Virtual Reality VRCD400-USB Manuel utilisateur
Owner’s Manual
AM/FM Receiver, CD/MP3/WMA Player with
USB Port, Aux In, & Detachable Face
VRCD400-USB
INSIDE FRONT COVER
DOES NOT PRINT
1
Welcome!
Dear Customer,
CONGRATULATIONS. The VRCD400-USB Compact Disc Player and AM/
FM Stereo Receiver with USB Port and AUX In, when used as described, will
give you years of dependable service in your car, truck, RV, or mini-van. We
have taken numerous measures in quality control to ensure that your product
arrives in top condition and will perform to your satisfaction. In the rare event
that your VRCD400-USB Compact Disc Player and AM/FM Stereo Receiver
with USB Port and AUX In contains a damaged or missing item, does not
perform as specified, requires warranty service, or you have an installation
problem, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE
CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA
1-800-445-1797 and ask to speak with a member of our technical service
team; or submit your questions by e-mail to customerservice@vr-3.com and
a member of our technical service team will respond by e-mail to your ques-
tions. Our in-house technical service team will expedite delivery of your part,
advise you on installation, or help troubleshoot a problem with you. If your
product needs warranty service, our technical service team representative will
help you obtain the fastest remedy possible under the warranty.
Contents
Precautions .......................................................................................................2
Notes on Installation ........................................................................................3
Before You Install.............................................................................................4
Installation (DIN Front Mount) ......................................................................5
Installation (Vehicle's Brackets).......................................................................6
Wiring Connections..........................................................................................7
Location of the Controls ..................................................................................8
Remote Control ................................................................................................9
Basic Operation..............................................................................................10
Radio Operation .............................................................................................11
CD Operation ........................................................................................... 11-12
MP3/WMA Operation (CD)..................................................................... 12-14
USB Operation ...............................................................................................14
AUX IN, RCA, & Subwoofer Control ..........................................................15
Maintenance ...................................................................................................15
Simple Troubleshooting Guide ......................................................................16
Specifications .................................................................................................17
Warranty .........................................................................................................18
Care of Discs
• Handle the disc by its edge to keep
the disc clean. Do not touch the
disc’s surface.
• Do not use a CD with paste or ink
residue on it.
• Do not use CDs with labels or stick-
ers attached. The label may leave
a sticky residue when it begins to
peel.
• Clean the discs with an optional
cleaning cloth. Wipe each disc from
the center out.
2
Precautions
• This unit will only play the following discs.
• This unit does not play files that have Digital Rights Management(DRM).
• If you have files that have Digital Rights Management(DRM) you should consult with
the vendor that you purchased files from for instructions on proper use.
Type of disc
CD, MP3, & WMA
Label on the disc Recorded material
Audio only
Size of disc
12 cm
• Do not attempt to modify the unit.
• Modifying the unit will void the
warranty.
• Stop the vehicle before carrying out
any operation that could interfere
with your driving.
• Do not operate in extremely high or
low temperatures. The temperature
inside the vehicle should be between
32º F (0º C) and 100º F (37º C)
before turning on your unit.
3
Notes on Installation
• Disconnect negative battery terminal before starting installation. Consult the
vehicle’s owner’s manual for proper instruction.
• The unit is designed for a 12Volt DC negative ground operation system only.
Before installing the unit, make sure your vehicle is a 12Volt DC negative
ground system.
• Be sure to connect the color coded leads according to the diagram. Incorrect
connections may cause the unit to malfunction or damage the vehicle's elec-
trical system.
• Be sure to connect the negative (-) speaker leads to the negative (-) speaker
terminal. Never connect negative (-) speaker leads to chassis ground.
•
The unit is only designed for use with 4 speakers. Do not combine output for use
with 2 speakers. Do not ground negative speaker leads to the chassis ground.
•
Make sure all the connections are completely correct before turning on your unit.
• When replacing the fuse(s), the replacement must be of the same amperage
as shown on the fuse holder.
• Do not block vents or heater panels. Blocking them will cause heat to build
up inside and may result in fire.
• After completing the installation and before operating the unit, reconnect the
battery. Then press the (RES) button with a pointed object, such as a ball-
point pen to set the unit to its initial status.
Parts
2 Keys
2 Hex Nuts
2 Lock Washers
1 Sheet Metal Screw
1 Metal Support Strap
1 Flat Washer
1 Mounting Bolt
1 Faceplate Case
1 RCA to 1/8" Stereo Plug
Marking the polarity of the speaker
wires will make it easier to connect the
existing speakers to the VRCD400-USB.
Consult wiring diagram of existing head
unit before disconnecting any wires. If a
wiring diagram is not available contact
the manufacturer.
1.
While the old unit is playing, discon-
nect the wires from one speaker.
2. Take a length of masking tape and
fold it around the wire so it forms a
flag.
3. On the masking tape mark the polar-
ity of the speaker wires (+ & - ), as
well as left or right, and front or rear.
4. Double check that you marked the
first speaker correctly by checking
that the speaker wires are the same at
the head unit.
5. Repeat this procedure for all of the
speakers.
6. Mark the power, ground, and any
other wires also
.
4
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Call number above for assistance,
or visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Before You Install
2. Mark Polarity of the Speaker Wires
Automotive audio equipment installations can be troublesome at times, even to the most
experienced of installation technicians. If you are not confident working with electrical
wiring, removing and reinstalling interior panels, carpeting, dashboards or other compo-
nents of your vehicle, please call our toll-free help line 1-800-445-1797 and our in-house
technical service team will answer your installation questions. Contact the vehicle's
manufacturer for vehicle specific instructions, or consider having the VRCD400-USB
professionally installed.
1. Remove the outer trim frame. 2. Insert the keys supplied with the old unit
into both sides of the unit as shown in fig-
ure below until they click. Pull to remove
the old unit from the dashboard.
1. Remove the Old Unit from the Dashboard
DIN Front Mount
DO NOT DISCONNECT WIRES AT THIS TIME!
NOTE:
If you are not pos-
itive of the polarity of the exist-
ing wires from the speakers to
the head unit, install new wires.
IMPORTANT:
Remove the two transport screws from the top of the unit before installing.
5
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Call number above for assistance,
or visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Installation
WARNING!
Disconnect negative battery terminal from battery before starting instal-
lation. Consult the vehicle’s owner’s manual for proper instructions.
NOTE:
Mark the polarity of the existing speaker wires before disconnecting battery.
NOTE: Remove the two transport screws from the top of the unit before installing.
1. After removing the old
radio and mounting sleeve,
insert supplied mount-
ing sleeve into opening.
2. Bend the tabs on the mount-
ing sleeve to keep the mount-
ing sleeve firmly in place.
3. Attach wires from the
VRCD400-USB to exist-
ing wires. See wiring connec-
tions diagram. Insert radio into
dashboard. Then apply the
trim frame to outside of radio.
4. Support radio using sup-
plied rear mounting bolt
and steel bar. See parts list.
DIN Front Mount
Installation
NOTE: Outer trim frame, hook, and mounting sleeve are not used for this installation.
This is only intended as a general guide; contact the vehicle's manufacturer for specific
instructions.
This method of installation uses the screw holes at the sides of the unit and the holes of
the existing vehicle mounting bracket.
1. Remove the hooks on both sides.
2.Align the screw holes of the mounting bracket supplied with the car and the screw holes of
the main unit. Tighten the 2 screws on each side of the unit. Then fasten the brackets to the car.
3. Attach wires of the VRCD400-USB to existing speaker wires. See wiring diagram.
6
Vehicle’s Built-in Brackets
7
Wiring Connections
GREEN +
GREEN/WHITE -
GRAY +
GRAY/WHITE -
BROWN+
BROWN/WHITE -
BLUE +
BLUE/WHITE -
Connect to power antenna or remote for amplifier
To Dash Panel Light
FUSE
ORANGE
WHITE
YELLOW
Memory +
BLACK
RED
Connect YELLOW to battery or live + 12 Volts of power
Negative Ground -
12 Volt Positive +
• Antenna Socket
• Subwoofer Out
• Hole for Mounting Bolt
• Wire Harness Socket
• RCA Line Out
Left Front Right Front
Left Rear Right Rear
Red = Right
White = Left
Red = Right
White = Left
• Aux. In
Make sure that you have a good chassis ground. Good ground connections will eliminate most
electrical noise problems. A good chassis ground requires a tight connection to the vehicle's
metal chassis. The area around the ground connection should be clean, bare metal without rust,
paint, plastic, dust, or dirt for a good electrical connection.
Speaker Wiring Notes
Follow the above wiring diagram to install the
head unit with new or existing speakers.
• This unit is designed for use with four (4)
speakers with an impedance between 4 Ohms
to 8 Ohms.
• An impedance load of less than 4 Ohms could
damage the unit.
• Never bridge or combine the speaker wire
outputs. When not using four speakers, use elec-
trical tape to tape the ends of the unused speaker
outputs to prevent a short circuit.
• Never ground the negative speaker terminals
to chassis ground.
8
Location of the Controls
1. SEL - Sound Select
2. VOL - Volume Control
3. Eject Button
4. USB 2.0 Port
5. CD Slot
6. Mode & Local/Distant
7.
Seek Up/Down & Fast Forward/Reverse
8. Power Button
9. Loudness Button
10. Mute Button
11. Band/ID3 Button
12. No. 6 Pre-Set/10+
13. No. 5 Pre-Set/10-
14. No. 4 Pre-Set/Random
15. No. 3 Pre-Set/Repeat
16. No. 2 Pre-Set/Intro
17. No. 1 Pre-Set/Play/Pause
18. Clock
19. Pre-Set Scan & Store
20. Faceplate Release
21. Reset Button
22. USA/Europe Switch
1
2 3 8
10
13 11
67
12 9
1415
16
171819
20
21
4 5
22
Table des matières
Autres manuels Virtual Reality Récepteur de voiture
Virtual Reality
Virtual Reality VRCD300-USB Manuel utilisateur
Virtual Reality
Virtual Reality VRCD400-SDU Manuel utilisateur
Virtual Reality
Virtual Reality VRCD500-SDU Manuel utilisateur
Virtual Reality
Virtual Reality VR3 VR500CS-BT Manuel utilisateur
Virtual Reality
Virtual Reality VRCD400-SDU Manuel utilisateur
Virtual Reality
Virtual Reality Elite VR500CS-BT Manuel utilisateur
Virtual Reality
Virtual Reality VRCD220FD Manuel utilisateur
Virtual Reality
Virtual Reality VRVD630 Manuel utilisateur
Virtual Reality
Virtual Reality VRVD630 Manuel utilisateur
Virtual Reality
Virtual Reality VRCD500-SDU Manuel utilisateur
