Vixen Horns OCTOPOD Manuel utilisateur

OCTOPOD™ (VXH8124XLB)

INSTALLATION GUIDE

PAGE 1 of 2

BEFORE BEGINNING YOUR INSTALLATION

Read through the whole instruction guide before getting started with the installation. Professional installation is

recommended for this product.

CONTENTS

Octo Trumpet Horn (Black)

12V Solenoid with Pre-installed Compression Fitting for 3/8” OD Hose

3/8” OD Air Line

Mounting Hardware

SAFETY INSTRUCTIONS

Avoid dismantling this horn’s electrical elements.

Avoid touching compressor components with your bare hands immediately after or during use.

Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.

Avoid reaching out to touch or pick up any fallen or water submerged parts.

Set the horn up for use only in areas with adequate ventilation.

Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.

Make sure your battery ground is detached before getting your installation started.

Employ equipment for eye protection during drill operations.

Ensure that your air system has no pressure before starting the installation.

The specific voltage requirement for this horn is 12 volt DC, therefore installation must be done to a DC power

source of 12 volts.

OCTOPOD™ (VXH8124XLB)

INSTALLATION GUIDE

PAGE 2 of 2

MOUNTING

Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of

the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive

shaking. Do not attach the horn to any plastic or other flexible material.

Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a

drill.

Use the provided mounting hardware to fasten the horn.

AIR LINE INSTALLATION

Using the provided 3/8" OD air line,

cut the size needed.

Push hose into the push to connect

TEE fitting located in the top of the

horn.

Connect the other end of the air line

to the fitting on your air supply.

If you need to disconnect the air line

from the solenoid pull away the air

line while pushing the plastic part of

the pneumatic fitting.

ELECTRICAL CONNECTIONS

Join one wire from one solenoid with one wire from the second solenoid, this will be the positive lead and

must be connected to the positive (+) terminal of the battery or alternator. WARNING: We highly recommend

that you use a 20A fuse (not provided) to assure that the circuit remains safe and will not be damaged by

excess current.

Join the remaining wire of one of the solenoids with the remaining wire of the second solenoid, this will be

your negative lead and must be connected to one of the terminals on the horn button.

Ground the other terminal on the horn button by wiring it to bare metal.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Vixen Horns Corne

Vixen Horns

Vixen Horns VXO8705/3118B Manuel utilisateur

Vixen Horns

Vixen Horns VXH3118 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8330B/1167B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8715/3311 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8210/4124C Manuel utilisateur

Vixen Horns

Vixen Horns VXH1168BX2 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8325B/4114B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8350/11642 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8210/4114B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8815/4124C Manuel utilisateur

Vixen Horns

Vixen Horns VXO8410/3311B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8315/4114B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8330BDP Manuel utilisateur

Vixen Horns

Vixen Horns VXO8210/3118 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8410/3114B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8805/3118 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8350B/3118B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8210/3311B2 Manuel

Vixen Horns

Vixen Horns VXO8705/4124B Manuel utilisateur

Vixen Horns

Vixen Horns VXH1264X2 Manuel utilisateur

Vixen Horns

Vixen Horns VXO4318B Manuel utilisateur

Vixen Horns

Vixen Horns VXS7910 Manuel utilisateur

Vixen Horns

Vixen Horns VXO8705/4114B Manuel utilisateur

Vixen Horns

Vixen Horns VXO8330APRO/4124XC Manuel utilisateur

Manuels Corne populaires d'autres marques

Elk Products

Elk Products 45 Manuel utilisateur

Valcom

Valcom V-1050C Manuel utilisateur

Cooper Wheelock

Cooper Wheelock DB3 Series Manuel utilisateur

Altec Lansing

Altec Lansing 811B HF HORN Manuel utilisateur

RF Elements

RF Elements UltraHorn CC Series Manuel utilisateur

Edwards Signaling

Edwards Signaling 869DSTR-G1 Series Instructions de montage

Valcom

Valcom V-1030C Manuel utilisateur

Valcom

Valcom VIP-130AL-SA Manuel utilisateur

Electro-Voice

Electro-Voice HPT94 Manuel utilisateur

Toa

Toa LE-M124 Manuel utilisateur

EAW

EAW MR-102B Manuel utilisateur

AUSTRALIAN MONITOR

AUSTRALIAN MONITOR MH30 Manuel utilisateur

Pequod

Pequod TWISTER 3.1 Manuel utilisateur

United Pacific

United Pacific 46151 Manuel utilisateur

Wolo

Wolo OCEAN ALERT 170 Manuel utilisateur

Altec

Altec 151A PAGING HORN Manuel utilisateur

aidapt

aidapt VM953 Manuel de programmation

Valcom

Valcom V-1069 Manuel utilisateur