Wabtec PROD0842 Manuel utilisateur
The information contained in this document may contain confidential, proprietary and/or privileged material of either Wabtec Corporation or
one of its subsidiaries. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by
persons or entities other than the intended recipient is prohibited unless authorized in writing. If you have received this document in error,
please contact the sender and delete the material from any system and destroy any copies.
CAS-GPS
IVUBASICSYSTEMS
INSTALLATION MANUAL
DOCU0085 rev Q
Digital Mining Technology
3-Co-Wyn Close, Fountaindale
NSW, 2258
Australia
www.wabteccorp.com
2
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Document Control
Rev Description Review Approval Date
E Added shovel heading 19/11/2014
F Fixed inconsistent pinouts on 24way connector 27/03/2015
G Added Compliant Antenna Information (Page 6) DMc 19/11/2015
H Doc No. added and other adjustments NM, SW & MK 20/06/2016
J SWR testing added, Network Configuration antenna location altered to Suit Self Test NM 09/08/2016
K Updates to CAM/RF Installations Chapter Ignition / Power signals added Page 25 NM 23/09/2016
L Update Network Settings Image 05/10/2016
M Updates to Interconnections –4CAM/4RF 19/06/2019
N Branding updates, PROD0179 wiring reference correction 16/09/2021
P STEE0690 antenna washer assembly details added, dual IVU configuration removed
Q Updated WiFi, V2V & GNSS Antenna Gain Rohan Kennedy S Clifton 25/07/2022
Document Approval
Creator(s):
Reviewer(s):
Approved:
CREATED:
By P C Shivalingam at 12:10 pm, Jul 25, 2022
3
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Transport
All possible precautions are taken to protect the equipment against damage or losses
during shipment, however before accepting delivery, check all items against the packing list
or bill of lading. If there are shortages or evidence of physical damage, notify Digital Mining
Technology immediately.
Notify Digital Mining Technology within 7 days in case of shortages or discrepancies,
according to the packing list. This will help ensure a speedy resolution to any perceived
problems. Keep a record of all claims and correspondence. Photos are recommended.
Where practicable do not remove protective covers prior to installation unless there are
indications of damage. Boxes opened for inspection and inventory should be carefully
repacked to ensure protection of the contents or else the parts should be packaged and
stored in a safe place. Examine all packing boxes, wrappings and covers for items attached
to them, especially if the wrappings are to be discarded.
When preparing to ship the system, de-power for four, (4) days before transport.
4
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Storage
Where the equipment is not to be installed immediately, proper storage is
important to ensure protection of equipment and validity of warranty.
Storage Temperature: -30 °C to +85 °C
Storage Location: dry low humidity location
5
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Unpacking of Equipment
The method of packing used will depend on the size and quantity of equipment.
Take care when unpacking the equipment to avoid damage to the equipment
and ensure the use of correct manual handling techniques.
6
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Installation
Installation should be in accordance with:
•Vehicle manufacturers instructions.
•National/local & site regulations relevant to the location of install.
•The installation procedures defined by Digital Mining Technology and only performed by authorised and qualified installers.
This radio transmitter IC: 8903A-PROD08422 & IC: 8903A-PROD08472 has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
Cet émetteur radio IC : 8903A - PROD08422 & IC : 8903A - PROD08472 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous
avec le gain maximal admissible indiqué . types d'antennes non inclus dans cette liste , ayant un gain supérieur au gain maximum indiqué pour ce type , sont strictement
interdits pour une utilisation avec cet appareil.
GE Part#
Relevant Product
(x = any variant)
CAS
-GPS Port
Nominal
Impedance
Max. Gain
Operating Frequency
PROD0852 PROD084x-2 V2V 50 Ω +3dBi 902-928MHz
PROD0874 PROD084x-1 V2V 50 Ω +3dBi 821-896MHz
MISC0467 or
PROD1222 PROD084x-x GPS (Receive Only) 50 Ω +17 to +50 dB GPS: L1(1559 to 1610MHz), L2(1164 to 1215MHz)
Galileo: E1 (1559 to 1610MHz), E5(1164 to 1215MHz)
BDS: B1L (1559 to 1610MHz)
GLONASS: G1 (1559 to 1610MHz),G2 (1215 to 1300MHz)
PROD0854 PROD0847-x GSM / 3G 50 Ω 0dBi
+1.7dBi
+2.9dBi
700, 800, 850, 900, 1800, 1900, 2100, 2600 MHz
PROD0833 PROD084x-x Wi -Fi 50 Ω +3.0dBi 2400-2484MHz
7
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Consult with the client to confirm all equipment
mounting locations and power connections!
Do not weld on ROPs!
Do not drill through ROPs!
Note:
It is solely the responsibility of the Installer to ensure the installation is
compliant with the vehicle manufacturer’s instructions, national/local statutory
and site regulations.
Warning
8
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
Specialty Tools /Adhesives Required
▪Coax Crimpers –TOOL0112 & TOOL0254 for RG 58/214
▪Coax Cable Stripper –TOOL0113 for RG 58/59
▪Coax Cable Stripper –For RG 214
▪Soldering Iron –Butane
▪Heat gun
▪Torx Security Bit –T25
▪MetricAllen Key –4mm
▪Nutsert Tool –TOOL0253
▪Deutsch pin removal Tool –TOOL0256
9
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
▪Deutsch pin Crimping Tool –TOOL0068 or TOOL0101 / TOOL0102
▪Digital Multi-Meter
▪Hole Saws: 20mm –25mm
▪Self Amalgamating Tape –PLAS0684
▪Loctite 243 –CHEM0002
▪Loctite 248 –CHEM0044
▪30 Metre tape measure
▪Coaxial connector tightening tool, TOOL0264
Specialty Tools /Adhesives Required
10
CAS-GPS IVU BASIC SYSTEMS INSTALLATION MANUAL DOCU0085 Revision Q
In-Vehicle Unit (IVU)
Note: All IVUs have their “PRODXXXX” part number labelled on the flat underside of the housing.
PROD0842 PROD0847
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Wabtec Accessoires automobiles
