Wavetronix Click 100 Manuel utilisateur
Click 100–400 Series
USER GUIDE
Click 100–400 Series
USER GUIDE
www.wavetronix.com 78 East 1700 South Provo, Utah 84606 801.734.7200
© 2014 Wavetronix LLC. All Rights Reserved.
Wavetronix, SmartSensor, Click, Command, and all associated product names and logos are trademarks of Wavetronix LLC. All other
products or brand names as they appear are trademarks or registered trademarks of their respective holders.
Protected by US Patent Nos. 6,556,916; 6,693,557; 7,426,450; 7,427,930; 7,573,400; 7,889,097; 7,889,098; 7,924,170; 7,991,542;
8,248,272; 8,665,113; Canadian Patent Nos. 2461411; 2434756; 2512689; and European Patent Nos. 1435036; 1438702; 1611458. Other
US and international patents pending.
e Company shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the
information contained therein, even if the Company has been advised of the possibility of such damages.
is document is intended for informational and instructional purposes only. e Company reserves the right to make changes in the
specications and other information contained in this document without prior notication.
FCC Part 15 Compliance: e Wavetronix SmartSensor sensors comply with Part 15 of the Federal Communications Commission
(FCC) rules which state that operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesirable operation. FCC compli-
ance statements for applicable optional modules are to be found in the module specications. Unauthorized changes or modications
not expressly approved by the party responsible for compliance with the FCC rules could void the user’s authority to operate this
equipment.
Disclaimer: e advertised detection accuracy of the Wavetronix SmartSensor sensors is based on both external and internal testing,
as outlined in each product’s specication document. Although our sensors are very accurate by industry standards, like all other sen-
sor manufacturers we cannot guarantee perfection or assure that no errors will ever occur in any particular applications of our tech-
nology. erefore, beyond the express Limited Warranty that accompanies each sensor sold by the company, we oer no additional
representations, warranties, guarantees or remedies to our customers. It is recommended that purchasers and integrators evaluate the
accuracy of each sensor to determine the acceptable margin of error for each application within their particular system(s).
WX-500-0055
04/2012
Contents
Introduction 7
Using this Manual 7
Part I Introduction to the Click Series
Chapter 1 The Power Plant 11
Connecting to a Circuit Breaker 12 • Connecting AC Surge
Protection 12 • Connecting Power 13 • Wiring AC Power into
the Click 201/202/204 14
Chapter 2 T-bus Basics 17
Adding a T-bus to the DIN Rail 18 • Mounting Click Devices
18 • Wiring T-buses 18
Chapter 3 Wiring the Devices 21
Working with Screw Terminal Blocks 21 • RS-485 Communi-
cation 22 • RS-232 Communication 24
Chapter 4 Installing Click Supervisor 27
Installing Click Supervisor 28 • Microso .NET Framework 31
Chapter 5 Using Click Supervisor 33
Connecting to Your Computer 33 • Accessing the Communi-
cation Screen 34 • Serial Communication 35 • IP Communica-
tion 37 • Working with Modules 38
Part II Individual Click 100–400 Series Modules
Chapter 6 Click 100 — 16 Output Contact Closure 43
Physical Features 44 • Troubleshooting 48
Chapter 7 Click 101 — Multi-sensor to Contact Closure 49
Physical Features 51 • Installation 54 • On-device Congura-
tion 54 • Computer Conguration 55
Chapter 8 Click 104 — 4-channel DIN Rail Contact Closure 61
Physical Features 62 • Installation 64 • Conguration 65 •
Rotary Switch 66 • Front Panel Menu 67 • Click Supervisor 73
Chapter 9 Click 110 — 4-channel Contact Closure Eurocard 79
Physical Features 80 • Installation and Wiring 82 • Fail-safe
Mode 85 • Conguration 85 • DIP Switches 86 • Front Panel
Menu 92 • Click Supervisor 101
Chapter 10 Click 112/114 — Detector Rack Cards 107
Physical Features 108 • Installation and Wiring 109 • Congu-
ration 111 • DIP Switches 112 • Front Panel Menu 115
Chapter 11 Click 120/121 — Relay 129
Physical Features 130 • Installation 130
Chapter 12 Click 172/174 — Contact Closure Rack Cards 133
Physical Features 134 • Installing and Wiring the Click
172/174 136 • Operation Modes 136 • Power and Congu-
ration 139 • Verify Operation 141 • Fail-safe Mode 142 •
Troubleshooting 143
Chapter 13 Click 200 — Lightning Surge Protector 145
Physical Features 146 • Installation 147
Chapter 14 Click 201/202/204 — AC to DC Power Supply 151
