WAC TERMINATOR UV Manuel utilisateur
TERMINATOR UV
Installation Instructions
works with the
Google Assistant
Please read and save these
instructions before installation
For all questions about your ceiling fan please read all
included instructions, installation procedures, trouble-
shooting guidelines and warranty information before
starting installation.
For fast service have the following information below
when you call:
For missing parts or general inquiries
call our trained technical sta at:
• Model Name and Number
• Part Number and Part Description
• Date Of Purchase and Purchase Location
Email: [email protected]
Or live chat at www.waclighting.com
Email: fansupport@waclighting.com
1-800-526-2588 option 01-800-526-2588 option 3
MON-FRI 8AM-8PM EST MON-FRI 8AM-8PM EST
GENERAL INQUIRIES FAN SUPPORT
DO NOT RETURN TO STORE
SAFETY RULES
breaker before beginning. All wiring must be in accordance with the National Electrical
Code “ANSI/NFPA 70” and local electrical codes. Electrical installation should be performed
by a licensed electrician. The fan must be mounted with a minimum of 7 ft. (2.1m)
(0.5m) from the edge of the fan blades to the surrounding walls. Do not install this product
set forth in the user manual. Failure to use the product as instructed may cause serious
injury or damage. Never place objects in the path of the fan blades. To avoid personal
injury or damage to the fan and other items, please be cautious when working around or
water or chemicals when cleaning the fan or fan blades. A dry cloth or lightly dampened
cloth will be suitable for most cleaning. After making electrical connections, spliced
conductors should be turned upward and pushed carefully up into the outletbox. The
wires should be spread apart with the grounded conductor and the equipment-grounding
conductor on one side of the outletbox, and the ungrounded conductor on the other side
of the outletbox.
All set screws must be checked and re-tightened where necessary before installation.
WARNING: UV Radiation Hazard. The lamp in this unit produces UV-C radiation. Direct
exposure of skin and eyes to UV-C radiation may cause damage similar to sunburn reaction
UV-C lamp. Skin burns and eye injuries from UV-C exposure usually resolve within a week
with no known long-term damage. Since the penetration depth of UV-C radiation is very
low, the risk of skin cancer, cataracts or permanent vision loss is also thought to be very
low. The type of eye injury associated with exposure to UV-C causes severe pain and a
feeling of having sand in the eyes. Sometimes people are unable to use their eyes for one
to two days. It can occur after a very short exposure (seconds to minutes) to UV-C radiation.
This product, including the UV-C lamp and all of the products components, should be used
as instructed in the user manual, including complying with all adequate safety safeguards,
including but not limited to, those indicated in the mounting instruction and/or user
manual. This product must be mounted and installed as instructed to ensure that the
UV-C lamp can be operated in a safe way.
WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This
product is designed for use only with the supplied parts and/or accessories designated for
use with this product by WAC. Substitution of parts or accessories not designated for use
with this product by WAC could result in personal injury or property damage and will void
the warranty. Contact an authorized dealer or the manufacturer if any parts are damaged
or missing.
WARNING: To reduce the risk of electric shock, this fan must be installed and operated
with the supplied wall control, or controlled from the WAC app.
WARNING: Do not use power tools to assemble or install your fan. Using power tools can
result in improper assembly which can lead to noise or fan damage,personal injury or
property damage.
WARNING: To reduce the risk of personal injury, do not bend the
blade arms when installing the brackets, balancing the blades or cleaning the fan.
WARNING: Do not insert foreign objects between rotating fan blades.
WARNING: Do not operate fan unless fan blades are in place. Noise and fan damage can
occur
WARNING: This appliance is not intended for use by young children without supervision.
WARNING:
other items, the outletbox and support structure must be securely mounted and capable
of reliably supporting a minimum of 35 Ibs (15.9 kg). Use only UL/cUL listed outletboxes
marked “FOR FAN SUPPORT.” Use only the screws and washers provided with the outletbox.
CAUTION: Before assembling your fan, refer to the“Making the Electrical Connections“
section. If you feel you do not have enough wiring knowledge or experience, have your
fan installed by a licensed electrican.
