VisuNet XT-9700 Manuel utilisateur

VisuNet XT

9700 Series

PROCESS AUTOMATION

USER MANUAL

With regard to the supply of products, the current issue of the following document is ap-

plicable: The General Terms of Delivery for Products and Services of the Electrical Indu-

stry, published by the Central Association of the Electrical Industry (Zentralverband

Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most recent version as well as the

supplementary clause: "Expanded reservation of proprietorship"

VisuNet XT 9700 Series

1 Safety ....................................................................................... 5

1.1 Validity .............................................................................................. 5

1.2 Symbols Used ................................................................................. 5

1.3 Target Group/Personnel ................................................................. 5

1.4 Reference Documentation .............................................................. 5

1.5 Delivery, Transport, and Storage ................................................... 6

1.6 Marking ............................................................................................ 6

1.7 Intended Use ................................................................................... 6

1.8 Warnings and Cautions .................................................................. 7

1.9 Disposal ........................................................................................... 7

2 Introduction ............................................................................. 9

2.1 Certification ..................................................................................... 9

3 Product Description ............................................................. 11

3.1 General Overview .......................................................................... 11

3.2 Component Overview ................................................................... 12

3.3 Specifications ................................................................................ 14

3.4 Agency Markings, Standards, and Certifications ...................... 15

3.4.1 UL ............................................................................................... 15

3.4.2 ATEX ........................................................................................... 16

3.4.3 IEC and IECEX ............................................................................ 16

3.4.4 FCC ............................................................................................ 17

4 Hardware Installation ........................................................... 19

4.1 General Warnings .......................................................................... 19

4.2 Mounting the VisuNet XT .............................................................. 19

4.2.1 Selecting a Mounting Location .................................................... 19

4.2.2 Mounting Options ........................................................................ 19

VisuNet XT 9700 Series

5 Connectors and Cabling ...................................................... 27

5.1 Junction Box .................................................................................. 27

5.1.1 With Quick Disconnects and Cable Glands ................................. 27

5.1.2 With Cable Glands ...................................................................... 28

5.1.3 Removing the Junction Box ......................................................... 28

5.1.4 Routing Cables Through the Junction Box .................................. 28

5.1.5 Installing the Junction Box ........................................................... 28

5.2 I/O Plates ........................................................................................ 29

5.2.1 X1 - Power ................................................................................... 30

5.2.2 X2 - USB 2.0 (x2) ........................................................................ 31

5.2.3 Rear non-incendive/intrinsically safe USB (optional) ................... 31

5.2.4 X3 - Serial Port (RS232) .............................................................. 31

5.2.5 X4 - Digital In/Out (I/O) ................................................................ 31

5.2.6 X5 - Serial Port (RS485) .............................................................. 32

5.2.7 X6 - Audio In/Out (I/O) ................................................................. 32

5.2.8 X7 - VGA ..................................................................................... 32

5.2.9 X8 - LAN ...................................................................................... 32

5.2.10 X9 - LAN/Fiber ............................................................................. 33

5.2.11 Fuses ........................................................................................... 34

5.2.12 Blanking Plugs ............................................................................. 34

5.2.13 Front non-incendive/intrinsically safe USB (optional) ................... 35

5.3 External Grounding ....................................................................... 35

5.4 SD Card Reader Option ................................................................. 36

6 Calibration and Operation ................................................... 37

6.1 Touch Screen Interface ................................................................. 37

6.1.1 Introduction ................................................................................. 37

6.1.2 Touch Screen Calibration ............................................................ 37

6.2 Membrane Keypads ....................................................................... 39

6.2.1 System Power Up with Heaters ................................................... 40

6.2.2 Keypad Disable ............................................................... /Enable 40

6.2.3 Heater Fault ................................................................................. 41

6.2.4 Computer Fault ............................................................................ 41

6.3 LED Quick Reference Guide ......................................................... 42

VisuNet XT 9700 Series

7 Field Maintenance and Repair ............................................. 43

7.1 Inspection ...................................................................................... 43

7.2 Field Serviceable Components ................................................... 43

7.2.1 AC Power Supply Removal and Replacement

7.2.2 DC Power Supply Removal and Replacement ............................ 48

7.2.3 Solid-State Drive (SSD) Removal and Replacement

7.2.4 Fuse Replacement ...................................................................... 56

8 Replacement Parts ............................................................... 57

8.1 I/O Panel Connectors .................................................................... 57

8.2 Fuses .............................................................................................. 57

8.3 Solid State Drive (SSD) ................................................................. 57

8.4 Power Supply ................................................................................. 57

9 Appendix ............................................................................... 59

9.1 Factory Restore Guide .................................................................. 59

9.1.1 Method A .................................................................................... 59

9.1.2 Method B .................................................................................... 64

9.2 Digital I/O Setting .......................................................................... 68

10 Glossary ................................................................................ 77

VisuNet XT 9700 Series

THIS PAGE IS INTENTIONALLY LEFT BLANK

VisuNet XT 9700 Series

Safety

VisuNet XT 9700 Series

1Safety

1.1 Validity

This document contains information that you must read for your own personal safety and to

avoid property damage. Depending on the hazard category, the warning signs are displayed in

descending order as follows:

1.2 Symbols Used

Safety Symbols

Informative Symbols

Action

This symbol indicates a paragraph with instructions.

1.3 Target Group/Personnel

The system operator is responsible for planning, mounting, commissioning, operating, and

maintenance.

Assembly, commissioning, operation, maintenance, and disassembly of any device must be

performed by trained, qualified personnel only. The instruction manual must be read and

understood.

1.4 Reference Documentation

Laws, standards, or directives applicable to the intended use must be observed. In relation to

hazardous areas, Directive 1999/92/EC must be observed.

The corresponding data sheets, Declarations of Conformity, EC type-examination certificates,

certificates and control drawings, if applicable (see data sheet), are an integral part of this

document. This information can be found at www.pepperl-fuchs.com.

Due to constant revisions, this documentation is subject to continual change. Please refer only

to the most up-to-date version at www.pepperl-fuchs.com.

Danger!

Danger notices emphasize that hazardous conditions may exist in the equipment, or may be

associated with its use. Failure to comply with danger notices may result in serious personal

injury or death.

Warning!

Warning notices indicate a warning about a possible fault or danger.

Failure to comply with warning may result in personal injury or equipment damage.

Caution!

Caution notices indicate a warning about a possible fault.

Ignoring the devices and any connected facilities or systems may cause interruption, or

complete failure of components or the entire system.

Note!

Notes call attention to information that is especially significant to understanding or operating

the diagnostic module.

VisuNet XT 9700 SEries

VisuNet XT 9700 Series

Safety

1.5 Delivery, Transport, and Storage

Check the packaging and contents for damage. Inform the shipper and contact the supplier if

any damage is found.

Make sure the item received is the correct item ordered. Contact Pepperl+Fuchs with

questions or concerns.

Keep the original packaging. Always store and transport the device in the original packaging.

Always store the device in a clean and dry environment. The permitted storage temperature

(see data sheet) must be considered.

1.6 Marking

Examine the model number nameplate to identify the appropriate approvals, area

classification, and type, as shown in Figure 1.1.

Figure 1.1 XT Identification Labels: Zone 2 only ("L2") and

Dual rated Zone 2 & Class I/Div 2 ("W3")

1.7 Intended Use

The device is only approved for appropriate and intended use. Ignoring these instructions will

void any warranty and absolve the manufacturer from any liability.

The device must only be operated in the ambient temperature range and at the relative

humidity (non-condensing) specified.

Connect interfaces using shielded cables ONLY.

The lead data cable and power circuit line must be in separate cable channels.

Check all cables and connectors before commissioning the system.

Wiring methods must be done in accordance with the authority having local jurisdiction.

Protection of the operating personnel and the overall system is not ensured if the product is not

being used according to its intended purpose.

Never expose LCD screen to direct sunlight. Always use protective sun shield.

VisuNet XT 9700 Series

Safety

VisuNet XT 9700 Series

For installations in a Restricted Access Location or equivalent, the user must comply with the

Restricted Access Location requirements of UL60950-1.

1.8 Warnings and Cautions

When so labeled, this equipment is suitable for use in Class I/Div 2, Groups A, B, C and D,

Class I/Zone 2, ATEX/IEC-Ex Zone 2 or non-hazardous locations only. Please consult local

electrical codes for hazardous location installation guidelines.

Power, input and output (I/O) wiring must be in accordance with Class I/Division 2 wiring

methods [Article 501.4(B) of the National Electrical Code, NFPA 70] and in accordance with

the authority having jurisdiction. The cabinet for installations in Division 2 must be suitable for

Division 2 wiring.

The Declaration of Conformity, Certificate of Compliance, and the data sheets are considered

an integral part of this user manual. The data sheets contain the electrical data of the

Declaration of Conformity and the Certificate of Compliance. Laws and/or regulations

governing the use or intended use must be observed.

1.9 Disposal

Disposing of devices, packaging material, and possibly contained batteries must be in

compliance with the applicable laws and guidelines of the respective country.

Warning!

EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN

SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.

Warning!

EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY

FOR CLASS I / ZONE 2.

Warning!

EXPLOSION HAZARD - DO NOT OPEN OR REPAIR UNIT WHILE POWER IS CONNECTED.

Warning!

EXPLOSION HAZARD - ALL UNUSED CABLE GLANDS MUST HAVE A PROTECTIVE

BLANKING PLUG IN PLACE. Refer to Section 5.2.12.

VisuNet XT 9700 SEries

VisuNet XT 9700 Series

Safety

THIS PAGE IS INTENTIONALLY LEFT BLANK

Table des matières

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur