Vitec Multimedia Litepanels Apollo Manuel utilisateur

1Dual-band 2.4GHz and 5GHz Antennas sends and receives sACN Wi-Fi

transmission

2Long LumenRadio CRMX Antenna transmits wireless DMX to CRMX

receivers

3Link/Unlink CRMX press to link CRMX to receivers. Hold 3+ secs to unlink

all receivers

4CRMX Indicator LEDs display CRMX mode, status and data

5sACN Indicator LED displays status of sACN network and network ports

6Corner System Indicator LEDs displays device system status

7Reset Pinhole Button press to reboot or hold for 3 seconds to reset to

factory default settings

8LAN RJ45 Port connect to sACN Local Area Network devices such as

a lighting console

9WAN RJ45 Port connect to Wide Area Networks, such as the internet

10 USB 3 Port for use with future features and accessories

11 5-Pin DMX In/Out connect to hard-wired DMX controlled xtures or to a

DMX lighting board. Defaults to output

12 USB-C Power Port connect from 9V+ USB-C power supply or battery

345

8910 11 12

345

8910 11 12

Front View Rear View

Connecting Control Device To Apollo Bridge

1. Connect power to the bridge. USB-C Power Port, connect from

9V+ SUB-C power supply or battery (12).

2. Connect control device to the Apollo Bridge Wi-Fi network.

3. Enter the default password found on the bottom of the Apollo

Bridge.

4. Conrm control software is set to transmit sACN.

Lighticians Apollo Control automatically streams sACN.

5. To congure advanced network settings such as SSID, Network

Password, Wi Band, IP Address, DMX Universe # and ins/outs

enter Apollo Bridge IP address into web browser URL bar on

connected device.

Note! Default IP address is found on the bottom of the Apollo Bridge.

Linking A LumenRadio CRMX Receiver To Apollo

Bridge

1. Set DMX start address and control mode of lighting xture before

connecting.

2. Connect hard-wired lighting xtures via the 5 pin XLR I/O (11).

3. Unlink CRMX receiver to reset before connecting to Apollo Bridge.

4. Press LINK CRMX button on Apollo Bridge (3).

5. After a few seconds the green ‘linked’ light will turn on, conrming

receiver is linked.

Problems and Solutions

Problem: Cannot link CRMX Receiver to the Apollo Bridge.

Solution: Unlinking CRMX receiver before linking to Apollo resets and

erases previous connections that could interfer with current

connection. Receiver must always be within range of Apollo.

Problem: Periodically losing connection to the Apollo Wi-Fi Network or the

lights stop responding.

Solution: From the control smartphone or tablet, turn auto join o󰀨, on any

other commonly used area Wi-Fi networks, turn cellular date o󰀨

and make sure control device is within range of Apollo Bridge.

Problem: The light ickers or responds to commands in a way that does

not match chosen prole.

Solution: Conrm the light is set to the correct DMX start address, control

mode, bitrate (8 or 16) and rmware version. If everything is

correct, press and hold a pin into the factory reset pinhole (7) for

10 seconds.

Problem: Poor wireless performance; in an especially challenging RF

environment:

Solution: Ensure there is a clear and direct LINE OF SIGHT between

Apollo Bridge and connected wireless devices. Arrange external

antennas from connected devices on the same plane. Separate

Apollo from radio device antennas of other networks as much as

possible. Avoid scenarios where glass, metal caging, liquid or large

groups of people are in between connected wireless devices.

Problem: The Apollo Bridge and light(s) still won’t function properly.

Solution: Press a pin into factory reset pinhole (7) for 3 seconds.

APOLLO BRIDGE BASIC WIRELESS SETUP

For additional CRMX transmitter settings,

download the free CRMX Toolbox app from the

app store, scan the QR code with your iPhone or

iPad to install the app.

Quick Start Guide

Apollo Wireless DMX Bridge

Download the free CRMX Toolbox app

Download the “free Lighticians

Apollo Control App”

To control all of your Litepanels lights

and other lighting xtures in your kit,

scan the QR code with your iPhone

or iPad to install the app.

*This product contains software licensed under various free software

licenses, please refer to the “License Notices” section in Apollo’s integrated

web based control portal for more information.

