ViewSonic Optiquest Q190mb Manuel utilisateur
Q190mb
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell’utente
LCD Display
Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan
color monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide proper protection against harmful
interference to a residential installation. This monitor generates, uses,
and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and
used. However, there is no guarantee that interference will not occur
in a particular installation. If this monitor does cause serious
interference to radio or television reception, resetting the monitor may
determine it. Moreover, users are encouraged to correct interference
by doing one or more of the following:
zReorient or relocate the receiving antenna.
zMove the monitor and the receiver further away from each other.
zConnect the monitor into an outlet on a circuit different from that
to which the receiver is connected.
zConsult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded
power supply cord and the provided shielded video interface cable
with bonded ferrite cores. Also, any unauthorized changes or
modifications to this monitor would void the user‘s authority to
operate this device.
Note: If necessary, shielded interface cables and AC power cord must
be used to meet the emission level limits.
EMI Certification
The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de class B respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.
04/16/04B
Content
Safety Precautions .......................................................................1
First Setup....................................................................................2
Front Panel Control .....................................................................3
Installation ...................................................................................3
Using OSD Functions..................................................................4
Supporting Timing modes .........................................................12
Technical Information ...............................................................13
Care and Maintenance ...............................................................14
Troubleshooting.........................................................................14
1
Safety Precautions
This monitor is manufactured and tested on a ground principle
that a user’s safety comes first. However, improper use or
installation may result danger to the monitor as well as to the
user. Carefully go over the following WARNINGS before
installation and keep this guide handy.
WARNINGS:
This monitor should be operated only at the correct power
sources indicated on the label on the rear end of the monitor.
If you’re unsure of the power supply in your residence,
consult your local dealer or power company.
Do not try to repair the monitor yourself as it contains no
user-serviceable parts. The monitor should only be repaired
by a qualified technician.
Do not remove the monitor cabinet. There is high-voltage
parts inside that may cause electric shock to human bodies,
even when the power cord is disconnected .
Stop using the monitor if the cabinet is damaged. Have it
checked by a service technician.
Put your monitor only in a clean, dry environment. Unplug
the monitor immediately if gets wet and consult your
service technician.
Always unplug the monitor before cleaning it. Clean the
cabinet with a clean, dry cloth. Apply non-ammonia based
cleaner onto the cloth, not directly onto the glass screen.
Keep the monitor away from magnetic objects, motors, TV
sets, and transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall
be installed near the equipment and shall be easily
accessible.
2
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
Video cable with 15 pin D-SUB connector.
Power cable.
Quick Installation
1. Connect video cable
Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer, then to the
monitor.
2. Connect power cord
Connect the power cord to a
properly grounded AC outlet,
then to the monitor.
4. Windows users : Setting the
Timing Mode (Resolution and
Refresh Rate)
Example: 1280 x 1024 @ 60 Hz
Resolution Right-click on the
Windows desktop > Properties >
Settings > “Desktop Area”. Set
the resolution.
Refresh Rate (vertical frequency)
See your graphic card’s user
guide for instructions.
3. Power-ON computer and
monitor
Power-ON the computer, then
Power-ON the monitor.
ViewSonic Wizard CD-ROM
3
Front Panel Control
❶❷ ❸ ❹❺➏
nACTIVATE/EXIT OSD qSELECT DESIRED FUNCTION
oSCROLLDOWN/DECREASE rLED INDICATOR
pSCROLL UP/INCREASE sPOWER ON/OFF
Installation
❼ ❽➒➓
❼POWER INPUT
❽AUDIO INPUT
➒DVI
➓VGA INPUT
4
Using OSD Functions
1. Press the ①
①①
①button to display the main menu shown below.
2. Press the ▲or ▼button to scroll to the desired menu option.
3. Press the ②
②②
②button to select the menu option.
4. Press the ▲or ▼button to select submenu option.
5. After making adjustment, press ①
①①
①button to save changes and exit the
screen.
Main Menu
Auto Adjust : Auto adjust horizontal, position vertical position, phase
(Fine Tune) and Clock (H-Size).
5
Contrast : To adjust the foreground white level of screen image.
▲:increase contrast, ▼: decrease contrast
Brightness : Toadjust the background black level of screen image.
▲:increase brightness, ▼:decrease brightness
Color Adjust : Provides four preset color adjustments:
9300K, 6500K, 5400K, and User Color for improved brightness and
color saturation. Press button ②②②② to select the preset color.
6
9300K--Adds blue to screen image for cooler white.
6500K--Adds to screen image for warmer white and richer red.
5400K--Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button ②②②② to set adjustment and select next color to adjust.
2. Press ▼or ▲button to adjust selected color.
Information : Displays information regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
7
Image Adjust : Adjust Horizontal /Vertical Position ,H. Size, Fine Tune
and Sharpness.
H./V. Position: To adjust the horizontal and vertical position of the video.
H. Position: ▲:moves screen to right, ▼:moves screen to left.
V. Position: ▲:moves screen to up, ▼: moves screen to down.
H. Size: Adjusts the width of screen image.
▼decreases width of screen image, ▲increases width of screen image.
Autres manuels pour Optiquest Q190mb
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ViewSonic Moniteur
ViewSonic
ViewSonic VX2718-P-mhd Manuel utilisateur
ViewSonic
ViewSonic Q201WB - Optiquest - 20" LCD Monitor Manuel utilisateur
ViewSonic
ViewSonic VX2767U-2K Manuel utilisateur
ViewSonic
ViewSonic VT4236LED Manuel utilisateur
ViewSonic
ViewSonic VS11383 Guide de dépannage
ViewSonic
ViewSonic VX3276-mhd Manuel utilisateur
ViewSonic
ViewSonic VG2227WM - 22" LCD Monitor Manuel utilisateur
ViewSonic
ViewSonic VA2855Smh Manuel utilisateur
ViewSonic
ViewSonic VX2209S Manuel utilisateur
ViewSonic
ViewSonic VA2756-4K-MHD Manuel utilisateur
ViewSonic
ViewSonic VX500+ Manuel utilisateur
ViewSonic
ViewSonic VG2230WM - 22" LCD Monitor Manuel utilisateur
ViewSonic
ViewSonic GT770 Manuel utilisateur
ViewSonic
ViewSonic EP1031r Manuel utilisateur
ViewSonic
ViewSonic PF775 Manuel utilisateur
ViewSonic
ViewSonic VA2265Sh Manuel utilisateur
ViewSonic
ViewSonic VG700 - 17" LCD Monitor Manuel utilisateur
ViewSonic
ViewSonic VX2453mh Manuel utilisateur
ViewSonic
ViewSonic Optiquest Q53 Manuel utilisateur
ViewSonic
ViewSonic EP3220T Manuel utilisateur
