WEEE G Series Manuel utilisateur

WIFI TRAIL CAMERA

USER MANUAL

Please read this guide carefully before use and keep it well for future reference.

Android/IOS

Camera View ( G SERIES )

1. Strap hole

2. Lock hole

3. Fixing nut

4. DC interface

5. Lens

6. Infrared light

7. PIR indicator

8. WIFI Indicator

9. Microphone

10. PIR & sensor

11. Fixed button

12. PIR & sensor

3. LCD 1

4. 1SHOT button

5. 1Right button

. 16 Up button

. 17 MENU button

8. 1Left button(WiFi: ON/OFF)

19. REPLAY button

Down button20.

21. OK button

22. TF slot

23. USB interface

24. Switch ( ) ON / TEST / OFF

2 . Battery pack5

REPLAY

SHOT

TF USB ON

TEST

OFF

22 23 24

Camera View ( K SERIES )

1. Strap hole

2. Lock hole

3. Fixing nut

4. DC interface

5. Infrared light

6. PIR indicator

7. WIFI Indicator

8. Microphone

9. Lens

10. PIR & sensor

11. Fixed button

12. PIR & sensor

3. LCD 1

4. 1SHOT button

5. 1Right button

. 16 Up button

. 17 MENU button

8. 1Left button(WiFi: ON/OFF)

19. REPLAY button

Down button20.

21. OK button

22. TF slot

23. USB interface

24. Switch ( ) ON / TEST / OFF

2 . Battery pack5

REPLAY

SHOT

TF USB ON

TEST

OFF

22 23 24

Preparation before use

Manually shooting or recording under "TEST" mode

● Slide the switch to “TEST” position (The screen is on).

● Press Key ▲ or ▼ Key to quickly shift between photographing an videoing.

● Press Key “SHOT” to record or take a picture.

Mode

TES T

OFF

Description

1. Monitoring mode.

1. Setup.

2. Manual shooting of photos or videos.

3. Check and replay.

1.Switch oﬀ camera.

Camera

Image

Video

time

00:00:00

720

Card

00/00/00 00:00:00

Video Mode

Date Time

3.5mm

1.35mm

DC MATE PLUG

Camera

Image

16M

Picture

Quantity

9999

Card

Photo

size

Video

resolution

Photo Mode

Note: In the "TES T" mode, if you do not operate for a long time, the

camera will enter the power saving mode and the screen will shut down.

The screen can be turned on by pressing any button on the camera.

1.Power selection

1.1 Insert 8×1.5V AA battery into the battery

compartment.

1.2 When using the power adapter (optional)：At the

bottom of the camera,there is external power supply

port,which support DC12V 2A power,power plug size is

3.5X1.35mm.

2.Insert a micro SD storage card (Class 10 TF card,

FAT/FAT32）

Notes:

①.Be sure the camera is powered OFF before inserting

or removing SD cards or batteries

②.Please format the memory card before the ﬁrst use.

3.Switch Function Introduction:

Adapter

REPLAY

SHOT

File operation in TF card

Menu Overview（Default parameters）

Follow steps below to preview photos or videos in your camera:

Step1: Slide the switch to “TEST” position (The screen is on).

Step2: Press “REPLAY” Key to enter the picture or video interface.

Step3: Press ◄ Keyand ► Key to select the photo or video to preview.

Step4: When playing a video, press the “OK” button to play or pause, press the

“MENU” button to exit the video playback.

Step5: Press “REPLAY” Key to exit.

Step1: Slide the switch to “TEST” position (The screen

is on);

Step2: Press "REPLAY" to enter TF card browsing →

Press the "MENU" key → Press "OK" to enter the delete

option → Press "OK" to conﬁrm the settings, press

"MENU" to exit settings.

【Delete current ﬁle】to delete current ﬁle

【Delete all ﬁles】to delete all ﬁles

【Activate slide show】to slide show the ﬁles

【Write protect】to lock the ﬁles so that you can’t delete

them.The protected ﬁle has an icon“ ”.

Step3: Press “REPLAY” key to exit.

Browse photos/video

Back

Select

Settings

Delete current ﬁle

Delete all ﬁles

Activate slide show

Write protect

Mode

PI R Level

PIR Interval

Capture Num

Video Length

ME NU Settings

Photo / Video / Photo+video

Middle / Low / High

1 / 2 / 3 (Continuous photo taking）

640x480P / 1280x720P / ...

