Vizualogic SDM107 Manuel utilisateur

SDM107

 Before operating the unit, please read these instructions carefully.

 Retain the manual for future reference.

 You are advised to follow the instructions carefully when operating the unit.

 Do not use any chemical solvent, clean agent or corrosive detergent to clean away dirt of the surface of the screen. By doing so,

you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend the use of a

soft damp lens cleaning cloth.

 Using spare parts from another manufacturer may cause permanent damage to the unit.

 When operating the display unit, avoid touching or pressing the LCD glass panel. Excessive force may cause irreparable damage to

the LCD screen.

 It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a screen that is located in the motor

vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the

vehicle. In the interesting of safety, this monitor should never be installed where it will be visible, directly or indirectly, by the operator

of the motor vehicle.

 Lock the LCD screen in the fully closed position when not in use.

 Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome

lights can drain the vehicle’s battery.

IMPORTANT NOTICE

SDM107

 FLIP DOWN 10.2” 16:9 WIDE SCREEN TFT-LCD MONITOR

 BUILT IN 1/4 DIN Full Function DVD Player

 BULIT IN USB 1.1 PORT

 BUILT IN WIRELESS HEADPHONE IR TRANSMITTER

 1 AUDIO/VIDEO INPUT

 1 AUDIO/VIDEO OUTPUT

 FULL FUNCTION WIRELESS REMOTE CONTROL

 (OSD) ON SCREEN DISPLAY FOR CONTROL OF PICTURE QUALITY AND FUNCTIONS

 DOME LIGHTS

MAIN SPECIFICATIONS

SDM185

DISPLAY:

10.2” wide screen TFT LCD active matrix 8.5” wide screen TFT LCD active matrix

RESOLUTION:

800RGB(W) X 480(H)

PIXEL PITCH(mm):

0.0925(W) X 0.2775(H)

VIEWING ANGLE:

Left/Right 130°, Up/Down 45°/65°

BRIGHTNESS:

250 NITS

CONTRAST RATIO:

300:1

POWER SOURCE:

DC 12V ( NEGATIVE GROUND)

POWER CONSUMPTION:

20W ( Max.)

OPERATING TEMPERATURE:

0℃~60℃ (32℉~140℉)

STORAGE TEMPERATURE:

-20℃~70℃(-4℉~158℉)

DIMENSIONS (W x D x H):

335x280x45 mm

NET WEIGHT:

3Kgs. (6.6lbs)

MAIN FEATURES

SDM107

DVD PLAYER

 Supports DVD, SVCD, VCD, AUDIO CD, and MP3 format.

MEDIA PLAYER

 Support USB 1.1 Drive.

 Equipped with USB Socket.

 Plays MP3 music.

 Applies to NTSC or PAL system.

STANDARD ACCESSORIES PACKAGE CONTENTS

 Remote control (CR2025 x 1 Lithium Battery)

 Operating manual

 Power connection cable

SDM107

DVD player

Dome lights

IR transmitter

 POWER button: Press to turn the monitor on/off.

 MENU button: Press menu button to active OSD feature and select OSD features.

 UP/DOWN buttons: Adjustment buttons.

 IR Sensor: IR sensor for remote control.

 Dome lights: Provide additional interior illumination.

 Dome lights switch: Press to loop OFF / ON / DOOR.

 USB port: Plays USB 1.1 Drive.

 IR transmitter: Transmit audio to wireless headphones.

 DVD player: Plays DVD, SVCD, VCD, AUDIO CD and MP3 format.

 A/V input jack: Connecting to your Game port or any A/V device.

CONTROLS & CONNECTORS

Dome lights switch

USB port

A/V input jack

Buttons

Panel lock

Eject Key

SDM107

MONITOR FUNCTION DESCRIPTIONS

1. MUTE button

Press to mute the audio, press the button again to restore

sound to the previous audio level.

2. MENU button

Press this button to active the OSD menu screen.

3. MENU Adjust Up button

4. MENU Adjust Down button

Use this button to change the value of the menu option.

