Vivotek CC8130 Manuel utilisateur
1MP • Stylish Design • Panoramic View
All specications are subject to change without notice.
Copyright 2013 VIVOTEK INC. All rights reserved.
c
P/N:625022000G Rev. 1.0
Quick Installation Guide
CC8130
Compact Cube
Network Camera
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T:+886-2-82455282|F:+886-2-82455532|E:[email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298|E: [email protected]
English 繁中 日本語 Español Português
簡中 Français Deutsch Italiano Türkçe Polski Русский Česky Svenska
Dansk
Nederlands Indonesia
VIVOTEK Netherlands B.V.
Busplein 36, 1315KV, Almere, The Netherlands
|T:+31 (0)36 5389 149|F:+31 (0)36 5389 111|E:[email protected]
Power off the Network Camera as soon as smoke or
unusual odors are detected.
Do not place the Network Camera on unsteady
surfaces.
Do not insert sharp or tiny objects into the Network
Camera.
CC8130
Quick Installation Guide / Warranty Card
Keep the Network Camera away from water. If
the Network Camera becomes wet, power off
immediately.
Do not touch the Network Camera during a
lightning storm.
Do not place the Network Camera in high humidity
environments.
Screws / Mount bracket
Software CD
Warning Before Installation
1. Package Contents
Reset button
Microphone
Lens
LED
RJ-45 release
button
Camera bracket
2. Physical Description
Outer View
EN - 2
1.6~1.8m
3m
2m
Camera View Coverage
The camera is designed to capture human activities in
a near-hemispheric field of view, at a place such as a
cashier or bank counter. Due to the optical characteristics
of wide-angle lens, image quality decreases as distance
from an object increases. It is therefore recommended to
install the camera within 3 meters or closer to the objects
of your interest. The focus center should also be aligned
with objects of importance, say, human faces.
Installation Concern
Vertical:
100º Horizontal:
180º
Recognition
Perception
Top View
Side View
3. Considerations
15°tilt bracket
EN - 3
English
Round cable Flat cable
4. Hardware Installation
Connecting Ethernet Cable
1. Insert your Ethernet cable through the
opening at the bottom of the camera
bracket.
2. If using a round cable: When the RJ-45
plug is fully inserted, use the round-
head screw with a washer to secure its
position from the bottom of the bracket.
If using a flat cable: Pass the cable
through the opening and attach to
camera.
Strain relief boot
Record the MAC address before installing the
camera.
It is recommended to use an Ethernet cable that
comes without the strain relief boot. You can remove
the boot if your cable comes with one.
To detach a camera, remove the retention screw
from the bottom, and insert a straightened paperclip
into the release button to press on the RJ-45 locking
tab.
IMPORTANT:
NOTE:
NOTE:
EN - 4
Mounting the Network Camera - Wall Mount
1. You can install the camera to a vertical surface by driving screws through the holes shown below.
2. You may also install the bracket to a 4” x 2” utility box (as outlet or switch socket).
3. Another option is using the 15°tilt bracket so that the camera can be installed to an over-looking
position. Attach the bracket to a utility box, and then secure the mount bracket. You can route the
cable through the hole in the middle.
12 3
45
4. Attach a rubber seal pad to the bottom of the mount bracket.
5. Install the camera. Make sure the RJ-45 connector is properly connected.
15°tilt bracket
EN - 5
English
POWER C
OLLIS
ION
LINK
RECEIVE
PARTITION
12345
Power over Ethernet (PoE)
POWER C
OLLIS
ION
LINK
RE
CEIVE
PARTITION
12345
PoE Switch
Non-PoE Switch
PoE Power Injector
(optional)
When using a PoE-enabled switch
This Network Camera is PoE-compliant, allowing transmission of power and data via a single
Ethernet cable. Follow the below illustration to connect the camera to a PoE-enabled switch via an
Ethernet cable.
When using a non-PoE switch
Use a PoE power injector (optional) to connect between the Network Camera and a non-PoE switch.
5. Network Deployment
EN - 6
1. Install “Installation Wizard 2” from the Software Utility directory on
the software CD.
2. The program will conduct an analysis of your network
environment. After your network is analyzed, please click on the
“Next” button to continue the program.
3. The program will search for VIVOTEK Video Receivers, Video
Servers, and Network Cameras on the same LAN.
4. After a brief search, the main installer window will pop up.
Double-click on the MAC address that matches the one printed
on the camera label or the S/N number on the package box
label to open a browser management session with the Network
Camera.
0002D10766AD
172.16.7.13 PZ71X2
CC8130
For further setup, please refer to the user's manual on
the software CD.
1. A browser session with the Network Camera should
prompt as shown below.
2. You should be able to see live video from your
camera. You may also install the 32-channel
recording software from the software CD in a
deployment consisting of multiple cameras. For
its installation details, please refer to its related
documents.
6. Assigning an IP Address
7. Ready to Use
1MP • Stylish Design • Panoramic View
All specications are subject to change without notice.
Copyright 2013 VIVOTEK INC. All rights reserved.
c
P/N:625022000G Rev. 1.0
Quick Installation Guide
CC8130
Compact Cube
Network Camera
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T:+886-2-82455282|F:+886-2-82455532|E:[email protected]
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298|E: [email protected]
English 繁中 日本語 Español Português
簡中 Français Deutsch Italiano Türkçe Polski Русский Česky Svenska
Dansk
Nederlands Indonesia
VIVOTEK Netherlands B.V.
Busplein 36, 1315KV, Almere, The Netherlands
|T:+31 (0)36 5389 149|F:+31 (0)36 5389 111|E:[email protected]
Autres manuels pour CC8130
7
Table des matières
Autres manuels Vivotek Caméra de sécurité
Vivotek
Vivotek IP7160 Manuel utilisateur
Vivotek
Vivotek TD5328-VF2 Manuel utilisateur
Vivotek
Vivotek IP8361 Manuel utilisateur
Vivotek
Vivotek FD816B-HF2 Manuel utilisateur
Vivotek
Vivotek IP8331 Manuel utilisateur
Vivotek
Vivotek IP8362 Manuel utilisateur
Vivotek
Vivotek PT3113 Manuel utilisateur
Vivotek
Vivotek IP7160 Manuel utilisateur
Vivotek
Vivotek IP7142 Manuel utilisateur
Vivotek
Vivotek PZ7151 Manuel utilisateur
Vivotek
Vivotek PT3112/3122 Manuel utilisateur
Vivotek
Vivotek IP8160-W Manuel utilisateur
Vivotek
Vivotek IP8330 Manuel utilisateur
Vivotek
Vivotek IP7133 Manuel de l'opérateur
Vivotek
Vivotek IP8335H Manuel utilisateur
Vivotek
Vivotek FD8151V Manuel utilisateur
Vivotek
Vivotek SD8333-E Manuel utilisateur
Vivotek
Vivotek Supreme IP8151 Manuel utilisateur
Vivotek
Vivotek PZ8111 Manuel utilisateur
Vivotek
Vivotek SUPREME MD8565-N Manuel utilisateur
