Volt VAL-2102-0-BBZ Manuel utilisateur

VOLT®Low Voltage Landscape Lighting

VOLT®Tri-Hub Ultra- Slim Brass Downlight

VAL-2102-0-BBZ

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

www.voltlighting.com

Important Safety Instructions

- 2 -

VOLT®Tri-Hub Ultra-Slim Brass Downlight

VAL-2102-0-BBZ

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and UL listed wire connector so that it is

located within 6 inches (15.2 cm) from a building structure, a luminaire

or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Package Contents

Parts Required (sold separately)

Product Dimensions

[email protected] • 813.978.3700

- 3 -

A. Fixture

B. Mounting Hardware

C. Tool

D. Grommet

A. (1) MR11 Bulb

1.5”

3.8”

1.5”

2.5”

4.3”

5”

1.6”

1.65”

2.3”

2.1”

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 4 -

Remove Glare Guard and Lens

Bulb Installation

Install MR11 Bulb

VOLT®Tri-Hub Ultra-Slim Brass Downlight

VAL-2102-0-BBZ

Loosen the set screw to remove

the glare guard from lens.

Then unthread the lens and

remove it from the xture body.

Fixture Body

Lens Set Screw

Glare Guard

Insert the MR11 bulb with the

correct wattage and type marked

on the xture label and secure

into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

MR11 Bulb

Socket

Bulb Installation

Install Lens and Glare Guard

Fixture Body

Lens Set Screw

Glare Guard

Thread the lens back onto the

xture body and hand tighten

until snug.

Place the glare guard back onto

the lens and secure by using the

previously removed set screw.

[email protected] • 813.978.3700

- 5 -

Remove Backplate

Take off the backplate from the

hub by removing the screws on

the back.

Hub

Screw

Backplate

Wire Connection

2nd Wire

Connection

Main Supply Cable

Backplate

Hub

Terminal Block

Pass the main supply cable and 2nd wire connection through the center

hole on the backplate.

Strip the ends of both the main supply cable and 2nd wire connection

leads. Insert one side of the wire into one terminal block, then insert the

other side of the wire into the opposite terminal block.

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

VOLT®Tri-Hub Ultra-Slim Brass Downlight

VAL-2102-0-BBZ

Install Backplate

Hub

Screw

Backplate

Carefully tuck all the extra wire

inside of the hub and place

the backplate onto the hub.

Secure by using the previously

removed screws. Tighten with a

screwdriver.

Install Hub

Make sure the wire exit is facing

down when placing the mount

onto the surface. Secure using the

self-tapping screws.

Self-tapping Screw

Mounting

Surface

Cables

Wire Exit

Hub

[email protected] • 813.978.3700

- 7 -

Adjust Lamp Direction

Install/Replace Lamp

Glare Guard

Allen

Wrench

Knuckle

Allen Screw

ROTATE

Using an Allen wrench, loosen the

knuckle and adjust the xture

up and down to your desired

direction.

Once your desired direction is

achieved, tighten the knuckle

with the Allen wrench into place.

Using a smaller Allen wrench,

loosen the smaller Allen screw

underneath the xture to rotate

the xture side to side. Do not

rotate 3600. Tighten the Allen

screw when the desired direction

is achieved.

ROTATE

Remove the glare guard and the lens to expose the MR11 bulb and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the lens and the glare guard.

IMPORTANT: MR11 bulb must be protected from moisture and dust at all

times. Always reinstall the lens and the glare guard when removed.

- 8 -

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

IS-VAL-2102-0-BBZ-ver1.pdf

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table des matières

Autres manuels Volt Éclairage paysager

Volt

Volt VSPL-9001-25-BBZ Manuel utilisateur

Volt

Volt VFL-40 MS-ABZ Series Manuel utilisateur

Volt

Volt VFL-120V Series Manuel utilisateur

Volt

Volt VFL-430-4-BBK Manuel utilisateur

Volt

Volt Fat Boy Mini Spotlight Manuel utilisateur

Volt

Volt VSAC-PANEL1-SBK Manuel utilisateur

Volt

Volt Top Dog Innovator VPL-398 Manuel utilisateur

Volt

Volt VAL-180 Manuel utilisateur

Volt

Volt VUL-6804-25-BBZ Manuel utilisateur

Volt

Volt VFL-4007-4-BBZ Manuel utilisateur

Volt

Volt VHS-605-4-FPG Manuel utilisateur

Volt

Volt Big Par36 Brass Black Flood Manuel utilisateur

Volt

Volt VWL-7125-BBZ Manuel utilisateur

Volt

Volt VWL-500-4-PBK Manuel utilisateur

Volt

Volt VFL-451X-ABZ Manuel utilisateur

Volt

Volt VAL-2006-4-BBZ Manuel utilisateur

Volt

Volt VPL-1047-4-BBZ Manuel utilisateur

Volt

Volt 3602 Series Manuel utilisateur

Volt

Volt VAL-9501-4036-BBZ Manuel utilisateur

Volt

Volt VPL-1050-4-BBZ Manuel utilisateur

Volt

Volt VHS-6719-25-BBZ Manuel utilisateur

Volt

Volt VPL-1044-4-BBZ Manuel utilisateur

Volt

Volt LPL-PLKIT Manuel utilisateur

Volt

Volt VPL-1002 Series Manuel utilisateur

Manuels Éclairage paysager populaires d'autres marques

Intex

Intex SL1006 Manuel utilisateur

LED Group

LED Group ROBUS R2IN13W Manuel utilisateur

Patriot Lighting

Patriot Lighting 343-1484 Manuel utilisateur

Hess

Hess SERA G: SERA S Manuel utilisateur

LIGMAN

LIGMAN JET 44 Manuel utilisateur

LIGMAN

LIGMAN MALTA 1 Manuel utilisateur

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuel utilisateur

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuel utilisateur

Saxby Lighting

Saxby Lighting Islay 68784 Manuel

LIGMAN

LIGMAN EU-10016-3 Manuel utilisateur

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuel utilisateur

LIGMAN

LIGMAN KI-60475 Manuel utilisateur

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuel utilisateur

Malibu Boats

Malibu Boats CL905K Manuel utilisateur

LIGMAN

LIGMAN NYB-30161 Manuel utilisateur

LIGMAN

LIGMAN SI-80021 Manuel utilisateur

Malibu Boats

Malibu Boats CM110P Manuel utilisateur

U.S.T.E.

U.S.T.E. VISTA 8202 Manuel utilisateur