HOW TO CONFIGURE A GEMINI WITH WDMX DONGLE

FOR APOLLO

1. Power on Gemini and insert Wireless DMX Dongle. Green light on

dongle will turn on when inserted correctly.

2. Select SETTINGS > IN/OUT SELECT > WIRELESS DMX IN on

Gemini.

3. Select DMX RESOLUTION > 8 BIT or 16 BIT.

Note! Make sure Gemini prole patched into control software or console

corresponds with selections.

4. Choose Starting DMX ADDRESS.

5. Select WIRELESS DMX > UNLINK *this resets the dongle from

previous connections.

6. Select WIRELESS DMX > LINK. And rmly press ‘LINK CRMX”

button (3) on APOLLO BRIDGE.

7. Wireless bars turn green on Gemini menu when link is successful.

Note! If using Gemini 2X1 these two additional steps are required when

setting up the xture.

8. Select DMX VERSION > DMX SETTINGS > DMX VERSION > VER

1 (ORIGINAL).

9. Select DMX MODE CONTROL > ENABLE.

HOW TO CONFIGURE AN ASTRA WITH WDMX

MODULE FOR APOLLO

1. Insert Wireless DMX module into Astra and power on.

2. Select SETTINGS > DMX SETTINGS > DMX ADDRESS > select

starting DMX address.

3. Select SETTINGS > DMX SETTINGS > WIRELESS DMX > SET

RADIO ON.

4. Select WIRELESS DMX > UNLINK RADIO *this resets the dongle

from previous connections.

5. Select WIRELESS DMX > LINK. And rmly press ‘LINK CRMX”

button (3) APOLLO BRIDGE.

6. Wireless bars turn green on Gemini menu when link is successful.

PATCHING/PROGRAMMING A GEMINI OR ASTRA IN

THE LIGHTICIANS APOLLO CONTROL APP

1. Open the Lighticians Apollo App.

2. Tap (+ PROJECT), enter project name and tap (+ PROJECT).

3. Tap project to add lights.

4. Within library tap xture type to patch and tap prole for desired

control mode.

Note! ‘RGBAW 8-bit’ is the optimized control mode for GEMINI xtures for

full control of CCT, HSI, RGBWW and Gels.

5. Enter desired name, DMX START ADDRESS and ID # number, color

ID and icon.

6. Scroll down and tap PATCH.

7. After patching, tap CONTROL on bottom of the screen, tap light and

start creating lighting.

Note! If the inner circle of the color wheel is black tap the saturation

spinner in the center of the color wheel to activate light’s control.

8. Reference the Lighticians Apollo Control APP Tutorial Guide for more

information regarding other app features.

CONNECTING TO LITEPANELS FIXTURES

Safety

Humidity and Condensation! Risk of electric shock

and re.

CAUTION! Never expose the product to rain or moisture as

condensed moisture may damage the product electrically

when switched on

CAUTION! Never cover the Apollo Wireless DMX Bridge

during operation. Keep a minimum clearance of 4 inches

around the housing for ventilation and air circulation

CAUTION! Avoid direct illumination by other luminaries or

other heat sources. Check the mains cable and connector

cable prior to every operation for damage.

!WARNING! In case of visible damage to the mains cable or

the housing, the device must not be operated any longer.

Damaged components must be replaced by a Litepanels

service center.

www.litepanels.com

FCC statement

Note: This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a res-

idential installation. This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du

Canada. CAN ICES-3 (A)/NMB-3(A)

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

EU Declaration of Conformity

This product complies with the following EU Directives:

2014/30/EU (EMC

2014/53/EU (RED)

2014/45/EU (LVD)

2015/863/EU (RoHS3)

Conforms to the Following Standards:

EN 55032:2015/AC:2016-07 (EMC)

EN 55035:2017 (ESD and Immunity)

EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1, EN 301 489-17 V3.1.1 (RED)

EN 62368-1:2014+A11:2017 (LVD)

EN 63000:2018 (RoHS)

A copy of the Declaration of Conformity is available on request.

Note! To download the Operating Manual:

Visit https://www.litepanels.com/en/prod-

ucts/apollo/

Publication No. 1.0

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur