Videoline MC-2620C Manuel utilisateur

Videoline

Super Nite-Vision

OSD B/W CCD Camera

MC-2620 series

MC-2620C/2620E

MC-2621C/2621E

MC-2622C/2622E

INSTALLATION INSTRUCTIONS

To ensure optimum performance of this CCD camera, please carefully read

all the instructions before installing. Incorrect operation or setting may result

in inferior picture quality.

CONTENTS

1. General................................................................................................................. 3

2. Descriptions......................................................................................................... 3

3. Lens Connections................................................................................................5

3.1 Video drive auto iris lens (with EE amp)......................................................... 5

3.2 DC drive auto iris lens (without EE amp)........................................................ 5

3.3 Manual or fixed iris lens.................................................................................. 5

4. OSD Setup ...........................................................................................................6

4.1 OSD Control Buttons ...................................................................................... 6

4.2 CP-01 Remote Controller................................................................................ 6

4.3 RS-232 Connection......................................................................................... 6

5. Setup Menu.......................................................................................................... 7

6. CAMERA ID-Camera title setting ........................................................................8

6.1 Selecting character......................................................................................... 8

6.2 Editing camera title ......................................................................................... 8

6.3 Setting title position ........................................................................................ 8

6.4 Setting title display.......................................................................................... 8

7. LIGHT CNTL – Exposure mode setting............................................................... 9

7.1 AES Mode....................................................................................................... 9

7.2 AES LOW Mode............................................................................................ 12

7.3 Auto IRIS Mode............................................................................................. 12

7.4 Auto IRIS+SHUTTER Mode ......................................................................... 13

7.5 ME (Manual Exposure) Mode....................................................................... 13

8. PICTURE – Picture performance setting .......................................................... 13

8.1 VIDEO setting ............................................................................................... 13

8.2 APERTURE setting........................................................................................ 14

8.3 GAMMA setting............................................................................................. 14

9. DISPLAY – Video display mode setting............................................................ 14

10. OPD WINDOW – Optical detection window adjustment .................................. 15

11. MISC – miscellaneous setting .......................................................................... 15

11.1 Synchronization ............................................................................................ 15

11.2 AUTO IRIS LENS........................................................................................... 15

11.3 IRIS WINDOW ............................................................................................... 15

12. Technical Specifications ................................................................................... 16

1. General

The MC-2620 series is a high resolution Super Nite-Vision OSD B/W CCD

Camera designed for professional video surveillance systems. It employs a

state-of-the-art 1/3” SONY Ex-view HAD CCD sensor with unprecedented,

high sensitivity on both infrared and visible lights. The advanced CCD sensor

and Digital Signal Processor (DSP) contribute an outstanding 600 TV lines

excellent monochrome picture. This camera also provides advanced On-

Screen Display (OSD) functions setup for various applications.

WARNING



To prevent electric shock, do not expose this device directly to rain, snow

or high moisture environment. For outdoor application, a weatherproof

housing should be applied.



Do not attempt to open the cover of camera as it may cause an electric

shock.



Reliable and safe operation of this camera is only guaranteed by correct

transportation, storage, installation and maintenance.

2. Descriptions

1/4"-20 UNC

MC-2620C/2620E

MC-2621C/2621E

MC-2622C/2622E

PL VIDEO OUTMONITOR

COM PORT

12V

PL VIDEO OUTMONITOR

COM PORT

~AC24

DC12

GND

PL VIDEO OUTMONITOR90~250VAC

COM PORT

A. C mount lens adapter

If a CS mount lens (not included) is applied, C mount adapter ring should

be removed.

B. Back focus locking screw

Loosen this screw to adjust the back focal length to fit with different type

of lens.

C. Mounting bracket screw hole (1/4” – 20 UNC)

D. Auto iris lens connector (Mini Jack)

E. Video/DC drive AI lens selector

F. DC level adjuster

Adjustment may be required if a DC drive auto iris lens is used.

