Vulcan-Hart 63179 Instructions de montage
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21d
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 63179
Specifications
Total Combined Weight Capacity
(Evenly distributed from bottom up.) 500 lb
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
4. Do not exceed listed weight capacity for individual
components, evenly distributed from bottom up,
or overall combined weight capacity of 500 lb.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
5. Do not open more than one loaded
drawer at a time to avoid tipping.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Operate and store the Cabinet on
a flat, dry, level surface.
8. Read welding equipment manual before use.
9. If using gas cylinders, be especially careful
to prevent tipping or damage to the cylinders.
Follow gas cylinder supplier’s and gas
supplier’s safety instructions at all times.
10. People with pacemakers should consult their
physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
Page 3For technical questions, please call 1-888-866-5797.Item 63179
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 10.
Functions
Small
Divided
Drawer
Helmet
Storage
Cabinet
Locking Cabinet
with Adjustable
Shelves and
Storage on Door
Cylinder
Platform
Cable
Hooks
Cable
Hooks
Cylinder
Racks and
Chains
Handle
Cable
Hooks
TIG Rod
Holder
Large
Drawers
Large Shelf
for Welders
Cylinder
Racks
Page 4 For technical questions, please call 1-888-866-5797. Item 63179
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: Tighten all hardware securely.
Note: There are Handle Bolts (19) that are shorter than the other Bolts (1 & 5).
Set them aside before beginning assembly.
Attach Casters
Attach two Locking Swivel Casters (4) to bottom
of Cabinet with eight sets of Washers (3),
Spring Washers (2), and Caster Bolts (1).
Caster
Bolt (1)
Spring
Washer (2)
Washer
(3)
Locking
Swivel
Caster (4)
Attach Cylinder Platform
Attach Cylinder Platform (6) to bottom
of Cabinet with six Bolts (5).
Bolt
(5)
Cylinder
Platform (6)
Attach Tires
Attach two Tires (9) to Axle with
Washers (8) and Cap Nuts (7).
Tire
(9)
Washer
(8)
Cap
Nut (7)
Axle
Page 5For technical questions, please call 1-888-866-5797.Item 63179
Attach Cylinder Racks
Attach Cylinder Racks (14) to end of
Cabinet with eight Bolts (5).
Cylinder
Rack (14)
Bolt (5)
Attach TIG Rod Holder
Attach Top TIG Rod Holder (16) and
Bottom TIG Rod Holder (17) to back
of Cabinet with four Bolts (5).
Bolt (5)
Top TIG
Rod
Holder (16)
Bottom
TIG Rod
Holder (17)
Bolt (5)
Page 6 For technical questions, please call 1-888-866-5797. Item 63179
Attach Cable Hooks
Attach Cable Hooks (15) to back and side
of Cabinet with eight Bolts (5). Cable
Hook (15)
Bolt (5)
Attach Handle
Attach Handle (19) to side of Cabinet with
the slightly shorter Handle Bolts (18). Handle
(19)
Handle
Bolt
(18)
Page 7For technical questions, please call 1-888-866-5797.Item 63179
Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Make sure that the welder and all
accessories combined do not exceed
the weight capacity of this Cabinet.
2. Place gas cylinders on Cylinder Platform, then
secure in place by locking Cylinder Chains
into the slots on the Cylinder Racks.
3. Place the welder on the top shelf and other
accessories in the Drawers and Cabinets.
4. Make sure everything is secure and the Cabinet
is well balanced before moving the Cabinet.
If the welder is unstable or does not fit securely on
the top shelf, do not use that welder with this Cabinet.
Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
condition of the Cabinet. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
2. Wipe external surfaces of the
Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.
Page 8 For technical questions, please call 1-888-866-5797. Item 63179
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 9For technical questions, please call 1-888-866-5797.Item 63179
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts. Specify UPC 193175438119 when ordering parts.
Page 10 For technical questions, please call 1-888-866-5797. Item 63179
Parts List and Diagram
Parts List
Part Description Qty
1 Caster Bolt M8x14 8
2 Spring Washer M8 8
3 Washer M8 Ø20 8
4 4'' Locking Swivel Caster 2
5 Bolt M6x10 26
6 Cylinder Platform 1
7 Cap Nut M8 2
8 Washer M8 Ø24 2
9 8" Rubber Tire 2
10 Helmet Cabinet Door 1
11 Drawer B 2
12 Drawer A 1
Part Description Qty
13 Drawer A Divider 1
14 Cylinder Rack 4
15 Cable Hook 4
16 Top TIG Rod Holder 1
17 Bottom TIG Rod Holder 1
18 Handle Bolt M6x10 4
19 Handle 1
20 Cabinet 1
21 Locking Cabinet Door 1
22 Adjustable Shelf 2
23 Cylinder Chain 2
Table des matières
Manuels Accessoires de soudage populaires d'autres marques
Lincoln Electric
Lincoln Electric LT-7 Tractor Manuel utilisateur
Weco
Weco Trolley R Manuel utilisateur
Cornwell Tools
Cornwell Tools MMWC1 Manuel utilisateur
Dohle
Dohle ExOn2A Manuel utilisateur
Nederman
Nederman Fume Eliminator FE 840/2500/P150 Manuel utilisateur
3M
3M Speedglas 9100 Series Manuel utilisateur
Miller Electric
Miller Electric OM-842 Manuel utilisateur
Miller
Miller A-200 Series Manuel utilisateur
Abicor Binzel
Abicor Binzel ABIMIG WT Series Manuel utilisateur
optrel
optrel lifeflip autopilot Manuel utilisateur
Miller
Miller MIGmatic M-25 Manuel utilisateur
Tregaskiss
Tregaskiss TOUGH GUN TT3 Reamer Manuel utilisateur
