VP Networks SuperAP 570n Manuel utilisateur

SuperAP 570n

User Manual

October, 2012

Overview

The 570n 1 Watt AP/bridge offers excellent and reliable performance along ith

cost-effective point-to-multipoint outdoor and indoor ireless solutions perfectly suited for

access technology, private net orks and hotspots. The 570n orks in the unlicensed 2.4

GHz Wi-Fi frequency band. It supports the ne est IEEE 802.11n standard and is

compatible ith IEEE 802.11b/g, ith options for SISO and MIMO functionality. The

private protocol iPoll offers effective point-to-multipoint deployment scenarios.

Contents

1 Deployment Scenarios

♦ 1.1 HotSpot

♦ 1.2 Point to Multipoint

♦ 1.3 Light PTP

2 Initial Device Setup

♦ 2.1 Initial 570n Setup

♦ 2.2 Initial Station Setup

3 Operation Mode

♦ 3.1 Bridge Mode

♦ 3.2 Router Mode

4 General Device operation

♦ 4.1 Web Management Structure

♦ 4.2 570npling and Saving Configuration Changes

5 Configuration Guide

♦ 5.1 Status

5.1.1 Information

5.1.2 Net ork

5.1.3 Wireless

5.1.4 Routes

5.1.5 ARP

♦ 5.2 Configuration

5.2.1 Net ork

5.2.2 Bridge Mode

5.2.2.1 IPSettings

5.2.2.2 VLAN to SSID Mapping

5.2.2.3 Management VLAN

5.2.3 Router Mode

5.2.3.1 WAN Settings

5.2.3.2 LAN Settings

• 5.2.3.2.1 LAN DHCP Settings

5.2.4 Wireless

5.2.5 Wireless Mode: Access Point (auto WDS)

5.2.5.1 570n Basic Wireless Settings

5.2.5.2 570n Security Settings

5.2.5.3 570n Advanced Wireless Settings

5.2.6 Wireless Mode: Station

5.2.6.1 Station Basic Wireless Settings

5.2.6.2 Station Security Settings

5.2.6.3 Station Advanced Wireless Settings

5.2.7 Wireless Mode: iPoll Access Point

5.2.7.1 iPoll 570n Basic Wireless Settings

5.2.7.2 iPoll 570n Security Settings

5.2.7.3 iPoll 570n Advanced Wireless Settings

5.2.8 Wireless Mode: iPoll Station

5.2.8.1 iPoll Station Basic Wireless Settings

5.2.8.2 iPoll Station Security Settings

5.2.8.3 iPoll Station Advanced Wireless Settings

5.2.9 Virtual 570n

5.2.10 Wireless ACL

5.2.11 Traffic Shaping

5.2.11.1 Limit all traffic

5.2.11.2 Limit per IP traffic

5.2.12 Port For arding

5.2.13 Static Routes

♦ 5.3 Services

5.3.1 WNMS

5.3.2 System alerts

5.3.2.1 SNMP Traps Settings

5.3.2.2 SMTP Settings

5.3.3 SNMP Settings

⋅ 5.3.3.1 Clock/NTP

5.3.4 SSH

5.3.5 HTTP

♦ 5.4 System

5.4.1 Administration

5.4.1.1 Device settings

5.4.1.2 Account settings

5.4.1.3 System functions

5.4.2 Log

5.4.3 LED Control

5.4.4 Firm are Upgrade

♦ 5.5 Tools

5.5.1 Antenna Alignment

5.5.2 Site Survey

5.5.3 Delayed Reboot

5.5.4 Ping

5.5.5 Traceroute

5.5.6 Spectrum Analyzer

♦ 6 UAM (Universal Access Method)

6.1 UAM Overvie

6.2 UAM Configuration

6.3 White/Black List

Deployment Scenarios

HotSpot

The 570n can easily create a hotspot net ork on the 2.4 GHz unlicensed band. IEEE 802.11n

lets you achieve (depending on laptop, smart-phone or PDA capabilities) maximum throughput

and supports all possible client equipment (based on IEEE 802.11b/g/n). Hotspot zones can be

created indoor or outdoor. WLAN hotspots are very popular in hotels, MTU/MDU, hospitals,

schools, government buildings, companies, and retail.