NOTE
NOTE: Suitable for Damp location per UL safety requirment.
For operation, maintenance, and troubleshooting information, visit http://waclighting.com/fan-support/
02 SAFETY RULES
WARNING: This equipment is designed for use with germicidal UV radiation sources and
must be installed in compliance with technical directions to prevent risk of personal injury
from UV radiation.
WARNING: UV radiation can pose a risk of personal injuries. Direct exposure can result in
damage to eyes and skin. To reduce risk of exposure this equipment must be installed in
accordance with the manufacturer’s installation instructions.
WARNING:
be considered as part of site planning. For example, UV light may lead to a change in the
color of paint that has not been UV stabilized. Fading or discoloration of materials directly
exposed to UV radiation should be considered normal wear. Use normal paints for the
surface (e.g., the ceiling) above the fan as they substantially absorb UV light. Do not paint
WARNING: It is the responsibility of the installer to ensure that persons will not be directly
exposed to UV or optical radiation during equipment operation. This will require the
installer to conduct an assessment of irradiance or illuminance levels in the surrounding
occupied spaces prior to occupancy.
WARNING: Equipment must be mounted in locations and heights where it will not be
readily subjected to tampering by unauthorized personnel.
WARNING: The use of accessory equipment not recommended by the manufacturer may
cause an unsafe condition.
WARNING: Do not use this equipment for any purpose other than intended use.
WARNING:
WARNING: Maintenance and servicing of this UV product must be performed by
authorized personnel. Service personnel must wear appropriate Personal Protective
Equipment (PPE) if the equipment will be in operation during the maintenance or servicing
work. Contact the equipment manufacturer for PPE recommendations and guidance.
Do not install the fan where the top of the UV module can be visible, for
example, beneath a catwalk or breezeway that will permit direct exposure to UV radiation.
Disclaimer: While there may be information here or on our website relating to the
SARS-CoV-2 , WAC Lighting makes no claims that its products can cure, treat or
prevent any conditions, including COVID-19. Always consult your healthcare
provider with any health-related questions. Whole room pathogen concentrations
will vary between installation locations, and the number of TERMINATOR UV fans installed,
TERMINATOR UV fans installed, and it is not possible to predict the extent of
reductions that will be achieved by the TERMINATOR UV in whole room air
in any particular room or environment. The TERMINATOR UV is not a substitute for good
building air exchange practices or manual cleaning and disinfection practices.
UV Safety Rules
THIS PRODUCT EMITS ULTRAVIOLET (UV) RADIATION. EXPOSURE TO UV
RADIATION CAN CAUSE SERIOUS PERSONAL INJURIES, INCLUDING DAMAGE TO
EYES AND SKIN. AVOID DIRECT EXPOSURE TO THE UV LIGHT. FOR MORE SAFETY
INSTRUCTIONS, PLEASE REFER TO PAGE 5 OF THE INSTRUCTION MANUAL (“UV
SAFETY RULES”).
Disclaimer: Failure to use the product as instructed may also negatively impact the
product’s eectiveness. Manufacturer and its aliates do not promise or warrant that the
use of this product will protect or prevent any user from infection and/or contamination.
This product is not approved nor intended to be used to disinfect any device, including
medical devices. In addition to and without limitation of any exclusions or limitations of
liability of the manufacturer and its aliates as set forth in the user manual or any
agreement for sale, distribution or otherwise making available of this product, the
manufacturer and its aliates shall have no responsibility or liability whatsoever for any
claim or damage that may arise from or relate to any use of this product outside of its
intended use or contrary to the installation and operation instructions, as described in the
user manual and any other documentation provider to the user, including mounting
instruction.
This WAC Smart Fan is:
DC
MOTOR
The WAC app synchronizes seamlessly with smart home devices you already own
GET SMART
works with the
Google Assistant
APP DOWNLOAD
Available for purchase on
the Google Pay and App Store
Quiet, reliable, and up to 70%
Wi-Fi and Bluetooth enabled
for unlimited control
Damp location-listed to the strictest
UL/cUL safety regulations
Compatible with our WAC app
Coordinate with smart devices
for voice-activated control
REMOTE CONTROL
RCUV-WT
Included with
each fan
6 fan speeds
Dims light to 1%
ON/OFF
Package Contents
Mounting Options
Installing the Mounting Bracket
Attaching the Fan Blades
Hanging the Fan
Making the Electrical Connections
Finishing the Installation
Installing the Adapter Plate
Installing the Cover
Controlling the Fan
Reset
Application
Accessories
Troubleshooting
9.
10.
10.
11.
12.
14.
15.
16.
17.
19.
20.
21.
24.
25.
4
7
8
9
10
11
12
13
14
15
5
5
6
7
TABLE OF CONTENTS
F-069U
8
Electrical tape
Phillips screwdriver Step ladder Wire cutters
NOTE: Before discarding packaging materials, be certain all parts have been removed.
NOTE: Place the parts from the hardware bag into a small container to keep them from being lost.
Hanging Weight: 14.5 lbs
MAC ID
03 TOOLS & MATERIALS REQUIRED
IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
9F-069U
NOTE:
NOTE: UV module comes pre-assembled onto the motor housing
1
6
3
8
5
4
13
2
7
10 12
1, 2
1If you need a replacement UV module - please order part no. UVF7IN-120V-R1-MODT
2If you need replacement glass pieces - please order part no. RPL-F-UV7IN-GLASS
Canopy Ring
RPL-CAN-CYL-**
Adapter Plate
Coupling
Cover
Hardware Bag
RPL-F069-PARTS
Canopy
RPL-CAN-CYL-**
Motor Housing,
Glass Pieces 2/2,
and UV module
Fan Blade 3/3
RPL-F069-60-BD-**
Remote Control
RCUV-WT
PACKAGE CONTENTS 04
Downrod
Assembly
RPL-HGR-ASM-8-**
Mounting
Bracket
RPL-HGR-ASM-8-**
Cover
RPL-F069U-COVER-** Receiver
F-R3-069-060
14
A: Junction Box
#10x38mm Pan Head Phillip Screws (2)
Ø5*14*1mm Flat Washer (2)
3/16” Star Washer (2)
B: Blades
1/4” x16mm+S Phil/Slotted Screws (7)
1/4” Φ6.6x13x0.8mm Flat Washer (7)
C: Safety Cable
Φ6.5x19x2mm Flat Washer (1)
3/16”(Φ5.2x8.4x1.0mm)
Wood Screws (1)
D: Wire Connectors (8)
(Found with the receiver)
Spring Washer
F-069U
10
2
05 MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET
1. Remove 1 set screw from mounting bracket and set aside for
use in Finishing the Installation.
2. Pass supply wires through mounting bracket and secure to
your cUL/UL outlet box. Your outlet box should come with
pre-installed screws for the mounting bracket.
Caution: Remember to disconnect
the power at the circuit breaker.
CAUTION: To prevent electrical shock, ensure electricity has been
turned o at the circuit breaker before beginning.
Figures 1 and 2 are examples of dierent ways to mount the
outletbox.
Use Ahardware if needed to mount your outlet box.
1
Standard Ceiling Slope Ceiling
To Switch To Switch
(Hot) (Hot)/
Switch
(Ground) (Ground)
(No Neutral)
(Neutral) *Bare or
Green
*Bare or
Green
AA
B
Table des matières
Autres manuels WAC Ventilateur
WAC
WAC F-005L-MB Manuel utilisateur
WAC
WAC ODYSSEY Manuel utilisateur
WAC
WAC SWIRL F-074L Manuel utilisateur
WAC
WAC San Francisco Flush Manuel utilisateur
WAC
WAC Geos Manuel utilisateur
WAC
WAC LOFT Manuel utilisateur
WAC
WAC BLITZEN F-060 Manuel utilisateur
WAC
WAC ECLIPSE F-053L Manuel utilisateur
WAC
WAC HUG Manuel utilisateur
WAC
WAC MOD Manuel utilisateur
