4. ICE MAKING: Ice making
When this light is always on, it means that the ice maker is making ice.
5. CLEAN: Plug in the power supply, the “ICE MAKING” indicator flashes. Pressing the CLEAN button, start the
cleaning function. Cleaning duration is 150 seconds. Do not disconnect the power supply during cleaning. After
cleaning, the product will automatically enter the standby mode.
OPERATION INSTRUCTIONS
Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed the MAX position. If the water
exceeds the maximum scale MAX, you need to open the bottom drain plug, release the excess water, and cover with
a transparent cover.
Step 2
Plug in the power and press the ON/OFF button to start the machine.
1. When the indoor temperature is lower than 15 degrees, please choose small ice. When the indoor temperature is
higher than 30 degrees, it is recommended to choose big ice.
2. The three cycles used for the first time, the ice produced is small and irregular.
3. When the ice basket is full, please take out the ice immediately, do not let the ice overflow the ice basket.
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water box, ice
shovel and evaporator frequently. When cleaning,
unplug the unit and remove the ice cubes. Use a diluted
solution of water and vinegar to clean the inside and the
outside surface of the Ice maker. Do not spray Ice
maker with chemicals or diluted agents such as acids,
gasoline or oil. Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or
in the built-in structure, clear of obstruction. Do not use
mechanical devices or other means to accelerate the
defrosting process, other than those recommended by
the manufacturer.
3. Reuse the machine after being idled for a period of
time, it may not have enough water to pump for air
retard, in this case, the water shortage indicator "ADD
WATER" will be on. Repress POWER button to restart
