Vista VK2-REC04HDW Manuel utilisateur

VK2-REC04HDW

Wireless Network Video Recorder

Quick Start Guide

Version 1.2 –Sept 2013

Vista VK2-REC04HDW Quick Start Guide

1. Hardware Overview

This installation guide provides detailed information and instructions for the VK2-REC04HDW Network Video

Recorder.

• Front View

• Right Side View

• Left Side View

REC LED : Emitting during recording

Power LED : See ** below

Power On/Standby button

Network LED : Emitting when Ethernet cable connected

** Power status

Red : Standby state

Orange : In booting progress

Green : Normal state

Sata hard disc drive

Extra Sata connector : To expand hard disc drive

adding to installed drive inside

1 USB Port : To connect external hard disk

drives for data backup.

Vista VK2-REC04HDW Quick Start Guide

• Rear View

** Only working with wireless antennas

- NO Devices

- DC 30V 1A max

- AC 125V 0.5A max

8 Ports Alarm Output

- NC/NO Devices selectable

- TTL Level Input

8 Ports Sensor Input

- 2.4GHz wireless antennas

Gigabit Ethernet Port :

To connect to IP cameras

and Client software

RS232 Port :

To connect devices

such as POS

Reset Button :

To return all configurations

to factory default values

WPS Button :

To automatic detect and

connect to wireless cameras

WiFi Antennas

Vista VK2-REC04HDW Quick Start Guide

2. Installation

2.1 Connecting Power and Network

• Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the broadband router (or Network Switch) and

the other end of the cable to the network port on the NVR.

VK2-REC04HDW

Example Broadband Router

Network Connections

Vista VK2-REC04HDW Quick Start Guide

• Connecting Alarms

Alarm Input :

You can use external devices to signal the network camera to react on events. Mechanical or electrical

switches can be wired to the Alarm Input 1~8 and GND (Ground) connectors.

GND(Ground) :

Connect the ground side of the alarm input to the G (Ground) connector.

Alarm Output :

The network camera can activate external devices such as buzzers or lights. Connect the devices

to the Alarm Output 1~8 and C(Common) connectors.

• Connecting the Power

Connect the DC power adaptor to the NVR. As the power is supplied, the Power LED will start

flickering, indicating stand-by mode. Pressing the POWER button will turn the power on and the

Power LED will light.

Vista VK2-REC04HDW Quick Start Guide

2.2 Discovering the NVR

The Network Video Recorder supports operation through the network. When the NVR is first connected to

the network it has an IP address assigned to it by your broadband router. So, it is not necessary to allocate an

IP address.

Contained on the CD supplied is a program called Smart Manager. Smart Manager detects Vista IP devices on

your network. Using a windows machine connected to your network (Wireless or Wired Connection), install

smart manager.

1. Ensure the NVR is connected the broadband router and powered up.

2. Start SmartManager utility ( All programs > SmartManager), the main window will be displayed, after a

short while any network devices connected to the network will be displayed in the list.

3. To access the NVR double click on the NVR listed in the Smart Manager, this will automatically launch the

Internet Explorer and display the login window for the NVR.

Please Note –Depending on your computer setup, you may be requested to install an internet explorer add-

in. Please select yes or install when prompted.

Vista VK2-REC04HDW Quick Start Guide

2.3 Connecting to the NVR Manually

1. Start a browser (Internet Explorer).

2. Enter the IP address or host name of the Network Video Recorder in the Location/Address field of your

browser.

3. If the NVR has not been configured, Setup Wizard will be shown. This drastically reduces the time

required for system installation. Images from cameras are connected and recorded automatically to the

NVR, so that you can start monitoring and recording instantly.

Default Username and Password

Username: admin

Password: admin

Vista VK2-REC04HDW Quick Start Guide

2.4 Setup Wizard

[Step1]

The Setup Wizard window will be shown if you are accessing the NVR for the first time.

Enter the date and time settings. You can select to synchronize the server time with an internet time server.

If you enter a domain name for the NTP server.

Vista VK2-REC04HDW Quick Start Guide

[Step2]

Easy Installation means the NVR will detect Vista VK2 cameras wired to your broadband router and register

them automatically.

You can change the admin password or use the default password (admin) for cameras to be detected.

PLEASE NOTE - Easy Install automatically detects cameras on the network, if you have more than four

cameras on the network, it’s recommended that Easy Install be un-ticked and manual camera search is used.

Click the Next button to go to next page.

[Step3]

The NVR displays any cameras already connected to the NVR if no cameras are displayed you may need to

search for the cameras.

Vista VK2-REC04HDW Quick Start Guide

Click the Search Cameras button and the Camera Discovery window appears. Select one of three in

Search Mode and click the Start Search button.

•Search Mode:

-Auto Search (LAN): Lists cameras in a LAN environment. (Recommended)

-IP Search (Single): Allows you to enter the IP address of a device. You can search more than

one device at a time by entering a range of IP addresses.

-Domain Name Search: Allows you to enter the domain name registered on a DDNS server if the

camera uses the DDNS function.

All cameras detected are displayed in the list. Display the name and IP address the selected camera. The

name will be updated automatically depending on the settings of the network camera.

Table des matières

Autres manuels Vista DVR

Vista

Vista QE04-XXXh Manuel utilisateur

Vista

Vista Quantum PLUS H.264 Manuel d'instructions

Vista

Vista Optio OPNVR Series Manuel utilisateur

Vista

Vista 0150-0267A Manuel utilisateur

Vista

Vista QNVR04P Manuel utilisateur

Vista

Vista QTVI08L Manuel utilisateur

Vista

Vista VIPER HDA Manuel utilisateur

Vista

Vista QP04-XXXhf Manuel utilisateur

Vista

Vista Quantum XTRA Manuel utilisateur

Vista

Vista SmartDisc 10IP Manuel de service

Vista

Vista Viper Manuel utilisateur

Vista

Vista Quantum PLUS H.264 Manuel utilisateur

Vista

Vista Optio OPNVR Manuel utilisateur

Vista

Vista VL-04DVR Manuel utilisateur

Vista

Vista MiniD400 Mode d’emploi

Vista

Vista SmartDisc 4/10 VLS-04DR-Series Manuel de service

Vista

Vista Viper series Manuel utilisateur

Vista

Vista Quantum Evolution QUANTUM04-XXEVs Manuel utilisateur

Vista

Vista SmartDisc 02 VLS-02DR Series Manuel de service

Vista

Vista QNVR Manuel utilisateur

Vista

Vista Quantum EVO Manuel utilisateur

Vista

Vista SmartDisc VLS-DR Manuel de service

Vista

Vista VVRL-960 Manuel utilisateur

Vista

Vista Quantum Plus Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur