PREPARING FOR TREATMENT
MANUAL FOR WRENCH
With a special structure design,wrench makes sure that users can handling the tip effectively during
Using it,and protects user’s hand from hurting in the process of loading and unloading the tip.
Sterile environment: Temperature 135 degrees, Pressure 0.22Mpa,in the steam.
29
29
Steps:
(1)Align the legs of the wrench to the tip.
(2)Install the tip: grip the handle, rotate the tip in right-handwise till the tip dose not turn round
anymore.
(3)Unloading the tip: grip handle then rotate the tip in counter-clockwise by wrench to remove it.
(4)Once after using, please put the wrench into disinfection cabinet to disinfect.
(5)After disinfection, the surface temperature of the wrench is too high to be used again, so users
must wait until it is cool down, avoiding hurt.
(6)When not use the wrench, put it at some place that is dry and ventilated, and keep it clean.
SETTING THE ULTRASOUND POWER