Code

Audio Recording

Video Size

Language

English, Deutsch, Francais,

Italiano,日本語...

ME NU Settings

Code

The time interval between each trigger shooting

Set Clock YY/MM/DD 00:00

Stamp

Photo Size

14 Time Lapse Normal / TL video / Oﬀ

15 Timer Setting Start: 00:00 / Stop: 00:00

17 Camera Name

18 Security Code

Auto W IFI oﬀ

Wiﬁ S SID

21 Wiﬁ Password

Default

1 Min / 3 Min / 5 Min

12345678 (Initial)

Software

Format NO /Yes (Format TF card)

3 seconds - 10 minutes

Time & date / Date / Oﬀ

5M/ 8M/ 12M/ 16M/ 20M/ 24M/ ...

ON/OF F

TJ48K1W (Initial)

NO /Yes

Fileware version number

Auto / Near / Middle / Far

7IR distance

16 Loop Record ON/OF F

ON/OF F

Setting of "TimeLapse"

Setting of "TimeSetting"

USB cable connection computer precautions

Step1: Slide the switch to“TEST”position (The screen

is on)；

Step2: Press“Menu”key to enter the setting interface；

Step3: Press ▲, ▼ to scroll through the setting options,

and the “OK” button to conﬁrm the setting；

Step4: Press “MENU” key to exit.

You can browse, copy, and delete the images and videos on your computer

by connecting the camera to your computer with an USB cable. When using

the USB connection, make sure that the switch is on TEST mode.

Back

Select

Time Lapse

Normal

TL video

Oﬀ

If you enable this function, the PIR Sensor of the

camera will be deactivated.

* Normal : According to the "Mode" setting, the

camera will take photos / videos / photo + video in

the time interval you set.

* TL vidwo : The camera will take photos at the time

interval you set. These photos will be formed to a

video.

You can enable it to set a working period for the

camera.It will enter the standby mode if the time is not

within the period.

* If the start time is earlier than the current time, the

setting will take eﬀect the next day.

* If the start time is later than the current time, the setting

will take eﬀect on the same day.

Back

Select

Timer Setting

Hr : Min

Start : 00 00

Stop : 00 00

1.The memory card cannot be formatted via USB when connected to the

computer.

2.Before connecting USB, please input the password if the camera is

setting.

Back

Select

Settings

Mode

PI R Interval

PI R Level

Capture Num

Video Length

APP Installation

Before using the WIFI function, please install the A PP on the

smartphone device.

1.For Android smart phone, please go to Google Play

and search "Venari" to download and install it. For

IOS smart phone, please go to Apple Store and

search "Venari" to download and install it.

2. You can scan the below QR code to get the APP

“V ENA RI”. Android/IOS

WiFi Connection

1. Please turn on the camera, you can set the camera in TEST/ON

mode.

2.Before using the “VENA R I” APP, please make sure the phone's

Bluetooth and WiFi functions are turned on.

WIFI APP connection

Step 1: Turn on VENARI app,click “Connect device WIFI”

Note: During the connection process, VE NAR I may need to access

your location, pictures and other ﬁles. Please all select “ALLOW” or

“O K.”

Step 2: Select the corresponding Bluetooth name.(Hownic)

Step 3: Select “Auto Connect”, the APP will start automatically

connecting to

the cameraʼs WIFI hotspot soon.

Step 4: Waiting for 60s, the APP will connect the WIFI automatically.

Step 5: When connecting the W I FI function again, you can quickly

connect to the corresponding camera in "Device List”.

In the upper right corner of the “VENARI” APP, there is a “User

Guide”, There has full detailed steps about W IFI connection.For

better use of WI F I function, please see the “User Guide”.

Note:

1.When the WIFI is waiting for connection, WI FI status indicator will

ﬂash frequently.

2.When the WIFI connected, the W IFI status indicator will ﬂash once

every second.

Bluetooth list

Hownic 56:65:33:34:84

Cancel

TheAPPwill start connecting to the

camera’s WiFI hotspot soon

Auto Commect

Auto Connect:If you have not modiﬁed the

WiFi name (SSID) and password of the

camera,please select Auto Connect-the app

will use the default WiFi name (SSID) and

password of the camera to connect with the

camera.

