Vivid Matrix MX-370P Fiche technique
Page | 1
Product instruction manual
Matrix MX-370/530P, MX-370/530DP & MX-370MP
Laminating Systems.
Page | 2
Contents
Page 3 – Introduction
Page 4 – Specifications
Page 5 – Safety instructions and Environmental requirements
Page 6 – Control panel display screen for single sided laminating
Page 7 – Control panel display screen for foiling mode on models Pneumatic and Metallic.
Page 8 – Control panel display screen for the model Duplex
Page 9-12 – Set up of lamination films
Page 13-14 – Set up of foils
Page 15-18 – Double sided lamination
Page 19 – Encapsulation
Page 20-22 – Trouble shooting
Page 23 - Handy hints for foiling
Page 24 – Warranty, incorrect use and manufacturers address
Page | 3
Introduction
Thank you for purchasing the Matrix laminator
The Matrix system is a high-performance laminating & foiling system with a solid construction built to last.
Please read these instructions carefully before starting to use the system to ensure you get the best results and are competent at
operation.
Should you experience any issues with your system please contact us and we will be happy to help.
Telephone Number:0345 130 4050
Email: Sales@vivid-online.com
Swing out multilingual control panel Pneumatic control unit
Film/Foil mandrel
Steel laminating roller Take up unit
Anti-curl device
Feed Table Collection tray
Duplex bottom film mandrel
Optional integrated silent compressor
Foot pedal socket
Omni-flow Feeder connection
Page | 4
Specifications
Specifications
MX-370P &
MX-370MP
MX-530P
Max. Mechanical Speed (m/ft/min)
10m/33ft
10m/33ft
Max. Lamination Film Width (mm/inches)
340mm/13”
500mm/20”
Minimum Paper Thickness (gsm/lbs)
135gsm/90lbs
135gsm/90lbs
Maximum Sheet Width (mm/inches)
420mm/17”
550mm/22”
Warm-up Time (mins)
10
10
Temperature Range (ºC/ ºF)
0-140 /32-284ºF
0-140ºC/32-284ºF
Power Supply (V)
220/240
220/240
Power Supply Required (Amps)
13
13
Power Consumption (W)
2200
2400
System Fuse Rating (Amps)
8
8
Overall Dimensions - Width (mm/inches)
800mm/31”
900mm/35”
Overall Dim. - Depth x Height (mm/inches)
1800x1400/71x55”
2050x1400/81x55”
Gross Machine Weight (kg/lbs)
280kg/617lbs
320kg/705lbs
Warranty
1 year
1 year
Specifications
MX-370DP
MX-530DP
Max. Mechanical Speed (m/ft/min)
10m/33ft
10m/33ft
Max. Lamination Film Width (mm/inches)
340mm/13”
500mm/20”
Minimum Paper Thickness (gsm/lbs)
135gsm/90lbs
135gsm/90lbs
Maximum Sheet Width (mm/inches)
420mm/17”
550mm/22”
Warm-up Time (mins)
10
10
Temperature Range (ºC/ ºF)
0-140 /32-284ºF
0-140ºC/32-284ºF
Power Supply (V)
220/240
220/240
Power Supply Required (Amps)
32
32
Power Consumption (W)
4500
4500
System Fuse Rating (Amps)
8
8
Overall Dimensions - Width (mm/inches)
800mm/31”
900mm/35”
Overall Dim. - Depth x Height (mm/inches)
1800x1400/71x55”
2050x1400/81x55”
Gross Machine Weight (kg/lbs)
285kg/628lbs
340kg/750lbs
Warranty
1 year
1 year
If you are using your own air supply, please note the following:
Page | 5
Safety Instructions
v Please ensure that the voltages and phase of the power supply you are using match with the rated working voltages before
operating the system.
v The power supply should be close to the system for convenient use.
v The power supply should provide a reliable protective earthing connection.
v This system must be earthed reliably as to ensure the safety of the system during operation.
v Only the operators of this system should operate the electrical or mechanical components/controls.
v Please don’t use damaged wires or sockets.
v Please keep children away from touching or operating this system.
v Please do not spray any liquids or cleaning products directly onto the system, this can cause a machine fault or electrical
shock.
v During use please take care that no clothes, neckties, hair or jewellery etc are not overhanging near the system otherwise
injuries can occur.
v Please don’t put burrs, sharp blades or thick rigid materials on, into or near any component especially rubber parts to
avoid damage.
v Please shut down the system after laminating/foiling to avoid misuse.
v At the end of each laminating /foiling job or the end of the working day always gape (lift up) the pneumatic rollers to
avoid flat spots and distortions of the rubber.
v If the system needs to be moved, please turn of the power to the system and unplug from the socket.
v Please be aware of the location of the wheels while moving the system as to avoid damage to any cables nearby and
personal injuries.
v Always ensure the system is positioned on a flat and level floor.
v Please be cautious of the foot pedal and cable position when operating or moving the system.
v Only set the temperature to 80oC when first switched on as the temperature is designed to overshoot to maintain the heat
on the first run.
Environmental Requirements
v Ambient room temperature 10oC – 60oC / 50oF – 140OF, humidity 30% - 80%, ideal humidity 55%.
v Do not place the system below air conditioning units, drafts, external doorways and windows as this can affect the
accuracy of the temperature sensors.
v Due to the static adherence of the film, you should keep the environment clean from dust. A dust cover is provided with
the system.
v Please do not keep the system in direct sunlight.
v Enough space should be kept around the system to ensure safe operation. The minimum holding areas are 2.5m x 3m/8ft
x 10ft.
Page | 6
The Control Panel -
Single-sided Lamination
Display Screen Function/Settings Key 5 Memory Keys
Temperature
Settings
Paper Length
Settings Screen
Brightness
Speed Dial
Stop Key
Fine Tuning Key for Cutting/ Anti-Curl Setting Forward Key Foot Pedal Forward Foot Pedal Reverse
Splitting Position
Set
Temperature
Running Speed
Sheet
Counter
Guard Latch in Place
Sheet Length
Forward/Foot
Pedal Mode
Screen
Brightness
Sheet Splitting/Cutting Adjustment Anti-Curl (0-5) Paper Sensor Actual Temperature
Page | 7
The Control Panel–
Foiling Mode for Pneumatic & Metallic Models
Press the function/settings key
Use the temperature buttons to select mode
Press stop to enter mode
This symbol appears when in the foiling mode
Page | 8
The Control Panel –
Duplex Models
Single sided mode
As explained on previous page press the function/settings key
to enter screen, use the temperature buttons to select mode and
press stop to enter.
Double sided mode
Encapsulating/foiling mode
Ensure for foiling the bottom temperature is set to zero (off).
Page | 9
Single-sided Laminating
1. Turn the power on. 2. Set paper length (exclude the desired overlap i.e. 450gsm = 445mm) and set
temperature to 80oC.
3. Remove film mandrel off the system and loosen the core collar using the blue 5mm Allen key provided (3.3)
4. Slide film onto the mandrel and centralize (4.1). Replace the core adaptor and tighten. Place the mandrel back onto the system
and tighten the mandrel lock (4.3).
5. Ensure the film feeds from the bottom (5.1) of the roll and mechanical anti-curl is set to zero (5.2). Remove safety guard (5.3).
3.2
3.3
4.3
1.1
2.1
3.1
4.1
4.2
5.1
5.2
5.3
Duplex Pneumatic/Metallic
Page | 10
6. Place a plain thick (i.e.300gsm) card into the back of the machine (6.1) taking care to go the middle of every roller (6.2) until
reaching the feed gate (6.3), then place another plain card and cover the top laminating roller (6.4).
7. If you have a metallic model, please ensure the two idle bars are used (7.1). Holding the corners of the film (7.2), thread under
the patterned idle bar (7.3) and place back onto the film roll (7.4). Remove the card covering the roller (7.5). Now is the time to
clean the roller if there is any glue or marks. For a chrome roller we recommend using Amberklene ME-20 heavy duty solvent
(7.6) and for rubber rollers use the Amberclens anti-static foaming cleaner (7.7). When using the cleaner please spray into a
cloth/paper towel away from the machine, then apply to the roller.
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
7.5
7.6
7.7
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Vivid Plastifieuse
