Mask

：

subnet mask

Default Gateway

：

default gateway

Wireless MAC address

：

wireless MAC address

Wire MAC address

：

wire MAC address

WiFi Information:

WiFi Station Status

：

Current status or the connected WiFi AP name.

7.3 Device Setup

1) Click on “Device Setup” option, it will show the device setting items.

<Receiver IP Address>: The IP address of target wePresent device.

<Login Code>: The login code of target wePresent device.

<Sender Name>: The name of the connected SharePod

<Image Quality>: Normal / High.

Table des matières

Autres manuels WePresent Adaptateur

WePresent

WePresent WP-820 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur