Weintek CMT3000X Series Guide de l'utilisateur

User

Manual

cMT3000X Series Startup Guide

Weintek USA, Inc.

www.WeintekUSA.com

(425) 488-1100

Rev. Sep 3, 2020

Table of Contents

1. Network Wiring Diagram…………………………………………………………………………………………………………… 3

2. Setup……………................................................................................................................................ 4

3. Web Interface....................................................................................................………………………… 16

4. How to Use WebView………………………………………………………………………………………………………………. 23

5. How to Load a Project via USB Drive/SD Card .............................................................................. 25

6. How to Retrieve Historical Data via USB Drive/SD Card................................................................ 26

7. How to Delete All Historical Data.................................................................................................. 27

8. OS Upgrade................................................................................................................................... 28

9. cMT-Viewer.…………………………………………………………………………………………………………………………….. 30

10. Monitor Mode………………………………………………………………………………………………………………………….. 38

11. cMT-Viewer Limitations…………………………………………………………………………………………………………… 42

12. cMT3000X HMI Gestures Operation…………………………………………………………………………………. 44

1. Network Wiring Diagram

Connect a cMT3000X HMI to a router by an Ethernet cable as the diagram shows below.

The default IP address of LAN 1 is DHCP. The default IP address of LAN 2 is static IP 192.168.100.1. The

IP addresses of LAN 1 and LAN 2 must be configured to different subnets, except for certain

cMT3000X HMIs which have been activated with a Codesys license.

cMT3000X LAN ports:

cMT3092X HMI is equipped with two independent Ethernet ports which isolate the device network

from the company/factory network. LAN1 is a WAN (Wide Area Network) port which is allowed to

connect to a public network or another network via a gateway. LAN2 is a LAN (Local Area Network)

port.

2. Setup

Press the system toolbar button in the top left corner to open the setup menu.

Information

This page shows general information about cMT3000X HMI and network information.

General

Adjust the brightness of the screen and audio volume.

Language

Select a language for the system settings menu. The language selected on the project of the

cMT3000X HMI won’t be changed by this setting.

Input Method

Select languages for system keyboard input use.

Advanced Settings

To access more system settings, click on the lock icon in the top left corner. There are two different levels of

password protection. Select [System Setting] and enter System Setting password. The default password of

System Setting is 111111. The Codesys tab, OS Upgrade tab, and Reset Option tab will be accessible to

System Setting.

After clicking on [OK], the icon will become unlocked.

Codesys (If available)

This is a page used to activate Codesys functionality when the HMI supports Codesys. To activate this

feature on a cMT3000X HMI, a Codesys activation card is required and must be purchased separately.

[Codesys Activation Code]- Enter the codes displayed on a Codesys activation card. Click [Active] to activate

Codesys.

Note: Once Codesys is activated, there is no way to remove Codesys from the cMT3000X HMI.

[Restore Codesys License]- The Codesys functionality will be restored if it is enabled. Contact Weintek USA

before using this.

General

[Direction]- Click on the button to change the direction of the screen display.

[Popup download window]- If enabled, after inserting a USB disk or SD card to the slots of the cMT3000X

HMI, the Upload/Download dialog window will pop up.

[FTP Port]- Click the “>”button to change FTP port number.

[FTP client can modify USB/SD data]- If enabled, historical data stored in USB drive/SD card can be modified

via FTP(File Transfer Protocol).

Network

Set the IP addresses of Ethernet 1 and Ethernet 2. The default IP address of Ethernet 1 is DHCP. The default

IP address of Ethernet 2 is 192.168.100.1. The IP addresses of Ethernet 1 and Ethernet 2 must be on

separate subnets, except for cMT3000X HMIs with activated Codesys.

Click on a “>”button. Enable [Obtain an IP address automatically] (DHCP) or set the IP address manually

(Static IP).

Time/Date

Adjust cMT3000X HMI RTC manually.

HMI Name

Change the name of cMT3000X HMI to identify this HMI when retrieving historical data or loading a project

on a PC. This saves time remembering the IP address of each cMT3000X HMI.

Clear History

This page is used to clear historical data, recipe, and database information stored in the internal memory of

a cMT3000X HMI.

Table des matières

Autres manuels weintek Équipement d'enregistrement

weintek

weintek cMT3072X Series Manuel utilisateur

weintek

weintek mTV series Manuel utilisateur

weintek

weintek cMT2108X Series Manuel utilisateur

weintek

weintek cMT-iPC15 Manuel utilisateur

weintek

weintek cMT3072XP Series Manuel utilisateur

weintek

weintek MT8000iE Series Manuel utilisateur

weintek

weintek cMT-SVR-200 series Manuel utilisateur

weintek

weintek cMT-SVRX Series Manuel utilisateur

weintek

weintek cMT-SVR Guide de l'utilisateur

weintek

weintek cMT2078X Series Manuel utilisateur

weintek

weintek cMT3152X Series Manuel utilisateur

weintek

weintek cMT-3103 Manuel utilisateur

weintek

weintek cMT2128X Series Manuel utilisateur

weintek

weintek MT8070iER1 Series Manuel utilisateur

weintek

weintek cMT2158X Series Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien

weintek cMT3000X Series Guide de l'utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques