Wansview Q5 Manuel utilisateur
V1.0
Wansview Cloud APP User Manual
1080P Indoor Security CameraQ5/Q6
Contents
Chapter 2 Install Wansview Cloud APP 04
04
04
05
Chapter 1 Camera Introduction 02
03
Chapter3 Setup Mode 06
06
08
12
13
13
14
16
18
Chapter 4 Live Feed 11
Chapter 5 Settings and Functions 12
Chapter 6 Optional Storages 17
20
22
Chapter 7 Me page 23
Chapter 8 Alexa Compatibility 24
2.1 Download app
2.2 Account Register
2.3 Sign in
3.1 Wi-Fi Setup
3.2 Wi-Fi connection by Soft-AP
5.1 Share with Family
5.2 Motion Detection
5.3 Motion Alert
5.4 RTSP and ONVIF
5.5 Camera Information
5.6 Advanced Settings
6.1 Memory Card Storage
6.2 Cloud Services
1.1 Indicator Light Status
02
Chapter 1 Camera Introduction
Model Q5
Model Q5
Photosensor
Leds
Microphone
Micro SD Card Slot
Infrared LED
Speaker
Indicator light
Power port
Reset button
1
1
6
7
8
6
7
8
9
9
2
3
4
1
2
3
4
5
5
2
3
4
5
6
7
8
9
Photosensor
Infrared LED
Microphone
Micro SD Card Slot
Lens
Speaker
Indicator lights
Power port
Reset button
1
2
3
4
5
6
7
8
9
03
Indicator lights status
Camera is powered on
Waiting for connect now
Red and blue lights are
flashing alternately
Blue light is flashing
Red light is flashing quickly
Camera is connecting to Wi-Fi
Connect WIFI and Pair successfullyBlue light is solid
Reset camera to factory setting
Red light on
Camera StatusLight Status
Warm note: Please make sure your router is connected to Internet.
Chapter 2 Install Wansview Cloud APP
2.1 Download app
Please download Wansview Cloud app from APP store/Google Play.
2.2 Account Register
Enter your email address and the password.
Pay attention that your password MUST be 8-16 characters, and include at least 3 categories
of the following: Digits,Uppercase characters, Lowercase characters, Special characters.
Read and agree the Terms of Use and Privacy Policy, then tap Next.
②
Open the Wansview Cloud app and click【Sign up】
①
1
2
04
Please go to your mailbox to find a mail that includes a verification code,enter the code to
finish the Sign up.
If you cannot find the mail, please check the spam or and tap Re-send mail. Or you can
number or Google account to sign in.
③
2.3 Sign in
When using for the first time, you need to enter the email address and password of your app
account to log in.
After signing in successfully, you can set a gesture login or Touch ID. (Wansview cloud
app--Me page--【Account security】--【Touch ID/Gesture login】)
3
05
3.1 Wi-Fi Setup
Chapter3 Setup Mode
Note: The camera can only support 2.4Ghz Wi-Fi, it doesn’t support 5Ghz Wi-Fi.
①Place the camera near the router within 3 feet and power on the camera with the attached
power cord. Make your phone use the 2.4G Wi-Fi.
②Tap 【Add Device】on the APP, and choose the camera model Q5 or Q6.
③Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】.
1
2
3
06
⑥Check the indicator light status. If the connection is successful, the blue light will be solid.
You can rename the camera, and start using the camera.
④The Wi-Fi name will be displayed automatically, then enter the correct Wi-Fi password and
tap Next.
If Wi-Fi name is not displayed, for Android phone, please go to the Phone Setting--APP Man-
agement--Find Wansview Cloud APP--Permissions--Allow the app to get the location info.
⑤Adjust your screen brightness to the medium,then place the camera lens about 3-8 inches in
front of the phone and make the camera scan the QR code on the phone screen.
When hearing”QR code scanning is successful”, tap Next.
4
5
6
07
3.2 Wi-Fi connection by Soft-AP
①Place the camera near the router within 3 feet and power on the camera with the attached
power cord. Make your phone to use the 2.4G Wi-Fi.
②Tap Add Device on the APP, and choose the camera model Q5 or Q6.
③Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】.
1
2
3
08
④Click “Didn’t you hear it?” and select 【Wi-Fi connection by Soft-AP】. Use your phone
camera to scan the QR code on the camera sticker.
⑤Check if the camera's indicator light is flashing red and blue. If yes, tap【Flashing】.
Please go to Settings--Find a Wi-Fi named WVC***** if fail to join and connect with this Wi-Fi.
Then go back to Wansview Cloud app.
4
5
09
Autres manuels pour Q5
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Wansview Caméra de sécurité
Wansview
Wansview W3 Manuel utilisateur
Wansview
Wansview W6 Manuel utilisateur
Wansview
Wansview B3 Manuel utilisateur
Wansview
Wansview Q7 Manuel utilisateur
Wansview
Wansview W7 Manuel utilisateur
Wansview
Wansview NCZ-550W Manuel utilisateur
Wansview
Wansview K5 Manuel utilisateur
Wansview
Wansview NCS601W Manuel utilisateur
Wansview
Wansview B4 Manuel utilisateur
Wansview
Wansview B3 Manuel utilisateur
