WBOX Technologies 0E-HDD1MP28 Manuel utilisateur
High-Resolution IR Camera
User Manual
If you have any questions, please call
W Box Tech Support 1-833-574-9124
for assistance.
E-mail：tech@wboxsupport.com
0E-HDD1MP28(G）
0E-HDB1MP36(G)
0E-HDD2MP28(G)
0E-HDB2MP36(G)
0E-HDDMO2812
0E-HDBMO2812
0E-HDBM2812G
0E-HDDM2812G
High-Resolution IR Camera
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Issue V1.0 (2018-03-20)
i
Precautions
Precautions
Fully understand this document before using this device, and strictly observe rules in
this document when using this device. If you install this device in public places,
provide the tip "You have entered the area of electronic surveillance" in an eye-
catching place. Failure to correctly use electrical products may cause fire and severe
injuries. To prevent accidents, carefully read the following context:
Symbols
This document may contain the following symbols whose meanings are described
accordingly.
Symbol
Description
It alerts you to fatal dangers which, if not avoided, may
cause deaths or severe injuries.
It alerts you to moderate dangers which, if not avoided,
may cause minor or moderate injuries.
It alerts you to risks. Neglect of these risks may cause
device damage, data loss, device performance
deterioration, or unpredictable results.
It provides a tip that may help you resolve problems or
save time.
It provides additional information.
To prevent electric shocks or other dangers, keep power plugs dry and clean.
⚫Strictly observe installation requirements when installing the device. The
manufacturer shall not be held responsible for device damage caused by users' non-
conformance to these requirements.
Error! Use the Home tab to apply 标题 1
to the text that you want to appear here.
High-Resolution IR Camera
User Manual
ii
Issue V1.0 (2018-03-20)
⚫Strictly conform to local electrical safety standards and use power adapters that are
marked with the LPS standard when installing and using this device. Otherwise,
this device may be damaged.
⚫Use accessories delivered with this device. The voltage must meet input voltage
requirements for this device.
⚫If this device is installed in places with unsteady voltage, ground this device to
discharge high energy such as electrical surges in order to prevent the power supply
from burning out.
⚫When this device is in use, ensure that no water or any liquid flows into the device.
If water or liquid unexpectedly flows into the device, immediately power off the
device and disconnect all cables (such as power cables and network cables) from
this device.
⚫Do not focus strong light (such as lighted bulbs or sunlight) on this device.
Otherwise, the service life of the image sensor may be shortened.
⚫If this device is installed in places where thunder and lightning frequently occur,
ground the device nearby to discharge high energy such as thunder strikes in order
to prevent device damage.
⚫Avoid heavy loads, intensive shakes, and soaking to prevent damages during
transportation and storage. The warranty does not cover any device damage that is
caused during secondary packaging and transportation after the original packaging
is taken apart.
⚫Protect this device from fall-down and intensive strikes, keep the device away from
magnetic field interference, and do not install the device in places with shaking
surfaces or under shocks.
⚫Clean the device with a soft dry cloth. For stubborn dirt, dip the cloth into slight
neutral cleanser, gently wipe the dirt with the cloth, and then dry the device.
⚫Do not jam the ventilation opening. Follow the installation instructions provided in
this document when installing the device.
⚫Keep the device away from heat sources such as radiators, electric heaters, or other
heat equipment.
⚫Keep the device away from moist, dusty, extremely hot or cold places, or places
with strong electric radiation.
⚫If the device is installed outdoors, take insect- and moisture-proof measures to
avoid circuit board corrosion that can affect monitoring.
⚫Remove the power plug if the device is idle for a long time.
⚫Before unpacking, check whether the fragile sticker is damaged. If the fragile
sticker is damaged, contact customer services or sales personnel. The manufacturer
shall not be held responsible for any artificial damage of the fragile sticker.
High-Resolution IR Camera
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Issue V1.0 (2018-03-20)
iii
Special Announcement
All complete products sold by the manufacturer are delivered along with nameplates,
operation instructions, and accessories after strict inspection. The manufacturer shall
not be held responsible for counterfeit products.
This manual may contain misprints, technology information that is not accurate enough,
or product function and operation description that is slightly inconsistent with the
actual product. The manufacturer will update this manual according to product function
enhancement or changes and regularly update the software and hardware described in
this manual. Update information will be added to new versions of this manual without
prior notice.
This manual is only for reference and does not ensure that the information is totally
consistent with the actual product. For consistency, see the actual product.
Error! Use the Home tab to apply 标题 1
to the text that you want to appear here.
High-Resolution IR Camera
User Manual
iv
Issue V1.0 (2018-03-20)
Contents
1 Hardware Connection...............................................................................................5
2 Eyeball Camera ..........................................................................................................6
2.1 Dimensions.......................................................................................................................6
2.2 Device Installation............................................................................................................7
3 Bullet camera............................................................................................................10
3.1 Dimensions .....................................................................................................................10
3.2 Device Installation..........................................................................................................11
4 Technical Specifications ........................................................................................14
High-Resolution IR Camera
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Issue V1.0 (2018-03-20)
5
1 Hardware Connection
Figure 1-1 shows the power and video cables.
Power and video cables
Connect the BNC connector of the power or video cable to a video signal cable and
connect the other connector to a low-voltage power cable (12V DC). After installing
the camera, directly connect the video cable and power cable.
The BNC video output interface is used to emit composite video signals. Monitors with a
resolution of higher than 800 TVL are recommended.
Error! Use the Home tab to apply 标题 1
to the text that you want to appear here.
High-Resolution IR Camera
User Manual
6
Issue V1.0 (2018-03-20)
2 Eyeball Camera
2.1 Dimensions
Figure 2-1 shows the camera dimensions of 0E-HDD1MP28(G) and 0E-
HDD2MP28(G).
Dimensions of 0E-HDD1MP28(G) and 0E-HDD2MP28(G) (unit: mm)
Figure 2-2 shows the camera dimensions of 0E-HDDMO2812 and 0E-HDDM2812G.
Dimensions of 0E-HDDMO2812 and 0E-HDDM2812G (unit: mm)
High-Resolution IR Camera
User Manual
Error! Use the Home tab to apply
标题 1 to the text that you want to
appear here.
Issue V1.0 (2018-03-20)
7
2.2 Device Installation
Step 1 Open a package, take out the camera, unscrew the camera compression ring, and
disassemble the camera, the camera components is shown in Figure 2-3.
Camera components
Step 2 Use the base as drill template, drill holes on the ceiling or wall, and reserve the cable
entries of the video/power cables.
Figure 2-4 and Figure 2-5 shows the dimensions of the camera mounting base.
Dimensions of the 0E-HDD1MP28(G) and 0E-HDD2MP28(G) mounting
base
Error! Use the Home tab to apply 标题 1
to the text that you want to appear here.
High-Resolution IR Camera
User Manual
8
Issue V1.0 (2018-03-20)
Dimensions of the 0E-HDDMO2812 and 0E-HDDM2812G mounting base
Step 3 Nail swell plastic buttons in to drilled holes, and fix the camera mounting base to the
ceiling (or wall) by use of self-tapping screws.
Step 4 Install the compression ring, the dome shell, and the dome shell fixed base on the
camera mounting base.
Figure 2-6 shows camera installation.
Camera installation
Step 5 Turn the main body, adjust the lens direction, and note the position of the dome cover
window.
Ce manuel convient aux modèles suivants
11
Table des matières
Autres manuels WBOX Technologies Caméra IP