G. Video output terminal (BNC)

H. On-Screen Display control buttons

I. Monitor output / VBS or VS Gen-lock sync. input

This terminal on model MC-2620 & MC-2622 is a parallel video output for

on-site monitor connection. For model MC-2621, this terminal is for

VBS/VS Gen-lock synchronization signal input.

J. RS-232 COM Port

This port is for connection with CP-01 or RS-232 remote control facility.

K. Power supply LED indicator

L. AC power cord (MC-2622)

Poor quality power supply may result in inferior picture.

M. 24 VAC/12 VDC power input terminal (MC-2621)

This terminal is non-polarity.

N. 12 VDC power input terminal (MC-2620)

DC VIDEO

~AC24V

DC 12V

12V

DC VIDEO

3. Lens connections

Lens for 1/3, 1/2, 2/3 or 1-inch CCD with a CS or C-mount can be used on

this camera. If the illumination remains stable(e.g. indoors), you can choose

a lens with manual iris adjustment. The camera should be set at AES mode,

so that the shutter speed will be automatically adapted depending on the

illumination. If the illumination changes rapidly, you should choose a lens

with automatic iris (AI) control to ensure optimum exposure of the picture.

Both Video and DC drive AI lens can be used on this camera.

3.1 Video drive auto iris lens (with EE amp)

If a video drive auto iris lens is applied, ensure to

set the lens selector to “VIDEO” position.

Cable leads connection

1. Red ------Power supply

2. NC -------Not used

3. White ----Video

4. Black ----Shielded (screen)

3.2 DC drive auto iris lens (without EE amp)

If a DC drive auto iris lens is applied, set the lens

selector to “DC” position.

Cable leads connection

1. Damping coil (-)

2. Damping coil (+)

3. Driving (+)

4. Driving (-)

 To ensure correct lead connection, refer to the instruction of CCTV lens.

Incorrect connection may result in damage to the lens and camera.

3.3 Manual or fixed iris lens

The exposure control of this camera (electronic shutter control) is fully

automatic. It can compensate a change in the lighting level by a factor of

2000. If this is sufficient for the system, a lens with manually adjustable

or fixed iris can be used. When using this type of lens, the light control of

this camera must be set at AES via OSD control.

4. OSD Setup

All features and functions of this camera can be set or changed via its OSD

control. The OSD setup can be done via control buttons on the rear panel of

the camera, CP-01 (optional) remote control keypad or RS-232 remote

control facility from computer.

4.1 OSD Control Buttons

1. UP button

Press this button to move the cursor upward.

Use this button to select item.

2. LEFT button

Press this button to move the cursor left.

Use this button to change or adjust the

parameter of the selected item.

3. RIGHT button

Press this button to move the cursor right. Use this button to change or

adjust the parameter of the selected item.

4. DOWN button

Press this button to move the cursor downward. Use this button to select

item.

5. ENTER button

Press this button to access into OSD setup menu. If the selected item

has sub-menu, press this button to enter.

4.2 CP-01 Remote Controller

Connect the CP-01 OSD Remote Controller to the COM PORT of the camera,

All functions of this camera can be set via this remote controller. The

operation of CP-01 is same as the key buttons of camera.

4.3 RS-232 Computer connection

All functions of this camera can be remotely controlled by PC via RS-232

under Window 95/98.

1. Insert the attached disk into floppy and run OSD_0.EXE to extract all files

into hard disk.

2. Execute OSD_00.EXE. A virtue keypad icon will display on monitor.

3. Use the mouse to point the icons as like pressing the buttons.

For details of RS-232 connections, please enter the SETUP key on the

monitor.

OSD CONTROL

LER

5. Setup Menu

5.1 Main menu

Once access into OSD setup mode, the

main setup menu will appear on the

monitor. This menu contains 7 options for

setting all functions of the camera.

 END - Exit from OSD setup mode.

Move the cursor to “END” at the

bottom line, then press “ENTER” button.

 INIT - Reset all parameters to factory default value.

