Operation Instructions
1. Plug into a power socket.
2. Press the “Switch” button to power up.
3. Set up massage by pushing the desired setting.
4. Turn off machine.
The massager will automatically shut off after 5 minutes after the massage is finished. During a massage,
press the “Switch” button to halt the machine. After 10 minutes of halt, the machine will automatically shut
off. Holding down the “switch” button will also shut off the massager.
Note: NEVER pull out the plug directly during the massage. Unplug the power cord once the massager
has shut down.
CLEANING AND MAINTENANCE
•Storage temperature: +15C - +85C
•Unplug power cord prior to cleaning the massage machine.
•Do not use petrol, thinner, or other corrosive solvents.
•Do not clean with a wet cloth or with alcohol. Use a dry cotton cloth.
•If the machine will not be used for a long time, roll up the massager power cord and store in a clean, dry
environment.
•Do not store equipment in high temperatures, open flame or direct sunlight.
•Use the equipment in light, avoid any strong impact.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA
or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is a fuse cover fitted,
this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be
used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or
office are not suitable for this product’s plug, the plug must be removed and disposed of safely. Attempts to
insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
