Visonic PowerMax Partitions II Manuel utilisateur

A quick start guide to

PowerMax Partitions II

Product Management Team

April, 2010

What Are Partitions?

• The PowerMax includes an optional partition feature. Partitioning

allows you to have up to three independently controllable areas

whereby each can be in the HOME, AWAY or DISARM state.

• Each independent area is called a ‘partition’ and has its own

defined zones, user codes, etc.

• Partitions provide highly flexible control in premises where multiple

areas need to be monitored or secured independently.

Using Partitions in the Workplace

• The area in this example has 2 offices (accountant’s and solicitor’s)

• Each office runs independently with different working hours

• The reception area is shared by both offices

• Each area has a NEXT motion detector installed

The reception area is explained later in the ‘common area’ section

Accountants Solicitors

Reception

Partition 1 Partition 2

Common area

Partitions II – What’s New?

• Partitions II, Visonic's new version of partitioning, now provides

enhanced partitioning capabilities of the PowerMaxPro, including:

• Common areas

• Simultaneous control over multiple partitions

• Intuitive LCD display

• Smart siren operation

STEP 1: Planning & Enabling

• The panel comes with partitioning feature disabled.

• The first step is to enable Partitions II feature:

• From the INSTALLER MODE select PARTITIONING

and press

• Select ENABLE and press twice

To avoid confusion and to make installation simpler, it is recommended to

note down the zones and their corresponding partitions

STEP 2: Defining Partitions

• Partitioning programming is performed via the DEFINE ZONES menu.

• For each zone, set the zone type, name and chime option, as per the

installer manual.

• Select the PARTITION option (follows CHIME)

• The screen will display [ P1:- P2:- P3:-] Black squares indicate the

partitions to which the current zone is assigned.

• Assign the zone to its proper partition or partitions (1, 2, or 3).

• To select partitions simply press , or on the keypad

respectively.

• Press twice to confirm the settings.

A zone must be assigned to at least one partition at all times

STEP 3: Setting User Codes & Keyfobs

• User code 1 is the master user code and controls all 3 partitions.

• Other user codes can control only a specific partition or a

combination of partitions defined by the master user during setup.

• After selecting and defining user codes, select the

ACCESS TO PART menu to associate the user code with a

partition or a partition combination.

• Keyfobs are associated with a partition or a partition

combination during enrolment, performed via the

ENROLLING menu

To change the partition association of keyfobs

simply re-enroll the keyfob

Arming and Disarming the System

• A user, using a user code or an

MCT-237 two-way keyfob, can control

all partitions associated with the code

or keyfob simultaneously, or an

individual partition

• When using MCT-234 keyfob or the

MCM-140 remote commander, a user

can only control all the associated

partition(s) simultaneously

(i.e. no control over individual partitions). MCT-234

MCT-237

MKP-150

MCM-140+

MCM-140

Arming multiple partitions

• Arm or Disarm as without partitions

• All partitions associated with the

user code are Armed or Disarmed

Arming a specific partition

1. Press

2. LCD will show SELECT PARTITION

3. Press 1, 2, or 3 to select the partition

4. Press / (Arm) or

(Disarm)

PowerMax & MKP-150/151 Keypad

Partition Select Button

MCT-237 Two-way Keyfob

Arming multiple partitions

• Pressing the arming buttons without selecting an

individual partition Arms/Disarms all defined partitions.

Arming a specific partition

1. Press

2. In the LCD display, a digit [ P1:- P2:- P3:-]

will light to indicate the currently selected partition

3. Repeated pressing of selects the following

partitions

4. Press , or within 5 seconds

Partition Select Button

Autres manuels pour PowerMax Partitions II

Table des matières

Autres manuels Visonic Système de sécurité

Visonic

Visonic PowerMaster-10 G2 Manuel d'instructions

Visonic

Visonic GB-501 PG2 Manuel utilisateur

Visonic

Visonic POWERMASTER-10 Instructions de montage

Visonic

Visonic POWERMAXCOMPLETE PANEL - Instructions de montage

Visonic

Visonic PowerMaster 360 Instructions de montage

Visonic

Visonic PowerMax Plus Manuel utilisateur

Visonic

Visonic POWERMASTER-10 Manuel utilisateur

Visonic

Visonic POWERMAXCOMPLETE PANEL - Manuel utilisateur

Visonic

Visonic MC-302E PG2 Manuel utilisateur

Visonic

Visonic PowerMaster-10 G2 Manuel utilisateur

Visonic

Visonic POWERMAX PRO Instructions de montage

Visonic

Visonic MCS-730 Manuel utilisateur

Visonic

Visonic MCS-740 Manuel de service

Visonic

Visonic MC-302 PG2 Manuel utilisateur

Visonic

Visonic POWERMAX - Mode d'emploi

Visonic

Visonic PB-101 PG2 Manuel utilisateur

Visonic

Visonic SR-730 PG2 - Manuel utilisateur

Visonic

Visonic PowerMax Complete Instructions d'utilisation

Visonic

Visonic AXS-10 PRO Manuel utilisateur

Visonic

Visonic PowerMaster-10 G2 Manuel utilisateur

Visonic

Visonic POWERMAXEXPRESS - Manuel utilisateur

Visonic

Visonic SR-720B PG2 Manuel utilisateur

Visonic

Visonic POWERMAXCOMPLETE PANEL - Manuel utilisateur

Visonic

Visonic MCS-720 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur