BASIC OPERATION
Your WiFi Bridge should be professionally installed by one of Walmart InHome’s preferred installers. If
something is wrong with your WiFi Bridge or other Walmart-supplied devices for your InHome system,
please contact customer support at 1-833-235-2111.
The WiFi Bridge should be placed within a central location where wireless internet signal is available. The WiFi
Bridge should also be placed within proper distance of the Garage Door Controller that will be used for the
InHome service. Please use the provided power supply as use of an unauthorized power supply may damage
the unit and void your warranty.
Once the WiFi Bridge has been set up and is operational, the WiFi Bridge's LED front indicator should be lit
solid white during normal operation. If the WiFi Bridge is not setup correctly and the LED is blinking, please
contact customer support.
To update or change the wireless network your WiFi Bridge is connected to, go to the “Settings” page of the
InHome app by tapping the gear icon at the top right corner of the home screen. This will take you to a page
where you can change the network your Wifi Bridge connects to.
Z-WAVE FUNCTIONALITY AND ADVANCED FEATURES
The WiFi Bridge is a Z-Wave certified central static controller. It is a security enabled Z-Wave product.
The WiFi Bridge ignores Basic Command Class Set commands.
This WiFi Bridge can be operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to
increase reliability of the network.
This WiFi Bridge has one Association Group, commonly referred to as ‘Lifeline’.
If the access device is not included using S2 or included correctly using S2, it will default to S0 security.
EXCLUSION
1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)
2. Select the About page
3. Select ‘Advanced Z-Wave Utilities’
4. Select ‘Exclude garage opener’ to put the bridge in Exclusion Mode. Refer to the manufacturer’s
instruction for exclusion.
5. The app will indicate when device exclusion is successful.
INCLUSION
1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)
