Wemo F7C063 Manuel utilisateur
Setting up the Wemo® Mini Smart
Plug, F7C063
Body
The Wemo® Mini Smart Plug, F7C063, lets you turn electronic devices ON or OFF
from anywhere using your smartphone or tablet. This home automation device uses
your existing home Wi-Fi to provide wireless control of lamps, heaters, fans and more.
You can even set schedules for your devices and control them remotely using a mobile
internet connection.
Follow the instructions below to learn how to set up your Wemo Mini.
Step 1: Plug your Wemo Mini into a three-pronged grounded outlet.
NOTE: Wait for the Status light to blink orange and white. This
signifies that the Wemo Mini is now ready to be set up. To know more
about the Status light behaviors of your Wemo Mini, click here.
Step 2: Tap the Settings icon on your Android™ or iOS device.
Enable Wi-Fi and connect to your Wemo network. Each Wemo device
has a unique Wemo ID printed at the back of the unit.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
1 of 7 10/30/2017 10:50 PM
QUICK TIP: If you are unable to locate your Wemo Mini on the Wi-Fi
list, you may need to restore your Wemo Mini to factory defaults.
Step 3: Launch the App.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
2 of 7 10/30/2017 10:50 PM
Step 4: The Personalize screen will allow you to modify the name or
image of your Wemo Mini. You can either make the changes at this
point or just tap Next and make the changes later.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
3 of 7 10/30/2017 10:50 PM
Step 5: Enter a valid email address and tap NEXT.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
4 of 7 10/30/2017 10:50 PM
Step 6: Select your home Wi-Fi and enter your password.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
5 of 7 10/30/2017 10:50 PM
Wait while the Wemo App connects to your Wi-Fi. Once this is
done, Remote Access will be enabled by default.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
6 of 7 10/30/2017 10:50 PM
The Wemo Mini is now successfully set up and you can see it on the Wemo App’s
Devices list. To know more about your Wemo Mini, click on the links below:
Meet the Wemo® Mini Smart Plug, F7C063
Understanding the Wemo® Mini Smart Plug, F7C063 Status Lights
Why did I receive an overheat message for my Wemo® Mini Smart Plug, F7C063?
Related Articles:
Meet the Wemo App for Android™
Meet the Wemo App for iOS
Brand Belkin
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/Setting-up-the...
7 of 7 10/30/2017 10:50 PM
How to manually reset the Wemo®
Mini Smart Plug, F7C063 to factory
defaults
Body There are two scenarios where you will need to reset your Wemo® Mini Smart Plug,
F7C063.
Scenario 1: If you see a blinking orange light on your Wemo® Mini Smart Plug,
F7C063, you will need to restore your Wemo Mini by following the steps below:
NOTE: If you changed your Wi-Fi router but you want to save its friendly name and the
Rules applied to it, skip Step 2 below.
Step 1: Press and hold the power button.
Step 2: Unplug your Wemo Mini then plug it back in while holding the
power button down.
Step 3: Continue to hold the power button down until the light blinks
rapidly then release it.
Step 4: If the light alternately blinks orange and white, then it is
ready for setup. Click here for instructions on how to set up your
Wemo Mini.
The reset process will take 30-90 seconds to complete.
Scenario 2: If you are unable to locate your Wemo Mini on your phone’s Wi-Fi list or in
your Wemo App, you can proceed to do the following:
Step 1: Unplug the Wemo Mini from the power outlet.
Step 2: Plug the Wemo Mini back into the power outlet.
Step 3: The light will blink white to signify it is starting up. When the
light turns to a solid white light then it is connected to the network.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall...
1 of 2 10/30/2017 10:51 PM
NOTE: If the light is blinking orange, try restoring your Wemo Mini by
using the instructions found in the Scenario 1 above.
If the light alternately blinks orange and white, then it is ready for setup. Click here for
instructions on how to set up your Wemo Mini.
Brand Belkin
Knowledge Article http://belkin.force.com/Articles/articles/en_US/How_To/How-to-manuall...
2 of 2 10/30/2017 10:51 PM
Understanding the Wemo® Mini
Smart Plug, F7C063 Status Lights
Body
Have you ever looked at your Wemo® Mini Smart Plug, F7C063, noticed a light on it
and wondered what it means? The light you see is the Wemo status light. Depending
upon its behavior you can tell what state your Wemo is in, and use this article to assist
in troubleshooting any issues it is reporting.
First let’s talk about what this light is all about
The Wemo Mini has a single light on the front of it that tells you how it’s doing. This is
an all in one Power and Status light.
So what does this light mean for me?
There are six states that the status light can be in:
Blinking White - When you first plug in the Wemo Mini it will blink white to signify it is
starting up. This should last about 15 seconds.
Solid White - When your Wemo Mini is configured, working properly, and turned on
(power flowing through the front outlet) the status light will be lit solid white.
Blinking Orange - A blinking orange light signifies that your Wemo has network
credentials stored in it (Wi-Fi name and password) but it is unable to connect to your
Wi-Fi. Your Wemo will still follow any rules assigned to it but you will not be able to
control it with the Wemo App.
Solid Orange - A solid orange light is meant to show that your Wemo is still connected
to your Wi-Fi but is receiving a non-optimal signal. Your Wemo will still follow any rules
assigned to it but you could face difficulties when controlling it with your Wemo App.
Knowledge Article http://belkin.force.com/Articles/articles/en_US/FAQ/Understanding-the...
1 of 2 10/30/2017 10:51 PM
Table des matières
Autres manuels Wemo Domotique
