Wagan Solar + LED Floodlight 1000 Manuel utilisateur
Item No. / Artículo No: 8576 -2
8576-9
Solar + LED Floodlight 1000
Solar + Reflector LED 1000
User’s M anual / Manual de Usuario
We are constantly improving our products so specifications are subject to change
without notice. Visit our website for the latest product information.
Estamos mejorando nuestros productos constantemente, por lo tanto, las
especificaciones están sujetas a cambios sin previo aviso. Visite nuestro sitio
web para obtener la información más reciente de los productos.
RoHS
compliant
Solar + LED Floodlight 1000 by Wagan Tech®
1www.wagan.com
Thank you for purchasing the Solar + LED Floodlight 1000 with Remote Control
by Wagan Tech®. With normal care and proper treatment, it will provide years of
reliable service. Please read all operating instructions carefully before use.
⑧
①
②③
④
⑤
⑧⑩
⑨
⑦
⑥
1. Solar panel
2. Light panel
3. PIR detector
4. Timer indication LED
5. Mounting plate
6. Remote control
7. U-bolt
8. M6 big flat washer
9. M6 spring washer
10. M6 nut
11. Expansion bolt
©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
2
SPECIFICATIONS
Solar panel 6.5W, 10 year life span
Battery 3.7V, 12000 mAh, Li-ion
LED count 30
Brightness (Lumens) Up to 1000 lm
Recharge time 10 hours bright sunlight
Lighting time More than 3nights (Dim lighting mode)
PIR sensor 16–26 ft (5~8 m), 120°
Waterproof IP65
Install height 8–11 ft (2.5~3.5 m)
Materials Aluminum, Poly-carbonate
Size 18.0 × 9.7 × 3.4 inches
(450 × 246 × 86 mm)
Working temperature −13 °F to 149 °F (−25 °C to 65 °C)
Warranty 1 year
FEATURES
• Flexible installation: pole or wall mounted.
• Wide area lighting
• Adjustable installation angle
• Remote control function can choose lighting time and brightness.
Solar + LED Floodlight 1000 by Wagan Tech®
3www.wagan.com
APPLICATIONS
Suitable for outdoor wall or pole installation in plazas, parks, gardens,
courtyards, streets, walkways, pathways, campuses, airfields, farms, and
perimeter security.
INITIAL ACTIVATION
Activate the light by pressing the button on the underside of the light for 3
seconds. The light will come on for 5 seconds before turning off. To deactivate,
press and hold the button for 3 seconds. Otherwise, use the remote control to
switch it on or off.
©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
4
DEVICE INSTALLATION
Pole installation
As the below image shows: Take out the bolts and washers from the accessories
bag for pole installation and attach the light to the pole with the U-bolts.
M6 big flat washers
M6 spring washer
M6 nut U-bolts
Wall installation
First, remove the U-bolts. Make 4 holes in the wall and take out the expansion
bolt and washer. Attach the light onto the wall.
M6 big flat washers
M6 spring washer
M8 nut
Expansion bolts
Please install the solar panel in a place without any shade and facing direct
sunlight for better charging.
Solar + LED Floodlight 1000 by Wagan Tech®
5www.wagan.com
After installation, the light angle can be adjusted.
As shown in the diagram below, there are 3 different available angles.
15°
②
①
③
30°
DEFAULT OPERATION
By default the light is off during the day and comes on automatically at night.
Without programming, it operates in motion detection mode M1 (described later).
©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
6
REMOTE CONTROL
The remote control uses 2 AAA batteries (not included)
Timer control
On/Off buttons
Motion detection control
Brightness control
PROGRAMMING THE LIGHT WITH THE REMOTE CONTROL
On/Off
ON: Turns on the light. When you first turn on the light, the initial default lighting
mode is motion detection mode M1 .
OFF: Turns off the light and saves the last lighting mode.
If you turn the light off one night, it will not come on the next night. You need to
press the ON button to turn it on for the next night.
Solar + LED Floodlight 1000 by Wagan Tech®
7www.wagan.com
There are 3 main modes the light can be operated in:
Motion Detection, Brightness Override and Timer mode.
Motion Detection
• M1 (default mode): Steady on at 10% brightness and then 100% brightness
when motion is detected by the PIR sensor. 30 seconds after motion ceases,
the light returns to 10% brightness.
• M2: Steady on at 30% brightness and then 100% brightness when motion
is detected by the PIR sensor. 30 seconds after motion ceases, the light
returns to 30% brightness.
8m
8m
Brightness Override
A constant brightness can be selected by pressing one of the four brightness
buttons on the remote. This will override the motion detection modes (M1 or M2).
• 10% - 100 lumens
• 30% - 300 lumens
• 60% - 600 lumens
• 100% - 1000 lumens
The light will remain at the set brightness until dawn, the end of the timer mode
(see next section) or until battery is low. If the battery is too low during the night
©2018 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User’s Manual—Read before using this equipment
8
while in brightness mode, then the light will reset to M1 mode the next night. If
the battery is not depleted, then the light will resume at the previous brightness
selected from the night before.
Timer Mode
To activate the light in timer mode for 1-8 hours and override the motion
detection modes (M1 or M2), select a brightness % button and then one of the
timer buttons (T1-T4). There is a switch located in the battery compartment of the
remote that toggles the T1-T4 buttons from 1-2-3-4 hours to 5-6-7-8 hours.
Hours Button
*Switch
position
in battery
compartment
Remote Switch
1T1 OFF
2T2 OFF
3 T3 OFF
4T4 OFF
5T1* ON*
6T2* ON*
7T3* ON*
8T4* ON*
EXAMPLES
• For 100% brightness for 4 hours, press the 100% button and then the T4
button (with the toggle switch set to OFF).
• For 30% brightness for 5 hours, press the 30% button and then the T1
button (with the toggle switch set to ON).
Solar + LED Floodlight 1000 by Wagan Tech®
9www.wagan.com
When the timer is over, it will reset to the default M1 motion detection mode and
repeat this program (Timer + M1) the following night, until another program is
selected.
To cancel the Timer mode, long press one of the T2, T3 or T4 buttons for 2
seconds. The indicator LED's on the light will flash 3 times.
Red LED indicators
MEMORY
The light will remember the last button/program pressed and revert to that setting
the following nights until a new program is set.
Examples:
• If you choose 60% (no timer) the first night and do not change it, it will keep
60% the next night. But if the battery is low, it will default to M1.
• If the light is set to 60% brightness for 4 hours on night 1, it will change to
M1 mode at the end of the 4 hours. On night 2, it will run the program for
60% brightness for 4 hours and then M1. This pattern will continue until
another button is pressed.
• If the battery drains during timer mode, the light will turn off but will keep
the same lighting mode the next night once the battery is recharged.
Table des matières
Langues :
Autres manuels Wagan Projecteur
Manuels Projecteur populaires d'autres marques
VIZULO
VIZULO Micro Martin Guide de l'utilisateur
EuroLite
EuroLite LED IP FL-100 SMD Manuel utilisateur
Cooper Wheelock
Cooper Wheelock XB12 Manuel utilisateur
Allen + Roth
Allen + Roth 17624-000 Manuel utilisateur
ADJ
ADJ 4 STAGE PAK Manuel utilisateur
Cooper Lighting
Cooper Lighting EGL91SW233 Manuel utilisateur