Point to Multipoint

IEEE 802.11n ireless multipoint hich delivers several times higher throughput than 802.11a/g.

The 570n supports a private ireless point to multipoint protocol called iPoll hich allo s

connecting more than one iPoll Stations to the iPoll Access Point thus creating a robust point to

multi point net ork.

Lig t PTP

The 570n supports access point and station operating modes, therefore point-to-point can be

created bet een AP and Station, or bet een 2 Stations, or bet een 2 APs. There are available

options for SISO and MIMO antennas. Maximum achievable real data throughput is up to 160

Mbps.

Initial Device Setup

The default IP address is 192.168.2.66. To access the Web management interface, configure

your PC ith a static IP address on the 192.168.2.X subnet ith mask 255.255.255.0. Connect

the 570n device in to the same physical net ork as your PC. Open the Web bro ser and type the

default IP address of the 570n device https://192.168.2.66/and the login page ill be loaded.

Enter default administrator login settings:

The default administrator login settings are:

Pass ord: admin01

After successful administrator login you ill see the main page of the device Web management

interface. The device no is ready for configuration.

Initial 570n Setup

Follo the steps for initial ireless Access Point setup that ill be prepared to accept ireless

Station connections (refer to the section Initial Station Setup for instructions).

1. Connect an Ethernet cable bet een your computer and the 570n.

2. Make sure your computer is set to the same subnet as the 570n, i.e. 192.168.2.150

3. Start your Web bro ser.

4. 570n uses follo ing default settings:

WAN IP: 192.168.2.66

Subnet mask: 255.255.255.0

Username: admin

Pass ord: admin01

The initial login screen looks as follo :

Step 5. Enter the default pass ord, and then press the Login button to enter the 570n eb

management page.

Step 6. Navigate to the Configuration | Network tab and choose the Router net ork mode ith

NAT enabled, Static IP enabled on WAN side, LAN settings ith DHCP server enabled (to loan

an IP addresses for connected clients) on LAN side and click Save&Apply:

Step 7. Navigate to the Configuration | Wireless tab, choose Access Point ireless mode ith

WDS enabled, specify the SSID ith Broadcast enabled, Security parameters and IEEE mode

and click Save&Apply:

Step 8. Verify connection. Navigate to Status | Information menu to check if the Station is

successfully connected to the 570n device:

Initial Station Setup

Follo the steps for initial ireless client setup that ill be connected to the previously configured

570n (refer to the section Initial 570n Setup).

Step 1. Connect an Ethernet cable bet een your computer and the 570n device.

Step 2. Make sure your computer is set to the same subnet as the 570n, i.e. 192.168.2.150

Step 3. Start your Web bro ser.

Step 4. Each 570n devices uses follo ing default settings:

WAN IP: 192.168.2.66

Subnet mask: 255.255.255.0

Username: admin

Pass ord: admin01

The initial login screen looks as follo :

Step 5. Enter the default pass ord, and then press the Login button to enter the 570n eb

management page.

Step 6. Navigate to the Configuration | Network tab and choose the bridge net ork mode ith,

Dynamic IP enabled (be sure that 570n to hich the device ill be associated has a DHCP server

running (refer to the section Initial 570n Setup for instructions), specify the DHCP fallback

settings in case the DHCP server is unreachable and click Save&Apply button:

Step 7. Navigate to the Configuration | Wireless tab, choose Station WDS ireless mode, click

Scan button near the SSID entry field to choose the SSID of the 570n here the station ill be

associated to. Specify the Security parameters for the 570n, check IEEE mode (these settings

must conform ith 570n ireless settings) and click Save&Apply:

Table des matières

Autres manuels VP Networks Point d'accès sans fil

VP Networks

VP Networks MultiAP 700G Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur