WatchOvers Assure Manuel utilisateur
1
WatchOvers Assure GPS Mobile Watch Phone
For GSM 2G Network
USER’S MANUAL
WatchOvers.com
2"
"
"
3"
"
Please read this user’s manual carefully before use
Thank you for purchasing the Assure Mobile Watch-Phone with GPS Location from
WatchOvers Limited. For best use of the Assure watch, please read the following
instructions carefully before starting, and operate the watch accordingly. Screens may
vary for Android and iOS and as new App versions are released.
Features
Two Way Voice Communication – Call the watch or the watch can call you.
SOS Emergency Alarm – One button press to call your contacts list and
simultaneously send SOS alert messages automatically through the App to your
contacts who have added the watch to the app.
GPS Location -Real-time tracking – See the watch location on your smartphone in
real time. With the location updated every 60 seconds.
Route Recording & Playback – Playback the location history of the watch today,
last week or last month.
Geo-Zones – create virtual outdoor boundaries and receive boundary breach
alerts. Location is updated every 60 seconds for enhanced Geo-Zone accuracy.
Listen Safety Monitoring – Listen in silent mode in the event of an accident.
Motion Monitor - The Motion Monitor lets you check that the wearer is active or
moving, helpful when caring for an elderly person or someone living alone.
Caller Approval – You control who can call the watch and who the watch can call.
Add up to 16 Pre-set numbers that can call or be called by the watch directly.
Record Messages – send recorded messages to and from the watch.
Shake%Shake to make friends – Shake 2 watches at the same time to share
contact details for messaging each other with up to 10 contacts.
Alert Messaging – receive SOS, Low Battery and Geo-Zone alerts directly to the
App.
Multi User – Add up to 16 users, for all the family and or several carers.
Watch Function – Time, Day & Date.
Built in Sim Card – Open the box and get started straight away. WatchOvers Sim
card uses the strongest network available, vital in an emergency.*
Sim card slot with option to use your own sim card.**
Multi Alarms – Set multiple repeat alarms or reminders which will ring on the
watch at the set times, very useful for appointments, medical & other reminders.
Low-power consumption, up to 2 hours call use and up to 48 hours general use or
72 hours in manual location mode.
Supports GPS/LBS/WiFi/Cell ID for quick and accurate outdoor location
positioning with indoor location accuracy dependent on access to LBS/WiFi/Cell ID
networks.
* A subscription is required for Mobile Calls and Data, Pre-paid monthly, No Contract,
Opt Out Anytime. Our ‘always roaming’ Spanish sim card has no roaming charges in 31
countries and unlike standard sim cards, they use the strongest mobile network
4"
"
available, enabling the watch to get mobile coverage even in weak signal locations, vital
in times of emergency.
** To use your own sim you must subscribe for the 1st month which also registers your
warranty and gives you the 1st month’s usage bundle. Simply email
the watch to use your own sim card. See below on installing your own sim card
Charging
To protect the battery, please charge the watch for at least 12 hours for the 1st charge
and for over 8 hours for the 2nd and 3rd charges. Always use the USB cable provided
and a CE approved USB charger plug to avoid irreparable damage.
About the Assure Watch Phone
The Assure is a smart mobile phone watch with GPS/AGPS/LBS/WIFI tracking. It is
equipped with GPS tracker and SOS functions. Wearers can make and receive phone
calls to and from the pre-set contact numbers with 1 button press. The Assure is easily
managed through our Free App available on the App Store and Google Play Store.
With a sim card installed, the watch will not shutdown unless the battery loses all charge.
Without a SIM card, it works only as a watch.
Note: When adding telephone numbers to the App, best practice is to use your
international code such as +44, +353, +33, +49, +39, +34 etc.
Warranty
This product is guaranteed by the manufacturer for a period of 1 year from the date of
purchase. This guarantee does not cover defects arising from accidental damage,
misuse or wear and tear and is available only to the original purchaser of the product.
This does not affect your statutory rights.
Box Contents
1 Assure GPS Mobile Watch-Phone, 1x USB Cable and 1x Users’ Manual.
5"
"
Watch Components
Display Information
WatchOvers SIM card
This Watch relies on GPS technology and as a mobile device, in order for it to work it
requires a Micro SIM card with a 2G data and voice plan included.