Manual Connection

Connect manually:If the camera’s WiFi name

( S S I D ) a n d p a s s wo r d h av e b e e n

c h a n g e d , p l e a s e s e l e c t C o n n e c t

manually.Please select the camera’s WiFi name

(SSID) manually in the WLAN list in the system

settings and connect with the corresponding

password (the camera’s WiFi will take about 30

seconds to turn on, please be patient),and then

return to VENARI after successful connection.

Cancel

Waking up the camera

The camera is opening a WiFi

hotspot

Waking for the phone to join

CANCEL

VENARI

Connect device WiFi

No device connected

User Guide

Device List

TJ48K1W.123T Connect

Inactive

Add Camera

APP Operation

After successful connection, you can watch live video in the APP

choose to take photos/ record videos, change setup and download the

ﬁles to your phone, and manage the ﬁles in the APP menu.

Battery power

Photo interface

Video interface

Exit function

Shoot manually

Menu Settings

Delete

File browsing

Travel Path

YES

120°

130°

90°

30°

Example:Mounting 120° total PIR angle

Setup the camera outdoor

Once all the setting has been done,the camera is ready for ﬁeld

use:

● Mount the camera about 0.5-2m high with the camera pointed at

a slight downward angle.

● Keep the camera facing north or south NOT east or west due to

sunrise and sunset could produce false triggers and overexposed

images.

●Clear all obstructions in front of camera to avoid obscuring

camera lens or P IR sensor.Otherwise,the camera may be

triggered by mistake during windy or hot days.

● In order to avoid false triggers,you should adjust PIR sensitivity

depend on the object or wild animals;size,the speed and distance

of the movement.

● Installation of the Class 10 TF( microSD) card with FAT/FAT32

before setting up the camera.

● In order to avoid false triggers,you should adjust PIR sensitivity

depend on the object or wild animals;size,the speed and distance

of the movement.

● Installation of the Class 10 TF( microSD) card with FAT/FAT32

before setting up the camera.

● Make sure that time and date is correct.

● Make sure that the camera’s mode switch is “ON” mode(before

you leave).

FAQ

● Question: Are rechargeable batteries allowed?

Answer: No，because, rechargeable batteries are normally 1.2V, but

the camera needs at least a batter y pack of 8*1.5V batteries.

● Question: Why we sometimes shoot blank photos with no moving

targets in it?

Answer: The PIR sensor is very sensitive so that it will be triggered by

some environmental factors such as a piece of falling leaf when the

setting is at high level, so it is strongly recommended that the setting

should be made at the medium level.

● Question: Why some photos taken at night are very dark, which

seems that the IR L EDS were not working?

Answer: The I R LEDS have a high power consumption and will

become malfunctioning when the power of battery pack goes down.

This problem can be solved by replacing the batteries.

● Question: Why only photos are produced when the setting is for

both photos and videos?

Answer: There is a heavy power consumption when the video function

is started and the camera will only shoot photos with no videos if the

power of battery pack goes down. Please change batteries to ensure

normal working of the camera.

● Question: What shall we do if some menus are not selectable -

When the "TimeLapse" function is turned on, the "Video" and

"Photo+video" functions are not selectable.

Answer: Please turn oﬀ the "TimeLapse" function.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WEEE Caméra de repérage

WEEE

WEEE L Series Manuel utilisateur

Manuels Caméra de repérage populaires d'autres marques

Nestbox

Nestbox C13 Manuel utilisateur

Wildview

Wildview STC-TGL1 Manuel utilisateur

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuel utilisateur

Suntek

Suntek HC-800M Manuel utilisateur

Spypoint

Spypoint G4 Manuel utilisateur

Duramaxx

Duramaxx 10029765 Manuel utilisateur

Brecom

Brecom C2400 Manuel utilisateur

BlazeVideo

BlazeVideo A280W Manuel utilisateur

Bestok

Bestok 5210GM Manuel utilisateur

GardePro

GardePro X60P Manuel utilisateur

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuel utilisateur

PNI

PNI HUNTING 280C Manuel utilisateur

Muddy

Muddy Pro-Cam 14 Manuel utilisateur

Bresser

Bresser 3310006 Manuel utilisateur

Recon Outdoors

Recon Outdoors HS410 Manuel utilisateur

Braun

Braun 57660 Manuel utilisateur

Wildgame

Wildgame Shadow Manuel utilisateur

Spypoint

Spypoint FLEX Manuel utilisateur