VOGELS RISE A151 Manuel utilisateur

HANDSET FUNCTIONS

WHAT TO DO IN CASE OF AN ERROR

Handset functions & what to do in case of an error:

Button functionality RISE

Nr. Function Required action

1 Going up Press Up button

2 Going down Press Down button

3a Reset system 1. Move system to lowest position.

2. Press Down button 10 sec.

3. Press Down button again to finish action.

a. Feedback: System goes to its lowest

position and 7 mm up.

3b Hard System Reset 1. Unplug power cable, wait for 30+ seconds and

plug in the power cable.

2. Move system to lowest position.

3. Press Down button 10 sec.

4. Press Down button again to finish action.

a. Feedback: System goes to its lowest position

and 7 mm up.

4a Unlock child lock Press Up and Down button 2 seconds simultaneously

Feedback: System goes up and down 7 mm.

4b Lock child lock System automatically locks 5 minutes after the

last interaction.

5 Disable/enable Press Up and Down button 20 seconds simultaneously

child lock feature Feedback: System goes up and down 7 mm twice.

Not working system guide:

1 Check whether all cables are still connected (power cable, handset cable,

gyroscope cable, etc.)

2 Check whether the system obstructed by an object (for example: a desk)

3 Check if the system's child lock is unlocked. Not sure? Unlock the system.

4 If there is no object obstructing the lift, run a system reset.

5 If a System Reset, doesn't solve it, try to run a Hard System Reset.

1. Open top cover

Open the top cover, (using a screwdriver

could be useful).

Aer opening you can pull it up.

2. Plug in cable

Plug the RISE A151 Programmer cable into

the controlbox, using the outer right slot.

INSTALLER SOFTWARE

OUICK GUIDE

BACK

3. Connect to PC

3a: Connect to PC

• Select port

• Press Connect

3b: Fill in password

• 0000

4. Le window

4a: Status of system:

Normal, reset or Error code (E…)

4b: • Displayed current height

• Arrows:

To move system up or down

• Move to:

- Set height

- Press ‘Move to’ to go to the

predeﬁned position

• Stop: Stop movement

(only needed in case of set

‘move to’)

4c: Press and hold to reset system

INSTALLER SOFTWARE

OUICK GUIDE

5. Conﬁgure - Overview

5a: Creates an overview of all settings

5b: Export Image:

Creates a screenshot of the page

5c: Export data:

Creates an overview of all the data

in an ‘.ini’ ﬁle

6. Conﬁgure - Settings

6a: Switching the child lock on/o:

• Press the switch

• Press Apply Parameters

Import Parameters:

Not accessible for Installer

INSTALLER SOFTWARE

OUICK GUIDE

3a 3b 3c

7. Conﬁgure - Limit

7a: Switch Top Limit and/or Bottom

Limit on/o

7b: Set a limit

7c: Apply Parameters to change the

settings

8. Monitoring graph

8a: Gives an overview of the current,

voltage and the position (height)

of the columns

8b: Clear Screen: Creates the graph blanc

8c: Export Image: Creates a screen shot

of the window

8d: Export Parameters:

Gives all the x and y information of

current, voltage and position

INSTALLER SOFTWARE

OUICK GUIDE

6b 6c 6d

9. Statistics

9a: Run/Stop: Gives an overview of the

travelled distance of the system’s

lifetime

9b: Error Reason: Gives an overview of the

number of errors in the system’s lifetime

9c: System Log: Gives an overview of the

last 10 errors and/or anti-collisions

10. Connect/Disconnect

10a: Disconnect: disconnect system

(might be useful in case the system is

not working properly)

INSTALLER SOFTWARE

OUICK GUIDE

Vogel’s Products BV

HONDSRUGLAAN 93,

5628 DB EINDHOVEN,

THE NETHERLANDS

T +31 (0)40 264 74 00

E inf[email protected]

W www.vogels.com

Table des matières

Autres manuels VOGELS Système de levage

VOGELS

VOGELS PPL 2500 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur