ViewSonic VS18289 Manuel utilisateur
PD1631
PD1631T
Pen Display
User Guide
Model No. VS18289
P/N: PD1631 | PD1631T
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic®Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.
2
Thank you for choosing ViewSonic®
As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding
the world’s expectations for technological evolution, innovation, and simplicity.
At ViewSonic®, we believe that our products have the potential to make a positive
impact in the world, and we are confident that the ViewSonic® product you have
chosen will serve you well.
Once again, thank you for choosing ViewSonic®!
3
Safety Precautions
Please read the following before you start using the device.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instrucons.
• Allow at least 4" (10 cm) clearance around the device to ensure proper
venlaon.
• Place the device in a well-venlated area. Do not place anything on the device
that prevents heat dissipaon.
• Do not use the device near water. To reduce the risk of re or electric shock, do
not expose the device to moisture.
• Avoid exposing the device to direct sunlight or other sources of sustained heat.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other devices (including ampliers) that may increase the temperature of the
device to dangerous levels.
• Use a so, dry cloth to clean the external housing. Please see the "Maintenance"
secon for more informaon.
• Oil may collect on the screen if you touch it. Please see the "Maintenance"
secon for more informaon.
• Do not touch the screen surface with sharp or hard objects, as it may cause
damage to the screen. Only use the supplied pen, or ngers for models that
support touch input.
• When moving the device, be careful not to drop or bump the device on anything.
• Do not place the device on an uneven or unstable surface. The device may fall
over resulng in an injury or a malfuncon.
• Do not place any heavy objects on the device or connecon cables.
• If smoke, an abnormal noise, or a strange odor is present, immediately turn the
device o and call your dealer or ViewSonic®. It is dangerous to connue using
the device.
• When connecng to a power outlet, DO NOT remove the grounding prong.
Please ensure grounding prongs are NEVER REMOVED.
• Protect the power cord from being treaded upon or pinched, parcularly at the
plug, and at the point where it emerges from the equipment. Ensure that the
power outlet is located near the equipment so that it is easily accessible.
• Only use aachments/accessories specied by the manufacturer.
• Disconnect the device if it is not going to be used for a long period of me.
4
Contents
Safety Precautions....................................................... 3
Introduction ................................................................ 6
Package Contents ...................................................................................................6
Product Overview...................................................................................................7
Initial Setup................................................................. 8
Making Connections.................................................... 9
Installing Drivers and Software...............................................................................9
Pen Display Driver ................................................................................................... 9
Connecting to Power ............................................................................................10
Connecting External Devices ................................................................................11
HDMI Connection.................................................................................................. 11
Audio Connection.................................................................................................. 12
VGA Connection .................................................................................................... 13
USB Connection..................................................................................................... 14
Touch Function Control......................................................................................... 15
Using the Pen Display................................................ 16
Adjusting the Viewing Angle.................................................................................16
Tilt Angle Adjustment............................................................................................ 16
Turning the Device On/Off ...................................................................................17
Using the Control Panel Keys................................................................................17
On-Screen Display (OSD) Menu............................................................................18
Hot Keys ................................................................................................................ 19
Configuring the Settings .......................................................................................21
General Operations............................................................................................... 21
On-Screen Display (OSD) Menu Tree .................................................................... 23
Pen Input Area Mapping.......................................................................................25
5
Appendix................................................................... 27
Specifications........................................................................................................27
Pen ........................................................................................................................ 28
Product Dimensions .............................................................................................29
Troubleshooting ...................................................................................................30
Pen ........................................................................................................................ 30
Maintenance.........................................................................................................31
General Precautions.............................................................................................. 31
Cleaning the Screen............................................................................................... 31
Cleaning the Case.................................................................................................. 31
Replacing a Pen Nib..............................................................................................32
Regulatory and Service Information .......................... 33
Compliance Information.......................................................................................33
FCC Compliance Statement................................................................................... 33
Industry Canada Statement................................................................................... 33
CE Conformity for European Countries ................................................................. 33
Declaration of RoHS2 Compliance......................................................................... 34
Indian Restriction of Hazardous Substances ......................................................... 35
Product Disposal at End of Product Life................................................................ 35
Copyright Information ..........................................................................................36
Customer Service .................................................................................................. 37
Limited Warranty .................................................................................................. 38
Mexico Limited Warranty...................................................................................... 41
6
Introduction
Package Contents
Pen Display HDMI cable (1.5 m) Pen Replacement Pen
nib x 3
Power Cord Nib removal tool USB Cable (1.8 m) AC/DC Power
Adapter
Pen Display
PD1631T
Quick Start Guide
クイックスタートガイド
Aan de slag
Pika-aloitusopas
Guide de démarrage rapide
Schnellstarthandbuch
Guida introduttiva
Przewodnik Szybki start
Guia de Início Rápido
Guía de inicio rápido
Snabbstartsguide
Panduan Mulai Cepat
Quick Start Guide
The contents included in your package may vary depending on your
country. Please contact your local reseller for more informaon.
7
Product Overview
Front View
Rear View
HDMI
LINE
IN
5 6
1 2 3 4
VGA
1. DC IN 2. Audio In 3. Audio Out
4. HDMI 5. VGA 6. USB Upstream
For more informaon about the 1/2/▲/▼key and its funcons, refer to “Hot Keys”
on page 19.
Display
Screen
Security Lock
Slot
Adjustable
Stand
Wall Mounng
Points
Pen
8
Refer to the table below for the standard dimensions for wall mount kits.
For use only with a UL cered wall mount kit/bracket. To obtain a wall-
mounng kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Loading
(W x H)
Interface Pad
(W x H x D) Pad Hole
14 kg 75 x 75 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm
4 pieces
Wall mount kits are sold separately.
1. Turn o the device and disconnect all cables.
2. Place the device on a at, stable surface with the screen facing down.
3. Aach the mounng bracket to the VESA mounng holes at the rear of the
display. Then secure it with four (4) screws (M4 x 10 mm).
75 mm
4. Follow the instrucons that come with the wall mounng kit to mount the
display.
75 mm
9
System Requirements:
Operang system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above
Before connecng and using the pen display, it is necessary to install the below
soware. The soware can be downloaded at:
hp://www.viewsonicglobal.com/q/PD1631
Pen Display Driver
1. Open the ViewSign Console installaon le and install the driver.
2. Aer the installaon completes, you will need to restart the computer.
For further ViewSign Console informaon, please visit:
hps://manuals.viewsonic.com/ViewSign_Soware
1010
1. Connect the power cord to the power adapter.
2. Connect the power adapter to the DC IN jack at the rear of the display.
3. Connect the power cord to a power outlet.
1
2
3
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels ViewSonic Moniteur
ViewSonic
ViewSonic ViewPanel VP201m Manuel utilisateur
ViewSonic
ViewSonic VS11357 Manuel utilisateur
ViewSonic
ViewSonic ViewPanel VA720 Manuel utilisateur
ViewSonic
ViewSonic CDE5010 Manuel utilisateur
ViewSonic
ViewSonic FuHZIOn VX2268wm Mode d’emploi
ViewSonic
ViewSonic VS11248 Manuel utilisateur
ViewSonic
ViewSonic VA2432-mh Manuel utilisateur
ViewSonic
ViewSonic VA1601w-LED Manuel utilisateur
ViewSonic
ViewSonic LCDTV Manuel utilisateur
ViewSonic
ViewSonic G220FB - 21" CRT Display Manuel utilisateur
ViewSonic
ViewSonic E70M - 17" CRT Display Manuel utilisateur
ViewSonic
ViewSonic VA1721wmb - 17" LCD Monitor Manuel utilisateur
ViewSonic
ViewSonic VG2450-2 Manuel utilisateur
ViewSonic
ViewSonic VX3276-2K-MHD-7 Manuel utilisateur
ViewSonic
ViewSonic VS15741 Manuel utilisateur
ViewSonic
ViewSonic ViewPanel VE170 Manuel utilisateur
ViewSonic
ViewSonic ve510s/b-1 Manuel utilisateur
ViewSonic
ViewSonic E96FPlus Guide de dépannage
ViewSonic
ViewSonic P227FB Manuel utilisateur
ViewSonic
ViewSonic VG2030WM - 20" LCD Monitor Manuel utilisateur
