Vip-Vision INTIPMONDW Manuel utilisateur
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
1
VIP Residential IP Intercom
Installation Guide
INTIPMOND(W/B) / INTIPRDSDB / INTIPRDSVW
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
2
Table of Contents
1 Pre-Installation 4
1.1 Installation Requirements & Notes 4
1.2 Door Station Web Interface Login 4
1.3 Components 5
2 Installation 9
2.1 1 Indoor Monitor Door Station (Hardwired, No Network Functionality) 9
2.2 1 Indoor Monitor to 1 Door Station via a Network Switch (Hardwired) 10
2.2.1 Door Station Configuration 11
2.2.2 Indoor Monitor Configuration 11
2.3 1 Indoor Monitor to 1 Door Station via a Wireless Access Point (Wireless) 12
2.3.1 Door Station Configuration 13
2.3.2 Indoor Monitor Configuration 14
2.4 2 Indoor Monitors to 1 Door Stations via Wireless Access Point (Wireless) 16
2.4.1 Door Station Configuration 17
2.4.2 Master Indoor Monitor Configuration 18
2.4.3 Extension Indoor Monitor Configuration 19
2.5 2 Indoor Monitors to 1 Door Station via a Network Switch (Hardwired) 22
2.5.1 Door Station Configuration 23
2.5.2 Master Indoor Monitor Configuration 23
2.5.3 Extension Indoor Monitor Configuration 24
2.6 2 Indoor Monitors to 2 Door Stations via a Wireless Access Point (Wireless) 26
2.6.1 Door Station 1 Configuration 27
2.6.2 Door Station 2 Configuration 28
2.6.3 Master Indoor Monitor Configuration 29
2.6.4 Extension Indoor Monitor Configuration 31
2.7 2 Indoor Monitors to 2 Door Stations via a Network Switch (Hardwired) 33
2.7.1 Door Station 1 Configuration 34
2.7.2 Door Station 2 Configuration 34
2.7.3 Master Indoor Monitor Configuration 35
2.7.4 Extension Indoor Monitor Configuration 36
3 Additional Configuration 37
3.1 How to change the Indoor Monitor's IP Address 37
3.2 How to set up an Indoor Monitor as an Extension Monitor 37
3.3 Setting the Time and Date 38
3.4 Indoor Monitor Volume Configuration 38
3.5 Door Station Volume Configuration 39
3.6 Door Station Video Settings 39
3.7 Wiring an Electric Door Strike to the Door Station 40
3.8 Adjust Electric Door Strike Timing 41
3.9 Learning in Swipe Cards 41
3.10 Deleting Swipe Cards 42
3.11 Disabling the Unlock Feature 42
3.12 P2P Configuration (QR Code) 43
3.13 Advanced Configuration for Remote Access (optional) 45
3.14 Changing Door Station Network Ports (optional) 45
3.15 Finding out your network range, and available IP addresses via PC 46
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
3
3.16 Using a PoE Switch to Power the Intercom System (Sold Separately) 47
3.17 Adding IP Cameras to an Indoor Monitor 48
3.18 Adding Your Door Station to a VIP Vision NVR 49
4 How to Use Your Intercom System 50
4.1 Making and Answering Calls 50
4.2 Taking Videos / Snapshots from the Indoor Monitor 50
4.3 Viewing Your Videos/Snapshots from the Indoor Monitor 50
4.4 Viewing Your Videos/Snapshots from a Computer 51
4.5 Calling Between Indoor Monitors 51
4.5 Create Favourites 52
5 Updating Intercom Firmware 53
6 Troubleshooting 55
7 Limited Warranty 56
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
4
1.2 Door Station Web Interface Login
1 Pre-Installation
1.1 Installation Requirements & Notes
To access the door station's Web Interface, you will need a Windows computer in the same IP address range.
The Basic Settings password is 123456, which can be entered after pressing the settings button.
The Network Settings password is 888888, which can be entered after holding the settings button for 6 seconds.
The Door Station’s web interface will require the default username admin and password admin.
The Door Station’s default IP address is 192.168.1.110
The Indoor Monitors default IP address is 192.168.1.109
Please note that only the Door Station has a web interface; the Indoor Monitor does not.
1. Open Internet Explorer and input the Door Station
IP Address in to the address bar.
e.g. http://192.168.1.110
(Refer to Section 3.1 for how to change the door
station's IP address.)
2. Log in with the default username admin, password
also admin.
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
5
1.3 Components
VIP Residential IP Intercom Indoor Monitor with WiFi
Product ID — INTIPMONDW (white) INTIPMONDB (black)
• Advanced H.264 Video Compression Technology for High Quality Images
• 1024 x 600 pixel resolution
• 7”Touch Screen
• MicroSD Card Slot
VIP Residential IP Intercom Door Station with WiFi
Product ID — INTIPRDSDB
• 1MP Camera
• Built-in NFC Card Reader
• Weather Resistant Front Panel (Sheltered Installation recommended)
• Loudspeaker
• Door Release Output
VIP Residential IP Intercom Door Station
Product ID — INTIPRDSVW
• 1MP Camera
• IP54 Rated
• Loudspeaker
• Door Release Output
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
6
INTIPMONDW/B - Front
INTIPMONDW/B - Back
3 4 5 6 7
2
1
1Mic Records audio
2Screen Main display
3Emergency button Unused
4Monitor button Monitors Door Station video
5Home button Return to the Indoor Monitor's homepage
6Call button Accept call, or hang up the current call
7Unlock During a call or while monitoring a Door Station,
press to unlock that Door Station
1Reset button Resets the Indoor Monitor
2RJ-45 port Connect a Cat5 cable with the included adaptor
3Debug port Unused
4RS485 485 expansion interface
5Alarm interface 6ch alarm input / 1ch alarm output
6Speaker Audio output
7SD card slot For external SD storage
2
3
4
5
6
7
1
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
7
1Bracket position To fix the device to the wall
2Tamper switch This must be fully pressed down once installed. If
the switch is released, the alarm will sound.
3Reset button Resets the Door Station
4RJ-45 port Connect a Cat5 cable with the included adaptor
5Input connectors Connections for 12V DC and Door Strike wiring
1Mic
2Camera
3Card area
4Status indicator
5Call button
6Speaker
INTIPRDSDB - Front
INTIPRDSDB - Back
2
5
4
3
1
6
2
1
4
3
5
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
8
1Camera Adjustment Insert a small screwdriver, and gently move the
camera to the desired position
2Tamper Switch This must be fully pressed down once installed. If
the switch is released, the alarm will sound.
3RJ-45 Port Connect a Cat5 cable with the included adaptor
4Debug Port Unused
5Input Connectors Connections for 12V DC and Door Strike wiring
1Microphone
2Camera
3Compensation Light
4Speaker
5Name Plate
6Call Button
INTIPRDSVW - Front
INTIPRDSVW - Back
2
2
3
3
4
5
4
6
5
1
1
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
9
If this is your first time purchasing a VIP Residential IP Intercom, we recommend setting it up on the bench
before installation, to familiarize yourself with the product.
If you are setting up more than one Door Station, or wish to connect to the Door Stations web interface, a
Windows computer is required to login to the Door Station.
The IP intercom requires a Cat5 cable to be run between the Indoor Monitor, and Door Station. If you wish to
connect to the system remotely your Indoor Monitor and Door Station must be connected to your modem or
network switch (sold separately). 12V DC power must be provided to each Door Station and Indoor Monitor.
When connecting to the Door Stations’web interface, the default IP address is 192.168.1.110. We recommend
using Internet Explorer to connect to the Door Station. Please note that the Indoor Monitor does not have a web
interface.
This configuration requires a length of Cat5 cable running between the Indoor Monitor and Door Station.
The following is required for this installation:
• 12VDC power for both the Door Station and Indoor Monitor
• Cat5 cable
1. Install each unit at their respective location and connect the devices together with a Cat5 cable.
2. Power both the Indoor Monitor and Door station with 12VDC.
3. You have now successfully connected your VIP Residential IP Intercom.
2 Installation
2.1
1 Indoor Monitor Door Station (Hardwired, No Network Functionality)
+ / -
12VDC
+ / -
12VDC
Power
Cat5e
Indoor MonitorDoor Station
VIP Vision Residential IP Intercom Installation Guide - v1.3 Issued April 2017
10
Device IP Adresses Subnet Mask Gateway Room Number VTO Number
Door Station 10.1.1.110 255.255.255.0 10.1.1.1 6901
Master Indoor
Monitor
10.1.1.111 255.255.255.0 10.1.1.1 9901
This configuration allows you to connect your Indoor Monitor and Door Station together, and provide them
with network access.
The following is required for this installation:
• 12VDC power for both the Door Station and Indoor Monitor
• Cat5 cables to connect between the Indoor Monitor, Door Station and Network Switch (sold separately), and
between the Network Switch and a Windows computer
• A Windows computer for configuration
In this example, we are going to connect the intercom Door Station and Indoor Monitor to a Network Switch
and assign static IP addresses to both the Door Station and Indoor Monitor.
2.2
1 Indoor Monitor to 1 Door Station via a Network Switch (Hardwired)
Indoor MonitorDoor Station
+ / -
12VDC + / -
12VDC
Power
Cat5e
Switch
Internet Router
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Vip-Vision Système d'interphone