5. VOLUME UP button

6. VOLUME DOWN button

Use this button to raise the volume level of the audio output.

7. SOURCE button

Press to enter the GAME input mode.

8. POWER button

Press this button to turn on the monitor, press again to turn off the monitor.

9. DVD button

Press DVD button to play DVD or change to USB Mode.

SDM107

DVD FUNCTION DESCRIPTONS

10. NUMBER buttons

Allows the user to enter the numbers 0 to 10 for selection of CD track,

DVD chapters, and password setting.

11. PBC button

Allows the user to select the subtitle when playing the VCD 2.0 version only.

12. TITLE button

Some DVDs come with title selection. For such case, allows the user to

select desired title.

13. SUBTITLE button

Allows the user to select a subtitle display in various languages.

14. BWD button

Allows the user to search in a backward direction.

15. UP button

16. FWD button

Allows the user to search in a forward direction.

17. LEFT button

18. PLAY button

Press this button to active the play mode while a disc is loaded into the disc compartment.

19. RIGHT button

20. PREVIOUS button

Allows the user to return to the previous chapter or track.

21. DOWN button

22. NEXT button

Allows the user to skip to the next chapter or track.

11 12 13

14 15 16

17 18 19

20 21 22

SDM107

23. STOP button

DVD disc play will be stopped.

24. PAUSE button

Allows the user to pause the playback.

25. ENTER button

Press this button to confirm selection.

26. EJECT button

Press this button to eject the DVD disc.

27. A-B button

Allows the user to repeat play of a DVD or CD from point A to point B.

Press button once to set point A once again to set point B.

28. REPEAT button

Allows the user to repeat play various positions of a DVD, CD or MP3.

(Track/Chapter/All).

29. SET UP button

Allows the user to select the DVD player’s options (Display, OSD language,

Defaults, Parental Control, Password, Exit Setup)

30. DISPLAY button

Press to display DVD disc current information.

31. ZOOM button`

Allows the user to zoom in or zoom out the image, press the

“LEFT/RIGHT/UP/DOWN” buttons to move the zoomed image to move

in the direction of the remaining portion of the image.

23 24 25

SDM107

USB 1.1 DRIVE FUNCTIONS DESCRIPTIONS

32. REPEAT button

Allows the user to repeat play.

33. SETUP button

Press to enter the SETUP MENU MAIN PAGE.

34. DISPLAY button

Press to display the Media Card current information.

35. ZOOM button

Allows the user to zoom in or zoom out the image, press the “LEFT/RIGHT

UP/DOWN” buttons to move the zoomed imaged to move in the direction of the

remaining portion of the image.

36. UP button

37. LEFT button

38. PLAY button

Press this button to start the play mode of the USB drive.

39. RIGHT button

40. DOWN button

41. STOP button

USB media file play will be stopped.

42. PAUSE button

Allows the user to pause the play of “MUSIC” or “VIDEO” file.

43. ENTER button

Press this button to confirm selection.

36~40

41 42 43

SDM107

MONITOR OPERATION

Slide the screen release lock forward will unlock the LCD screen and the LCD screen will drop down slightly. Pivot the screen downward

until a comfortable viewing angle is reached.

 Press the POWER button on the unit or remote to turn on the monitor.

 Press the SOURCE button to select viewing source.

 Press the MENU button to active the OSD menu shown on the LCD screen.

 Press the MENU button again to select the adjustment item, press the “▲” or “▼” button to enter the sub menu and adjust

function/value.

 “FM PRESET”: press the “▲” button to select M1 ~ M6; press “▼” button 1 sec. to change present FM channel or press “▼” button

more than 2 sec. to cover and save a new FM channel.

SDM107

OVERHEAD DOME LIGHTS

The lights are controlled by a bush button switch. Push the button to change “ON”  “DOOR”  “OFF” function by loop. The “ON”

function will turn the lights on. The “OFF” position will prevent the lights from turning on at all times, and the “DOOR” or “AUTO” position

will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in

the “ON” position, as this could result in a discharged battery.