Physical Features 152 • Installation 152
Chapter 15 Click 203 — UPS/Battery 155
Physical Features 156 • Installation 157 • On-device Congu-
ration 158
Chapter 16 Click 210 — AC Circuit Breaker 161
Physical Features 162 • Installation 162
Chapter 17 Click 211 — AC Outlet 163
Physical Features 164 • Installation 164
Chapter 18 Click 221 — DC Surge Protector 167
Physical Features 168 • Installation 168
Chapter 19 Click 222 — System Surge Protector 169
Physical Features 170 • Installation 171
Chapter 20 Click 223 — Dual-485 Surge Protector 175
Physical Features 176 • Installation 177
Chapter 21 Click 230 — AC Surge Protector 179
Physical Features 180 • Installation 180
Chapter 22 Click 250 — Wireless Surge Protector 183
Physical Features 184 • Installation 184
Chapter 23 Click 301 — Serial to Ethernet Converter 187
Physical Features 188 • On-device Conguration 189
Chapter 24 Click 304 — RS-232 to RS-485 Converter 207
Physical Features 208 • On-device Conguration 209 • Com-
puter Conguration 210
Chapter 25 Click 330/331 — Unmanaged Switches 219
Physical Features 220 • Installation 221 • Switching Character-
istics 222
Chapter 26 Click 340/341/342 — Managed Switches 225
Physical Features 226 • Installation 228
Chapter 27 Click 400 — 900 MHz Radio 229
Physical Features 230 • On-device Conguration 231 • Com-
puter Conguration 233
Chapter 28 Click 421 — Serial to Bluetooth® Radio 245
Physical Features 246 • On-device Conguration 247 • Com-
puter Conguration 249
In the introduction
Using this Manual
Wavetronix Click products are a simple and cost-eective way to connect various trac
components into a single, unied system. With a broad range of easy-to-use products, the
Click line integrates quickly and operates in even the harshest conditions. Click devices
provide the power and communication solutions needed for eective trac control and
management.
e Click series is divided into ve smaller, numerically based series. Each device in a par-
ticular series shares common elements, functions, etc.:
Click 100 series – Contact closure devices
Click 200 series – Power and surge protection devices
Click 300 series – Wired communication devices
Click 400 series – Wireless communication devices
Click 500 series – Customizable devices built on our Click 500 platform
is user guide covers the Click 100–400 series. For the Click 500 series, please see the Click
500 Series User Guide.
Using this Manual
is manual is divided into two parts:
Part I: Introduction to the Click Series – is part contains information common to
the Click line, beginning with basic module installation guidelines. It then covers the
Introduction
8 INTRODUCTION CLICK 100–400 SERIES USER GUIDE
Click Supervisor soware, which is used with certain Click devices for conguration.
For a list of Click 100–400 series devices that use Click Supervisor, see the beginning
of Chapter 4.
A few Click devices dier from what is written in the common information chapters
in the way they are installed or the soware used to congure them. In the event that a
Click device departs from what is written in Part I, that dierence will be noted in that
device’s chapter in Part II.
Part II: Individual Click 100–400 Series Modules – is part contains a chapter for
every device (or set of devices, in some cases) in the Click 100–400 series. Each chap-
ter has an introduction to the device along with a description of the device’s physical
features and, when pertinent, sections on installation, conguration, troubleshooting
and more.
Part I
Introduction to the Click Series
Chapter 1 – The Power Plant
Chapter 2 – T-bus Basics
Chapter 3 – Wiring the Devices
Chapter 4 – Installing Click Supervisor
Chapter 5 – Using Click Supervisor
Autres manuels pour Click 100
1
Ce manuel convient aux modèles suivants
31
Table des matières
Autres manuels Wavetronix Électricité industrielle
Manuels Électricité industrielle populaires d'autres marques
Murata
Murata GJM0335C1E4R4BB01 Series Manuel utilisateur
Stahl
Stahl 8575/12 Manuel utilisateur
SI
SI Pegasus Manuel utilisateur
Murata
Murata GRM1555C1H2R7CA01 Seies Manuel utilisateur
Murata
Murata GRM0225C1E6R4BA03 Series Manuel utilisateur
Cooper Power Systems
Cooper Power Systems VXE15 Manuel utilisateur
S&C
S&C Vista SD Manuel utilisateur
Murata
Murata GRM0335C2A7R3CA01 Series Manuel utilisateur
Siemens
Siemens 3VA9988-0BM10 Manuel utilisateur
Siemens
Siemens SITRANS LVS100 Manuel utilisateur
Murata
Murata GRM32ER60G227ME05 Series Manuel utilisateur
Siemens
Siemens SENTRON SUPERSWITCH 3KL82 Series Manuel utilisateur