ViewSonic VA2012wb-1 Manuel utilisateur

ViewSonic VA2012w-1

VA2012wb-1

Model No. VS10859

20” Color TFT LCD Display

(VA2012w-1_VA2012wb-1_SM Rev. 1b Jun. 2006)

ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA- (800) 888-8583

Service Manual

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language or computer language, in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, manual or otherwise, without the prior written permission of ViewSonic

Corporation.

Disclaimer

ViewSonic makes no representations or warranties, either expressed or implied, with respect to

the contents hereof and specifically disclaims any warranty of merchantability or fitness for any

particular purpose. Further, ViewSonic reserves the right to revise this publication and to make

changes from time to time in the contents hereof without obligation of ViewSonic to notify any

person of such revision or changes.

Trademarks

Opt quest is a registered trademark of ViewSonic Corporation.

ViewSonic is a registered trademark of ViewSonic Corporation.

All other trademarks used within this document are the property of their respective owners.

Revision History

Revision SM Editing Date ECR Number Description of Changes Editor

1a 11/09/05 Initial Release G. Han

1b 06/19/2006 VS-E060102 J. Chang

Add 2nd source panel AUO M201EW01 v.0

(updated RSPL/BOM/EPL)

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

TABLE OF CONTENTS

1. Precautions and Safety Notices 1

2. Specification 5

3. Front Panel Function Control Description 12

4. Circuit Description 14

5. Adjustment Procedure 25

6. Troubleshooting Flow Chart 50

7. Recommended Spare Parts List 53

8. Exploded Diagram and Exploded Parts List 55

9. Block Diagram 59

10. Schematic Diagrams 60

11. PCB Layout Diagrams 67

1. Appropriate Operation

(1) Turn off the product before cleaning.

(2) Use only a dry soft cloth when cleaning the LCD panel surface.

(3) Use a soft cloth soaked with mild detergent to clean the display housing.

(4)Use only a high quality, safety approved AC/DC power cord.

(5)Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.

(6) If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.

(7) Do not touch the LCD panel surface with sharp or hard objects.

(8) Do not place heavy objects on the LCD display, video cable, or power cord.

(9) Do not use abrasive cleaners, waxes or solvents for your cleaning.

(10) Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

-Areas containing excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- In direct sunlight.

2. Caution

No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar

with all of the following safety checks and servicing guidelines.

3. Safety Check

Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is

exposed in such areas as the associated transformer circuits.

4. LCDModule Handling Precautions

4.1 Handling Precautions

(1) Since front polarizer is easily damaged, pay attention not to scratch it.

(2)Be sure to turn off power supply when connecting or disconnecting input connector.

(3)Wipe off water drops immediately. Long contact with water may cause discoloration or spots.

(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.

(6)Since CMOSLSI isusedinthis module, take care of static electricity and ensure human earth when handling.

(7)Do not open or modify the Module Assembly.

(8)Do not press the reflector sheet at the back of the module in any direction.

(9)In the event that a Module must be put back into the packing container slot after it was taken out of the

container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the

CFL Reflector edge softly. Otherwise the TFT Module may be damaged.

(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface

Connector of the TFT Module.

1. Precautions and Safety Notices

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

(11) After installation of theTFT Module intoan enclosure(LCDmonitor housing, for example), do not twist or

bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration

that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise theTFT Module

may be damaged.

(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local

ordinances or regulations fordisposal.

(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module

should be supplied with power that complies with the requirements of Limited Power Source

(IEC60950 or UL1950), or an exemption should be applied for.

(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950

or UL1950). Do not connect theCCFL to a HazardousVoltage Circuit.

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

Take out the monitor with cushion

correct method

Place the monitor on a clean & soft foam pad

Surface of the panel is pressed by fingers &

this may cause “ MURA “

Do not touch the surface of the polarizer .

incorrect method

Take out the monitor by grasping the LCD

panel. That may cause “ MURA“.

could

scratch the surface of panel

Handing and Placing Methods

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

when assemble&disassembly

bezel

when assemble&disassembly

bezel

when assemble&disassembly

bracket

when assemble&disassembly

bracket

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

2. Specificationtion

INTRODUCTION

FEATURES VA2012w/wb-1

Size 20.1” WIDE

Luminance (Typ/Min) 300 / 240 cd/㎡

Contrast Ratio (Typ/Min) 600:1 / 400:1

Colors 16.2 M colors

Response Time (Typ/Max) 8 /12 ms

Viewing Angle (H/V) 140 ° / 125 °

TFTLCD PANEL

(QDI)

