Introduction
This 4K@60Hz 10G AV over IP Control system is a powerful and flexible solution for controlling multiple SDVoE (Software
Defined Video over Ethernet) based extenders within same network. The user only needs to install this unit into the same local
network as the extenders (transmitters and receivers) to easily define and configure channel routing selections (including video,
audio, and a variety of control interface types) using the WebGUI. Without the use of centralized control unit, each transmitter
and receiver pair would only be ableto function in a point-to-point capacity.
Additionally, this unit supports controlling and configuring the matrix, video wall, and multiviewer modes of connected
SDVoE units. The settings of all connected transmitter/receiver units, including IP configuration, compatibilitysettings, and
extender status are clearly displayed within the WebGUI. A trigger input interface is also provided to allow the easy addition
of a remotecontrol keypad, or other trigger-supporting products Standard control is available via WebGUI (remote or local),
RS-232, Telnet and IR Remote. This interface can allow the user to activate stored macros with the simple press of a button.
Key Feature
⚫Highly scalable modular 10GbE AV distribution system for IP Networks utilizing the SDVoE technology standard.
⚫Supports 4K UHD and DCI resolutions up to 60fps RGB or YUV 4:4:4.
⚫Supports Dolby Vision, HDR10 and HLG HDR formats and ITU-R BT.2020 and BT.2100 color spaces.
⚫Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos™and DTS:X
⚫802.3at PoE+ compliant
⚫USB2.0 HUB ports for extension and routing the USB devices.
⚫Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered.
⚫Basic configuration via front panel buttons with an On-Screen Display (OSD)
⚫Genlock mode for zero end-to-end latency.
⚫Supports seamless AV source switching.
⚫Video wall processing including display bezel compensation.
⚫Multiview processing including display bezel compensation.
⚫Balanced analog audio port can be configured as an input or output for a discrete audio stream or HDMI de-embedding.
⚫Bidirectional IP to Infrared / RS-232 functionality via the API or 3rd-party drivers.
⚫Auxiliary 1GbE channel for network connectivity of attached source devices.
⚫Powerful matrix functionality includes routing control of all audio、video、RS-232 and IR signals.
⚫Support WebGUI control without installing any software.
⚫Can drag-and-drop at WebGUI via smart Devices or touch panel. .
⚫The Dual LAN ports of WST-PIP003enable control over VoIP installations that reside on a logically or physically separate network from the
standard local network.
⚫WST-PIP003 with live video previews of the media sources making it easy to route video to any display or video wall or multiview at the
flick of a finger.
