vulta FC-B45RBW Manuel utilisateur
FC-B45RBW
USER MANUAL
VOLCANO 880 LUMEN
CAMPING LED FLASHLIGHT
Thank you for choosing Vulta.
Designed for camping and hunting applications,
as well as emergency scenarios, the Vulta FC-
B45RBW is a high-output flashlight that produces
a maximum 880 lumens of bright white light
capable of penetrating deep into the woods. In
addition to the main CREE XM-L2 LED, the FC-
B45RBW is equipped with an array of secondary
LEDs that provide red or blue light, which is
perfect for reading maps, tracking animals, and
illuminating paths when your eyes are adjusted
to the dark.
The FC-B45RBW employs a dual-button side-
switch system to engage a total of eleven modes.
Seven constant-output modes range from 1 lm
Firefly mode to 880 lm Turbo mode, plus red and
blue constant outputs. There are also SOS and
three strobe modes, including alternating red
and blue strobes for emergency signaling and
communication.
Crafted from MIL-SPEC Type III hard anodized
aluminum alloy, and boasting a waterproof
rating of IPX-8, the FC-B45RBW is a rugged tool
that will withstand harsh environments. The
flashlight’s primary LED is housed in a deep,
smooth reflector to maximize throw distance,
ensuring the brilliance of a powerful searchlight
in a body that’s compact enough to fit in your coat
pocket.
02 VULTA VOLCANO
03
VULTA VOLCANO
PRECAUTIONS ⚠⚡
• Please read and follow these instructions and
keep this manual in a safe place.
• This flashlight is extremely bright and
can cause temporary or even permanent
blindness. Do not shine the flashlight in the
eyes of any person or animal. When turning
on the flashlight, make sure to point it down
or away from you and anyone else.
• The surface of this product can become hot
after prolonged use. Be careful when touching
it and make sure to keep it away from
anything flammable or combustible.
• Do not stand the flashlight upright on its lamp
head when powered on. In this position, the
lamp head can become dangerously hot and
damage the flashlight and anything nearby.
• Never leave the flashlight unattended when it
is powered on.
• Before storage and transportation, make
sure to lock the flashlight according to the
instructions in this manual. Before long-
term storage, remove the batteries to avoid
leakage.
• This product is compatible only with
alkaline, NiCd, or NiMH AA batteries. It is
not compatible with lithium (disposable or
rechargeable) AA batteries.
04 VULTA VOLCANO
• Always install AA batteries of the same type,
brand, and age. Do not combine different
types or brands, or old and new batteries. This
can cause the batteries to leak, overheat, or
explode.
• Install the batteries in the proper orientation
as indicated by the instructions in this manual.
• This product is waterproofed for freshwater
only. If it comes into contact with salt water,
immediately dry the flashlight and remove
the batteries, reassemble, and rinse with
freshwater. Dry thoroughly and install new
batteries.
• Do not attempt to disassemble or repair this
product. It is dangerous and will also void the
warranty.
• Keep this product away from children. Do not
leave children unattended near this product.
• Use only parts provided by the manufacturer.
• Make sure that this product is intact and that
there are no missing parts.
• To avoid damage to this product, be careful
not to overtighten or improperly thread any of
the threaded fittings.
• All photos are for illustrative purposes only.
05
VULTA VOLCANO
A
B
G
C
D
E
F
ALEDS
BLAMP HEAD
CMODE BUTTON
DPOWER BUTTON
EGRIP
FO-RING
GTAILCAP
HLANYARD
EYELETS
Also Included:
DIFFUSER CAP
LANYARD
SPARE O-RING
(×2)
USER MANUAL
TWO-YEAR
LIMITED
WARRANTY
PRODUCT DIAGRAM
H
06 VULTA VOLCANO
INSTALLING BATTERIES
The FC-B45RBW is powered by four AA
batteries—either alkaline, NiCd, or NiMH.
Note: Make sure to load the batteries with
the positive and negative terminals facing
the proper directions. The FC-B45RBW has
a reverse-polarity protection circuit that
prevents damage due to improper battery
installation, but the flashlight will not turn
on if the batteries are oriented incorrectly.
Lithium batteries are not recommended for
this flashlight.
To install batteries, follow these steps:
1. Make sure that the flashlight is turned
off.
2. Unscrew and remove the tailcap from
the flashlight.
3. Insert the batteries in the proper
orientations according to the + and -
symbols on the inside of the tailcap.
4. Align the tailcap’s pins with the
corresponding holes, and screw the
tailcap onto the flashlight until fully
tightened.
07
VULTA VOLCANO
OPERATION
The FC-B45RBW employs a dual-button side-
switch system to turn on the flashlight and
engage a total of eleven modes.
POWERING ON THE FC-B45RBW
To turn on the FC-B45RBW, press the Power
button. Upon powering on, the flashlight
will enter Turbo mode for 3 minutes before
entering High mode. The next time you power
on the flashlight, it will enter the most recent
normal (noncolor) constant-output mode,
including Firefly mode.
SETTING THE MODE
Turbo/High/Medium/Low: In addition to Turbo
mode, there are High, Medium, and Low
constant-output modes. Turbo is the highest
output but will switch to High mode after
three minutes in order to avoid overheating.
Press the Mode button to cycle through these
four constant-output modes in descending
order of brightness.
Firefly Mode: In Firefly mode, the flashlight
will emit 1 lm of light in constant output.
This is the lowest power setting on the FC-
B45RBW and will remain in effect until you
turn off Firefly mode. To enter Firefly mode,
08 VULTA VOLCANO
start with the flashlight either turned off or
in any normal (noncolor) mode. Press and
hold the mode button for approximately two
seconds until Firefly mode activates. To exit
this setting, press the Mode button. To turn
the flashlight off, press the Power button.
SOS: In SOS mode, the flashlight will blink
brightly in the international Morse code
distress signal pattern (· · · – – – · · ·). To enter
SOS mode, start with the flashlight powered
on, and then double-press the Mode button.
To turn the flashlight off, press the Power
button. To enter a constant-output mode,
press the Mode button.
Strobe: Strobe mode continuously emits quick
flashes of bright light. To enter Strobe mode,
quickly double-press the Power button in any
mode, even if the flashlight is turned off. To
turn the flashlight off, press the Power button.
To enter a constant-output mode, press the
Mode button.
COLOR MODES
The FC-B45RBW is equipped with an array
of six red and six blue LEDs along the
circumference of the lamp head. You can set
the flashlight to produce a constant red or
blue light, an alternating red and blue strobe,
09
VULTA VOLCANO
or an alternating red and blue strobe with a
bright white pulse.
To enter Color mode, start with the flashlight
turned off. Press and hold the power button
for approximately two seconds, until the
flashlight emits a constant red beam.
To cycle through the color modes, press the
mode button repeatedly.
To turn off the flashlight, press the power
button.
ELECTRONIC LOCK-OUT
The electronic lock-out feature prevents
accidental activation during storage and
transport.
To lock out the FC-B45RBW, press and
hold the Mode and Power buttons for
approximately two seconds, until the light
emits a series of quick, bright flashes.
Repeat these steps to unlock and turn on the
flashlight.
THE DIFFUSER CAP
The included diffuser cap softens the light
from the FC-B45RBW, which is ideal for
illuminating a small, enclosed environment
like a tent or a car.
10 VULTA VOLCANO
To install the diffuser cap, slowly fit it onto
the lamp head. It may help to rotate the cap
slightly while attaching it.
THE LANYARD
You can attach and wear the included lanyard
to help prevent accidental drops and to free
up a pocket. To attach the lanyard, thread
it through one of the lanyard eyelets on the
flashlight’s tailcap.
O-RING MAINTENANCE
The FC-B45RBW’s O-ring is installed on the
threaded portion to help seal out water. The
O-ring is prelubricated to extend its lifetime,
ensure smooth operation, and increase
water resistance. If the O-ring dries out or
there is little or no lubricant remaining, we
recommend applying a small amount of
O-ring lubricant.
The FC-B45RBW comes with two replacement
O-rings. If the original wears out after long-
term use, replace it with one of the included
spares.
Table des matières
Autres manuels vulta Lampe de poche