Recommend resolution 1680 X 1050@60Hz

Size 20.1” WIDE

Luminance (Typ/Min) 300 / 240 cd/㎡

Contrast Ratio (Typ/Min) 800:1 / 400:1

Colors 16.7 M colors

Response Time (Typ/Max) 16 /40 ms

G to G 8ms (ave)

Viewing Angle (H/V) 176° / 176 °

TFTLCD PANEL

(AUO)

M201EW01 V.0

Recommend resolution 1680 X 1050@60Hz

Analog (75ohms, 0.7/1.0 Vp-p) Yes

Input Signal Digital Yes

Separate Sync Yes

Composite Sync No

Sync Compatibility Sync on Green No

PC Yes

Power Mac Yes

Compatibility TV Box (NextVision 6) Yes

Power Voltage AC 100-240V, 50/60Hz Yes

On Mode(Max / Typ) 50 W / 47 W

Power Consumption Active Off Mode (Max) < 2 W

Audio 1 W Yes

Tilt ( -5 ° 18 °)+/- 2 °Yes

Swivel ( -135 ° - 135 °) No

Pivot ( XX ° - XX °) No

Ergonomics

Height Adjust ( XX-XX mm) No

OSD Control [] [ 1 ] [ 2 ] [▲] [▼] [;+] [;-][;X] Yes

Physical (W x H x D) 479 x 423 x 216mm

Dimension Package (W x H x D) 540 x 505 x 175mm

Physical (lbs / Kg) 5.5 / 12.1 Kg

Weight Package (lbs / Kg) 7.0 / 15.4 Kg

Temperature ( / )℉℃ 32℉-104 / 0℉℃-40℃

Operating Condition Humidity (%) 20 % - 90 %

Temperature ( / )℉℃ -4℉-140 /℉-20℃-60℃

Storage Condition Humidity (%) 5 % - 90 %

Regulation

UL, cUL, FCC-B, CB, CE, NOM, TUV/GS, TUV ERGO (covers ISO13406-2 &

MPRII), TCO’03, GOST-R + 20 ORIGINAL COPIES HYGIENIC, SASO, PCBC,

BSMI, CCC, (PSB), (C-TICK), TUV-S, Green Mark, Energy Star, MIC, WEEE,

RoHS,

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

GENERAL specification

Test Resolution & Frequency “1680 X 1050” @ 60Hz

Test Image Size Full Size

Contrast and Brightness Controls Factory Default:

Contrast = 70%, Brightness = 100%

VIDEO INTERFACE

Analog Input Connector DB-15 (Analog), refer the appendix A

Digital Input Connector DVI-D (Digital), refer the appendix B

Default Input Connector Defaults to the first detected input

Video Cable Strain Relief Equal to twice the weight of the monitor for five

minutes

Video Cable Connector DB-15 Pin out Compliant DDC 1/2B

Video Signals 1. Video RGB (Analog)

Separate

2. TMDS (Digital)

Video Impedance 75 Ohms (Analog), 100 Ohms (Digital)

Maximum PC Video Signal 950 mV with no damage to monitor

Maximum Mac Video Signal 1250 mV with no damage to monitor

Sync Signals TTL

DDC 1/2B Compliant with Revision 1.3

Sync Compatibility Separate Sync

Video Compatibility Shall be compatible with all PC type computers,

Macintosh computers, and after market video cards

Resolution Compatibility 640 x 350, 640 x 480, 720 x 400 (640 x 400), 800 x

600, 832 x 624, 1024 x 768, 1280 x 720, 1280 x

1024, 1600 x 1200, 1680 x 1050

Exclusions Not compatible with interlaced video

POWER SUPPLY

Internal Power Supply Part Number: EADP-64CF

Input Voltage Range 90 TO 264 VAC

Input Frequency Range 47.5 TO 63 HERTZ

Short Circuit Protection Output can be shorted without damage

Over Current Protection Output current <10A

Leakage Current 3.5mA (Max) at 254VAC / 60Hz

EFFICIENCY 80 % typical at 115VAC Full Load

Fuse Internal and not user replaceable

Power Dissipation 64 Watts (typ)

Max Input AC Current 1.5 Arms @ 90VAC

INRUSH CURRENT (COLD START) 80 A(max) @230VAC

Power Supply Cold Start Shall start and function properly when under full

load, with all combinations of input voltage, input

frequency, and operating temperature

Power Supply Transient Immunity Shall be able to withstand an ANSI/IEEE C62.41-

1980 6000V 200 ampere ring wave transient test

with no damage

Power Supply Line Surge Immunity Shall be able to withstand 1.5 times nominal line

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

voltage for one cycle with no damage

Power Supply Missing Cycle Immunity Shall be able to function properly, without reset or

visible screen artifacts, when ½ cycle of AC power

is randomly missing at nominal input

Power Supply Acoustics

The power supply shall not produce audible noise

that would be detectable by the user. Audible shall

defined to be in compliance with ISO 7779 (DIN

EN27779:1991) Noise measurements of machines

acoustics. Power Switch noise shall not be

considered

US Type Power Cable Separate 3-prong NEMA 5-15P type plug. Length =

1.8m. Connects to AC outlet. Color = Black

European Type Power Cable Schuko CEE7-7. Length = 1.8m, Connects to AC

outlet. Color = Black

Power Saving Operation(Method) VESA DPMS Signaling

Power Consumption ON Mode < 50 W (max) / 47 W (typ)

ACTIVE OFF < 2W

Recovery Time ON MODE = N/A, ACTIVE OFF < 3 SEC

ELECTRICAL REQUIREMENT

Horizontal / Vertical Frequency

Horizontal Frequency ANALOG: 30 – 94 KHZ

DIGITAL : 30-82 KHZ

Vertical Refresh Rate 50 – 75 HZ.

Maximum Pixel Clock Analog: 205 Mhz

Digital: 165 MHz

Sync Polarity Independent of sync polarity.

Timing Table

Item Timing Analog Digital

1. 640 x 350 @ 70Hz, 31.5kHz Yes Yes

2. 640 x 400 @ 70Hz, 31.5kHz Yes Yes

3. 640 x 480 @ 60Hz, 31.5kHz Yes Yes

4. 640 x 480 @ 67Hz, 35.0kHz Yes Yes

5. 640 x 480 @ 72Hz, 37.9kHz Yes Yes

6. 640 x 480 @ 75Hz, 37.5kHz Yes Yes

7. 720 x 400 @ 70Hz, 31.5kHz Yes Yes

8. 720 x 480 @59.94/60Hz 15.7 kHz Yes Yes

9. 720 x 576 @50Hz 31.25kHz Yes Yes

10. 720 x 576 @50Hz 15.62kHz Yes Yes

11. 800 x 600 @ 56Hz, 35.1kHz Yes Yes

12. 800 x 600 @ 60Hz, 37.9kHz Yes Yes

13. 800 x 600 @ 75Hz, 46.9kHz Yes Yes

14. 800 x 600 @ 72Hz, 48.1kHz Yes Yes

15. 832 x 624 @ 75Hz, 49.7kHz Yes Yes

16. 1024 x 768 @ 60Hz, 48.4kHz Yes Yes

17. 1024 x 768 @ 70Hz, 56.5kHz Yes Yes

18. 1024 x 768 @ 72Hz, 58.1kHz Yes Yes

19. 1024 x 768 @ 75Hz, 60.0kHz Yes Yes

20. 1280 X 720 @ 50Hz 37.5kHz Yes Yes

ViewSonic Corporation Confidential - Do Not Copy VA2012w-1_VA2012wb-1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ViewSonic Moniteur

ViewSonic

ViewSonic VS16340 Manuel utilisateur

ViewSonic

ViewSonic ViewPanel VG171 Manuel utilisateur

ViewSonic

ViewSonic IFP5550 Manuel utilisateur

ViewSonic

ViewSonic VE902m Manuel utilisateur

ViewSonic

ViewSonic VA721 - 17" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VS14102 Manuel utilisateur

ViewSonic

ViewSonic ViewPanel VA720 Manuel utilisateur

ViewSonic

ViewSonic VG800B - 18" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic E72f+SB Manuel utilisateur

ViewSonic

ViewSonic VG3248-2K Manuel utilisateur

ViewSonic

ViewSonic ViewPanel VG171 Manuel utilisateur

ViewSonic

ViewSonic VP2365WB - 23" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VA3219-4K-MHD-7 Manuel utilisateur

ViewSonic

ViewSonic XG2530 Manuel utilisateur

ViewSonic

ViewSonic E70F - 17" CRT Display Manuel utilisateur

ViewSonic

ViewSonic CDP4260-L Manuel utilisateur

ViewSonic

ViewSonic VS17729 Manuel utilisateur

ViewSonic

ViewSonic VP930 Manuel utilisateur

ViewSonic

ViewSonic VP171B - 17" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic Q241WB - Optiquest - 24" LCD Monitor Manuel utilisateur

ViewSonic

ViewSonic VP2365-LED Manuel utilisateur

ViewSonic

ViewSonic P225 Manuel utilisateur

ViewSonic

ViewSonic VX2703mh-LED Manuel utilisateur

ViewSonic

ViewSonic VS11305 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation