VIETA Merge Manuel utilisateur
USER MANUAL
SJ8
Thank you for purchasing the Merge Smartwatch SJ8.
To ensure correct operation, please read this manual carefully before use.
English
Merge
Smartwatch
Have a problem
with your product?
Contact us at:
Email: [email protected]
www.vietapro.com
The adaptation platform requirements
Android 5.1 and above support.
iOS 8.0 and above support.
Bluetooth 4.0
You have these options:
1. Scan the QR with your smartphone to access to Youth Health application.
2. Android/Apple:
- Android: search for " Youth Health " though the software application (Google
Play Store) to download and install the application.
- Apple: search for " Youth Health " though the software application (Apple App
Store) to download and install the application.
Descargar la aplicación
www.vietapro.com
IMPORTANT: The recommended Youth Health app versions for Android and
iOS is 3.4 or above.
IMPORTANT: Please instead of pairing from smartphone “Bluetooth” settings,
follow the steps described on “How to pair” (to get all the Bluetooth communi-
cation between smartphone and watch).
NOTE: User can customize the wallpaper of the smartwatch with Youth Health
application. To do this, look for information in the application’s user manual.
To ensure the normal use of smartwatch, please charge it before using it for the
first time.
Please use matching charging cable to charge, and connect the charging
points on bracelet with the pin on the charger following the correct position.
For charging the smartwatch, please plug the USB end of the charging cable
into the USB port of a standard phone charger, desktop or laptop computer
with a standard 5V output. Not recommended to charge using power bank as
the output voltage is not of standard 5V.
On the smartwatch screen, the charging process will be displayed, showing the
battery status. Once charged it, the full battery will be displayed as full of
charge.
Antes de utilizar Vieta Smart Merge.
www.vietapro.com
It’s not possible to set the time of the smartwatch without synchronizing with
the Smartphone, because the watch time always show the same as Smartpho-
ne have. If you set the time on your Smartphone, it will automatically sync to
the smartwatch.
NOTE: The battery consumption of the smartwatch is higher when it remains
connected and synchronizing data with your smartphone. Therefore, it’s
recommended keep it disconnected when you finish to use between them.
Charging instructions.
Connect the magnetic connector into the charging position as shown in the
figure below, using smartphone charger 5V/1A.
www.vietapro.com
Pair the Vieta Smart Merge with your smartphone.
Turn on the smartwatch; press and hold the right button for many seconds to
turn the device on (and o).
Verify that your smartwatch is not connected to another smartphone before
connecting your smartphone. Otherwise, as the smartwatch is already connec-
ted to another smartphone, you will not be able to connect yours. To verify this,
on the main watch screen, slide your finger from top to bottom to access the
basic settings center, and verify that the Bluetooth icon does not appear
(indicated in the image below), indicating that there is no active pairing
[Bluetooth unpaired (Disconnected)].
Bluetooth not paired.
(Disconnected from smartphone).
Bluetooth paired.
(Connected to smartphone).
In the event that the icon appears without being connected to your smartpho-
ne, check on the other smartphones that the disconnection was successful.
Once the smartwatch is cleared of Bluetooth connections, you can start the
pairing process with your smartphone.
www.vietapro.com
Available the Bluetooth on your Smartphone. Active your GPS on the
smartphone.
Go to the Youth Health application (previously downloaded on your smartpho-
ne), go to "Smart watch" and select "Add a Device".
In the list, Vieta Merge will appear. Select the device and verify that the status
that appears is "Connected".
Please agreed the Bluetooth request in your smartphone and set available the
permissions of each application on your smartphone to sync the smartwatch.
www.vietapro.com
When in the Youth Health application, it appears as "Connected", check the
Bluetooth icon on the clock.
IMPORTANT: Before the entire pairing process between Vieta Smart Merge
and your smartphone, it is important that you have activated the GPS location
of your smartphone, in order to start the pairing process.
IMPORTANT: This watch model allows you to manage incoming calls but not
talk through it.
That is, you can only ignore or reject the call, but not answer it.
You can connect a Bluetooth headset / speaker to your smartphone if you wish,
as you will be able to speak through the paired device.
www.vietapro.com
Start-up functions of Vieta Smart Merge
Smartwatch right side buttons: use these buttons to:
- Power ON/OFF.
- Standby (turn ON/OFF the display).
- Return to the main screen.
- Enter to Application Center.
Power ON/OFF: press and hold the button for many seconds to turn ON/OFF
the device (this action must do on the main screen of the smartwatch).
Standby (turn ON/OFF the display): if you click once briefly on the button, it
puts the clock screen in energy saving state, and turns o the screen light
Return to the main screen: when you are in an application of the
smartwatch, pressing the button, you will go back to the main screen of the
device, thus existing the application that you were previously viewing.
Enter to Application Center: this button was designed to use as enter button
on a computer. The first click done on the main screen, allow access into the
Application center.
www.vietapro.com
Introduction to the Application Center
Sport: Step monitoring and sports training. [1]
It’s necessary to have paired with Youth Health on your Smartphone to be able to use this application.
Heart rate: Pulse monitor with the heart rate sensor. [1]
Sleep Monitor: Sleep stages and quality monitoring. [1]
It’s necessary to have paired with Youth Health on your Smartphone to be able to use this application.
Pedometer: Steps count data collected from smartwatch. [1]
It’s necessary to have paired with Youth Health on your Smartphone to be able to use this application.
The number of the steps shown on the watch will be reset to 0 whenever it’s synchronized with your
Smartphone, and will be reset every day (every 24h).
Remote notifier: Application notification center of your smartphone.
Check through the settings of your Smartphone, that the accessibility permissions to your watch are enabled
and accepted, to be able to view the notifications you will receive on your Smartphone through the watch.
Music: Select and play your music on your smartphone.
To do this, you must have the Youth Health application open on your Smartphone, otherwise you will not
able to play music.
Find my device: Locate your smartphone from the smart watch.
It’s necessary to have paired with Youth Health on your Smartphone to be able to use this application.
About: Vieta Smart Merge product information
Here you will find the MAC address to double check when you will pair the smartwatch with Youth Health on
your Smartphone.
Factory reset: restore factory settings.
Stopwatch: allows you to set the time.
Temperature: Wear the bracelet correctly on your (left/right) wrist. After wearing it for more than 15 minutes,
you can enter the temperature test interface to get a normal value.
www.vietapro.com
Your QR Code: quick access to Youth Health download store.
Countdown: This application allows you to count down in time, in chronometer format, for any matter that
requires a countdown.
Tension: This application allows to show the blood pressure of the human body of the user of the watch, to
verify that it is in the correct health margins.
Blood Oxygen: This application performs a measurement of the oxygen level in the blood, to verify that the
user's body is in the correct values.
Blood Pressure: This application shows the blood pressure that circulates through the veins of the wearer of
the watch.
Remote camera: If you have the Youth Health application opened (it is necessary that you have it open, or
that you have your smartphone unlocked, and was keep the permissions), you can use the Vieta Merge
smartwatch as a remote control to launch photos on your smartphone.
Alarm clock: allows you to configure alarms on your smart watch (these are not synchronized with your
Smartphone, since they are independent).
Add an alarm clock; edit, remove, turn o, and turn on the alarm.
Sedentary: set the reminders (through the Youth Health application on your smartphone) in the form of an
alarm (vibration and sound) every certain period of time, to remind the user that they must rest to take care
of their health.
Card: on the Basic applications you can choose the app that you need to show as quick access. Here, you
can select the application that you need it.
[1] These applications store data from previous measurements. When you will open each application, you will see the previous
measurement. Then, to do a new measurement, tap on the application icon that you opened on the smartwatch. In some
applications, you can view the stored data of each application; open the application that you want to know and sliding your finger
from down to up.
When you are inside the any application, if you slide you finger from left to right, you can go back to
the previous screen (without having to press any button on the watch to go back to the main screen).
If you are using some sport application, and slide your finger from left to right, the application will
show play icon to continue or stop button to finish the application.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels VIETA Montre