Your WatchOvers watch comes with a sim card pre- fitted so you can charge the device,
subscribe online and are ready to go. This sim card is a European ‘always roaming’ sim
card with a Spanish mobile number which, unlike standard sim cards, will always use the
strongest mobile network that the watch is located in, not just the network of the sim
card provider, so the watch will get the best network coverage available for that area.
As our Assure watch is a SOS Location device, this is a key feature. The always roaming
feature does not work in the country the sim card is issued from, i.e. Spain
Should you wish to use your own sim card, you must subscribe for the 1st month, which
will also register your warranty and give you 1 months use. During that month, email
subscription. Your subscription will be cancelled, the sim deactivated and set up for use
of your own sim. See Installing your own sim card instructions below.
6"
"
Getting Set Up
Power On: Press the SOS/Dialling/Answer button for 3 seconds to power on the watch
until you see WatchOvers appear on the screen.
Step 1 -Activate the SIM Card and Warranty
Your Assure Watch-Phone comes with a mobile SIM card fitted. To activate your watch
sim card and warranty go to www.watchovers.com/subscribe/ and set up your
subscription.
Step 2 - Charge the Watch & Power On
1) Plug the USB power cable provided into the charging port on the watch.
2) Press and hold the SOS Button until WatchOvers appears on screen. Your watch
will activate on the mobile network within a few minutes and you will see the
mobile signal strength on the left of the screen.
All Watch functions are set-up and managed through the App including displaying the
correct time and date.
Step 3 -Download the WatchOvers APP
Scan the QR code on the side of the box,
OR on your smart phone go to www.watchovers.com and download our App by clicking
on the App Store or Google Play Buttons,
OR search for "WatchOvers Assure" in Google play or the App Store to download our App
and click install.
After install is complete please click “OK” to allow notifications in order to receive alerts
& notifications.
Note: Screens may vary for Android and iOS and as we update our App.
Step 4 - Register your Administrator Account
1) Connect your phone with WiFi or switch ON your mobile data to get the internet
connection.
2) On the App login screen click New User, enter your email address and your mobile
number and click Next to receive your registration code automatically by email.
3) Enter the registration code (within 10 minutes or repeat the process) and click
Next.
4) Enter a password that you will remember and click Register.
Note: All phone numbers in the App should be setup using the international prefix such
as +44, +353, +33, +49, +39, +34 etc. so they work with the watch when travelling to
another country.
7"
"
" "
Step 5 - Pairing your Watch with the APP
1) Sign in to the App and Click on the Watch + icon.
2) Scan the QR code in this manual and also on the inside lid of the box.
OR manually enter the 15 digit WID number printed on the QR code and click OK.
3) Enter a Watch Users Name and then enter the Watch Mobile Number printed on
the side of the box.
Note: The first account connected with the watch will become the watch administrator.
You can add the watch to a maximum of 16 accounts.
8"
"
Step – 6 Add Contact Numbers
Your account and watch is now set up. You can add up to 16 contact numbers including
the administrator in the contact list.
1) Press the Family List icon to enter the setting page.
2) Click “+”on the top right of the page to add a contact name and number.
Note: Remember to use the international dialling code when adding contact numbers.
""" "
9"
"
Using the APP
Note: Calls to the watch will not be connected if your “Caller ID is blocked in your phone
settings.
Main Screen
After logging in, you will see the main screen as per the screenshots below. It shows
your added watch with information such as your watch name / date / time, the precise
location and the main functions of the watch.
Press the person icon (persons face) on the top of the “tree” on this main screen pictured
on the right, to edit the user information of the watch – see the 3rd screenshot below.
Note: If you have 2 or more watches added to your account, you will see a face for each
watch. The settings relate to the larger face in the middle of the screen. You can switch
between watches and settings by swiping the smaller face into the larger face location.
10"
"
To add a photograph of the wearer, press the person icon in the User info page.
Message Center
Press the Message center icon on the main screen to open the message page and view
all messages from the watch and the system. All you notifications can be viewed here.
To delete your messages, press the Bin icon on the top right of the screen and click OK
Autres manuels pour Assure
1
Table des matières
Autres manuels WatchOvers Montre
