\\Table of contents
Edge 580 - Edge 550
INSTALLATION .............................1
Unpacking the machine 1.11
Removing external clamps 1.13
Removing the motor clamping screws
Removing the shipping rails 1.15
Handling the covers 1.17
Removing the covers
Replacing the covers
Removing the internal clamps 1.19
Removing the set screws
Preparing the bench 1.21
Machine dimensions
Floor space and drilling required
Water connections 1.23
Specifications
Pipe connections
Electrical connections 1.27
Specifications
Edger wiring
Starting the edger 1.29
SAFETY PRECAUTIONS.................2
Safety 2.33
Operator
Machine
Useful hints 2.35
UTILIZATION................................3
Presentation 3.39
Presentation of the machine
Presentation of the application screen
General principles of use 3.45
Usual procedure
Calling up a job
Starting / Interrupting an edging cycle
Normal edging cycle sequence
Important notes
When job data are received
During edging of the second lens
Application screen icons 3.51
General
Lens materials
Types of lenses
Finishings
Sub-finishings and associated parameters
Bevel, Mini bevel, Facetting/Chamfering (according to
machine)
Groove
Drilling
Safety-bevels
Polishing
Lens edging
Normal use 3.67
Producing a job with bevel finishing
Producing a job with rimless finishing
Producing a job with groove finishing
Producing a job with drilling finishing
Producing a job with grooving and drilling finishing
Drilling : facts worth knowing
Special cases 3.79
Retouching a lens
Applying an oversize to the lens
Edging the left lens with different parameters from
those of the right lens
Edging several lenses identically
Checking a finishing before the lens is edged
Principle
Presentation
Visualise a finishing
Place a finishing manually
Produce a manual bevel
Produce a manual groove
Feel the lens again
Operating range 3.97
Points to remember
Illustration of finishing limits
Rimless Finishing
Bevel Finishing
Facette Finishing
Inclined groove finishing
Drilling
Conditions
Limits of hole positioning
Limits related to the thickness of the lens
CONFIGURATION....................... 4
Presentation of configuration menus 4.105
Presentation of the configuration menus access screen
Presentation of the personalisation menus access
screen
Configuration of finishing default
parameters 4.107
Presentation
Standard procedure
Saving of the new setting
Limits
Personalisation of pull-down menus 4.111
Presentation
Standard procedure
Saving of the new personalisation
Comments
Button To be defined
Retouch / Oversizing menu
Adjustment of the setting values 4.115
Preliminary remarks
Procedure
Configuration of general operating
parameters 4.117
Presentation
Configuration of the functions
Selecting a dialog language
Selecting novice or expert operating mode
Activating retouch verification
Activating size compensation according to temperature
Activating size compensation according to wheel loading
Activating size compensation according to the bowing/flat-
tening of the frame
Entering a delay before switching to screen stand-by mode
Save the new setting