DVD OPERATING

The DVD player has the ability to play DVD, VCD, Audio CD and MP3 audio. Make sure you read this section completely before using

the DVD section.

REGIONAL CODING

Both the DVD player and DVD disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t

match, the disc won’t play. This DVD player will only region 1 DVD disc.

TO PLAY A DVD OR VCD

 Press the DVD button on the remote control.

 Insert DVD or VCD disc (Label Up), the disc will automatically load.

 Press the “PLAY” button on the remote to play selected title.

NOTE: The On Screen Display will show “INVALID DISC” if the disc region code does not correspond with the unit setting.

 Press the “PAUSE” button to pause, press the “PLAY’ button to resume play.

 Press the “STOP” button to stop play.

Table des matières

Autres manuels Vizualogic Système vidéo embarqué

Vizualogic

Vizualogic VL9000 Series Manuel utilisateur

Vizualogic

Vizualogic HindSight F150 Manuel utilisateur

Vizualogic

Vizualogic Quantum Series Manuel utilisateur

Vizualogic

Vizualogic Ford Expedition Manuel utilisateur

Vizualogic

Vizualogic VL9000 Series Manuel utilisateur

Vizualogic

Vizualogic A-1000 Manuel utilisateur

Vizualogic

Vizualogic A 1150 Manuel utilisateur

Vizualogic

Vizualogic A-2000 Manuel utilisateur

Vizualogic

Vizualogic ELite Console Manuel utilisateur

Vizualogic

Vizualogic VL9000 Series Manuel utilisateur

Vizualogic

Vizualogic A-1000 Manuel utilisateur

Vizualogic

Vizualogic Quantum Series Manuel utilisateur

Vizualogic

Vizualogic Advantage Series Manuel utilisateur

Vizualogic

Vizualogic A-1000 Manuel utilisateur

Vizualogic

Vizualogic 2004 Manuel utilisateur

Vizualogic

Vizualogic HindSight Chevy Avalanche Manuel utilisateur

Vizualogic

Vizualogic Quantum Series Manuel utilisateur

Vizualogic

Vizualogic 9" Manuel utilisateur

Vizualogic

Vizualogic HindSight Hummer Manuel utilisateur

Vizualogic

Vizualogic HindSight Cadillac Escalade Manuel utilisateur

Vizualogic

Vizualogic VL8000 Series Manuel utilisateur

Vizualogic

Vizualogic VL8000 Series Manuel utilisateur

Vizualogic

Vizualogic Advantage Manuel utilisateur

Vizualogic

Vizualogic A-2000 Manuel utilisateur

Manuels Système vidéo embarqué populaires d'autres marques

Stinger

Stinger HEIGH10 RB10RAM13B Manuel utilisateur

Eonon

Eonon E1057 Manuel utilisateur

Milion

Milion D2223 Manuel utilisateur

Metra Electronics

Metra Electronics 99-8153 Manuel utilisateur

Voxx Electronics

Voxx Electronics HR8MA1 Manuel utilisateur

Axxera

Axxera AV604Bi Manuel utilisateur

Clarion

Clarion NX706E Manuel utilisateur

Pyle view

Pyle view PLDN74BTi Manuel utilisateur

Clarion

Clarion NX602 Manuel utilisateur

PowerAcoustik

PowerAcoustik PTID-5850N Manuel utilisateur

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Guide de l'utilisateur

Lanzar

Lanzar SVDVD5 Manuel utilisateur

Kia

Kia MTXM100YPPE Manuel utilisateur

Eonon

Eonon E1060 Manuel utilisateur

Macrom

Macrom M-AN900 Manuel utilisateur

Hyundai

Hyundai BAPE-L3000N Manuel utilisateur

r.LiNK

r.LiNK RL2-UCON8-SM Manuel utilisateur

Blaupunkt

Blaupunkt DVP 01C Manuel utilisateur