WAM SILOTOP zero Guide de l'utilisateur
2
fax
e-mail
internet
+ 39 / 0535 / 618111
+ 39 / 0535 / 618226
www.wamgroup.com
WAMGROUP S.p.A.
Via Cavour, 338
I-41030 Ponte Motta
Cavezzo (MO) - ITALY
Manual No. FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
Latest update: July 2022
ORIGINAL INSTRUCTIONS IN ENGLISH
SILO VENTING FILTERS
EN
ASSEMBLY AND
MAIN INSTRUCTIONS
FOR USE AND
MAINTENANCE
All the products described in this catalogue are manufactured according to WAMGROUP S.p.A. Quality System procedures.
The Company’s Quality System, certied in July 1994 according to International Standards UNI EN ISO 9002 and extended to
the latest release of UNI EN ISO 9001, ensures that the entire production process, starting from the processing of the order to the
technical service after delivery, is carried out in a controlled manner that guarantees the quality standard of the product.
This publication cancels and replaces any previous edition and revision.
We reserve the right to implement modications without notice.
This catalogue cannot be reproduced, even partially, without prior written consent by the Manufacturer.
INDEX 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
III
1.0 GENERAL INFORMATION ......................................................................................................................1
1.1 Scope of the Manual .........................................................................................................................1
1.2 Symbols ............................................................................................................................................2
1.3 Glossary and terminology .................................................................................................................4
1.4 Manufacturer’s data and identication of equipment.........................................................................5
1.5 Request for assistance......................................................................................................................6
1.6 Warranty............................................................................................................................................6
1.7 Exclusion of responsibility .................................................................................................................6
2.0 INFORMATION REGARDING SAFETY...................................................................................................7
2.1 General safety prescriptions .............................................................................................................7
2.2 Safety prescriptions for transport and handling.................................................................................7
2.3 Safety prescriptions for installation ...................................................................................................8
2.4 Safety prescriptions for use and operation........................................................................................8
2.5 Safety prescriptions for maintenance and replacement of components ...........................................8
2.6 Safety recommendations on biological risks ..................................................................................... 9
3.0 TECHNICAL INFORMATION .................................................................................................................10
3.1 General description of the equipment .............................................................................................10
3.2 Main components............................................................................................................................ 11
3.3 Operating principle ..........................................................................................................................12
3.4 Permitted use ..................................................................................................................................12
3.5 Improper use not permitted .............................................................................................................12
3.6 Noise level.......................................................................................................................................13
3.7 Environmental operating limits ........................................................................................................13
3.8 Limits of use ....................................................................................................................................13
3.9 Safety and information signs...........................................................................................................14
4.0 INFORMATION REGARDING HANDLING AND TRANSPORT.............................................................15
4.1 Type of packaging ...........................................................................................................................15
4.2 Reception of goods .........................................................................................................................16
4.3 Lifting and unloading methods ........................................................................................................16
5.0 INSTALLATION AND FIXING.................................................................................................................18
5.1 Safety prescriptions for installation .................................................................................................18
5.2 Positioning the lter ange ..............................................................................................................20
5.3 Electronic board - connections and settings ...................................................................................21
5.4 Electrical connection .......................................................................................................................21
5.5 Pneumatic connection.....................................................................................................................22
5.6 Emissions sampling kit....................................................................................................................25
5.7 Inspection........................................................................................................................................28
5.8 Start-up ...........................................................................................................................................28
TABLE OF CONTENTS
INDEX 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
IV
6.0 INFORMATION REGARDING USE .......................................................................................................29
6.1 Production Start-up .........................................................................................................................29
6.2 Machine shut-down at the end of the work cycle ............................................................................29
6.3 Long shut-downs of the equipment ................................................................................................30
6.4 Reuse after long shut-down ............................................................................................................30
7.0 INFORMATION REGARDING MAINTENANCE ....................................................................................31
7.1 Periodic checking ............................................................................................................................31
7.2 Cleaning the equipment (the machine) ...........................................................................................36
7.3 Replacing the lter elements...........................................................................................................36
8.0 REPLACEMENT OF PARTS..................................................................................................................37
8.1 Safety recommendations for replacement ......................................................................................37
8.2 How to open / close the hatch.........................................................................................................37
8.3 Replacing the lter elements...........................................................................................................38
8.4 Replacing the solenoid valve ..........................................................................................................40
8.5 Returning the equipment (the machine)..........................................................................................41
8.6 Dismantling and disposal ................................................................................................................41
9.0 INFORMATION REGARDING FAULTS .................................................................................................42
9.1 Trouble-shooting .............................................................................................................................42
9.2 Check-list in case of fault ................................................................................................................44
10.0 TECHNICAL DATA.................................................................................................................................45
10.1 Dimensions and weights ...............................................................................................................45
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
1
This Manual has been prepared by the Manufacturer to provide the operating technical information for instal-
lation, operation and maintenance of the equipment concerned.
The Manual, which is an integral part of the equipment concerned, must be preserved throughout the life of the
equipment in a known easily accessible place, available for consultation whenever required.
If the Manual is lost, damaged or becomes illegible, contact the Manufacturer for a copy specifying the serial
number of the equipment.
If the equipment concerned changes ownership, the Manual has to be handed over to the new owner as part
of the equipment supply.
The Manual is meant for specialist technical personnel appointed and authorized by the Manufacturer, owner
and installer to act on the equipment concerned for which specic technical skills in the sector concerned are
necessary (electrical, mechanical, etc.).
The illustrations may dier from the actual structure of the equipment concerned but do not interfere with the
explanation of the operations.
In case of doubt, contact the Manufacturer for explanations.
The Manufacturer reserves the right to make changes to the Manual without the obligation to provide prior
notication, except in case of modications concerning the safety level.
The technical information included in this Instruction Manual is the property of the Manufacturer and therefore
has to be considered as condential.
It is forbidden to use the Manual for purposes other than those strictly linked to the operation and maintenance
of the equipment concerned.
This information is provided by the Manufacturer in the original language (English) and can be translated into
other languages to satisfy legislative and/or commercial requirements.
1.1 Scope of the Manual
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
2
To highlight certain parts of the text, for purposes of safety, or to indicate important information, certain symbols
are used, the meaning of which is described below.
It is important to comply with and scrupulously follow the information highlighted by the symbols.
Danger - Warning
Indicates situations of serious danger which, if ignored, can be risky for the health and safety of per-
sons.
Caution
Indicates that appropriate behaviour must be adopted to avoid posing risk for the health and safety of
persons and avoid causing economic damage.
Important
Indicates particularly important technical information which must not be ignored.
1.2 Symbols
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
3
Symbol
representation
Symbol description
Danger sign: indicates danger of electric shock caused by the presence of powered
components inside the junction box or control panel.
Obligation: read this Manual before carrying out any action on the equipment con-
cerned.
Forbidden: indicates that it is forbidden to lubricate or adjust moving parts.
Danger: indicates danger of serious injury to limbs if the internal moving parts of the
equipment are exposed. Before opening inspection or maintenance hatches or doors
isolate the equipment concerned from the electrical energy sources.
Information: indicates the direction of rotation of the electric motor.
Obligation: indicates the hooking points for lifting each section of the equipment con-
cerned.
Forbidden: indicates it is forbidden to introduce hands into the equipment.
List of safety and information symbols
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
4
Operator: person appropriately trained and authorized by the Production Manager for setting up the equip-
ment concerned and carrying out routine maintenance.
Installer: organization with specialized technicians and appropriate equipment for carrying out risk-free instal-
lation and extraordinary maintenance.
Specialist technician: person responsible for and authorized by the Manufacturer, owner or installer to act on
the equipment; must have specic technical skills depending on the sector concerned (electrical, mechanical
etc.). The specialist technician, in addition to being familiar with the working of the equipment concerned, must
be familiar with the working of the plant or equipment on which the equipment concerned is installed.
Routine maintenance: includes all the actions necessary to keep the equipment in good working conditions,
to ensure greater operating durability and to keep the safety requisites constant.
Extraordinary maintenance: all the actions meant to keep the equipment in perfect working order.
Setting in safety conditions: all the precautions the authorized personnel must adopt before acting on
the equipment concerned.
The precautions are listed below.
- Ensure that the equipment concerned is disconnected from all the mains and appropriate devices
are used to prevent these from being reconnected accidentally.
- Ensure that all the moving parts of the equipment have come to a complete stop.
- Ensure the temperature of the equipment concerned is such that it does not burn.
- Provide appropriate lighting in the area around the operations.
- Wait for the material to be handled inside the equipment or machine concerned to settle down com-
pletely.
1.3 Glossary and terminology
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
5
Important
Do not change the data on the identication plate.
Keep ID plates clean, intact and legible.
If an ID plate is damaged or no longer legible (even if only one piece of information on it) contact the
Manufacturer and ask for a new ID plate and replace it.
Illustrated ID plates identify the equipment and its main components.
Plates show the necessary references for a safe operation.
1.4 Manufacturer’s data and identication of equipment
1
1 - Filter identication plate
A) Year of manufacture
B) Manufacturer’s name and address
C) Identication of the equipment
D) Serial No.
E) Weight of the equipment
D
CE
A
B
WAMGROUP
Kg
WA
LY
Year
TYPE:
Serial N0.:
COD: 063002012
1.0 GENERAL INFORMATION 2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
6
For all technical assistance, contact the Manufacturer’s service network.
For all requests, provide the equipment identication data, the type of problem encountered and all other infor-
mation which could be useful for identifying the problem.
The conditions for validity and applicability of the warranty are specied in the sales contract.
The equipment is delivered according to the specications indicated by the Buyer in the order and the condi-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
- by unauthorized persons and/or persons not suciently trained for installation, operation and maintenance;
- with modications made to the original conguration without the Manufacturer’s permission;
- with spare parts that are not original or are not specic for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.5 Request for assistance
1.6 Warranty
1.7 Exclusion of responsibility
Table des matières
Manuels Système de filtration d'eau populaires d'autres marques
Wisy
Wisy LineAir 100 Manuel utilisateur
Schaffner
Schaffner Ecosine FN3446 Series Manuel d'utilisation
Pentair
Pentair FLECK 4600 SXT Guide de l'utilisateur
H2O International
H2O International H20-500 Manuel utilisateur
Renkforce
Renkforce 2306241 Manuel utilisateur
Neo-Pure
Neo-Pure TL3-A502 Manuel utilisateur