Move the cursor to “INIT” and press “ENTER” button. This operation will

erase all previous settings and return to factory default setting.

This operation should not be executed unless it is absolutely necessary.

 DEMO – Demonstrate all functions of this camera.

Move the cursor to “DEMO” and press “ENTER” button to enter function

demo mode. Discontinue the power supply to stop the demo mode.

 - Adjust the position of menu on the screen.

Move the cursor to “” and press “ENTER”. Press “UP” or “DOWN”

button to move the menu up or down on the screen.

 UNLOCK – lock the setup menu.

Move the cursor to “UNLOCK” and press “ENTER”. Once the menu is

locked, the user must enter the following password to enter the menu.

UNLOCK PASSWORD : Press UP, DOWN, DOWN, RIGHT and then

ENTER buttons to unlock the menu.

Note: If no any button is pressed within 2 minutes under OSD setup mode, all

modified parameters will be stored automatically. The camera will return to

normal picture display mode.

SETUP MENU

CAMERA ID ON

LIGHT CNTL AES

WHITE BAL ATW

PICTURE VIDEO

DISPLAY MONOCH POS

OPD WINDOW

MISC

END INIT DEMO ↑UNLOCK

6. CAMERA ID – Camera title setting

This camera provides the capability of setting its own identification title. Move

the cursor to “CAMERA ID” and press “ENTER” button to enter ID setting

sub-menu shows as below

6.1 Selecting character

Move the blinking cursor to the character. Press “ENTER” and the

selected character will display at the editing area according to the

selecting sequence. Repeat the procedure until all characters are

selected.

6.2 Editing camera title

Move the cursor to “” to edit any specific character at the editing

area. To erase a character or input a space between two characters,

move the cursor to the BLANK (between “z” and “,”) and press “ENTER"

button.

6.3 Setting title position

Move the cursor to “POSI” and press “ENTER”

button, then the selected camera title will display

on the screen. You can move the title to the

desired position by pressing “UP”, “DOWN”,

“RIGHT” and “LEFT” buttons.

Press “ENTER” button to fix the title position and return to the main

menu.

6.4 Setting title display

The brightness and fringe of title can also be adjusted. Move the cursor

to “BRI” to adjust the brightness of title. Press “ENTER” button to

increase the brightness. 5-step adjustments can be made and recycled

by pressing the “ENTER” button.

Move the cursor to “BLK” and press “ENTER” button to adjust the black

level of character outline. 5-step adjustments can be made and recycled

by pressing the “ENTER” button.

Character Area

ＣＡＭＥＲＡＩＤ

０１２３４５６７８９：

ＡＢＣＤＥＦＧＨＩＪＫ

ＬＭＮＯＰＱＲＳＴＵＶ

ＷＸＹＺａｂｃｄｅｆｇ

ｈｉｊｋｌｍｎｏｐｑｒ

ｓｔｕｖｗｘｙｚ，．

□□□□□□□□□□□□□□□□□

ＲＥＴＰＯＳＩ ← → ＢＲＩＢＬＫ

Blinking

Editing Area

Command Area

↑

← CAM 001 →

↓

7. LIGHT CNTL – Exposure mode setting

This camera provides 6 different exposure modes for different environments

and applications. Move the cursor to “LIGHT CNTL”, then press “ENTER”

button to enter its sub-menu.

Press “RIGHT” or “LEFT” button to select the desired exposure mode, press

“ENTER” button to enter the sub-menu of the selected mode.

The exposure mode appears in the following sequence;

AES AES LOW FLICKERLESS AUTO IRIS AUTO IRIS+SHUTTER

ME AES

7.1 AES mode

Once enter into the AES sub-menu, the

screen will shows as right. This sub-menu

contains 6 setting options for selection.

7.1.1 BLC (Back Light Compensation) setting (for all AE modes)

This setting controls the operation of BLC. Press “LEFT” or “RIGHT”

button to switch the BLC ON or OFF respectively. The back light

compensation of this camera is a combination of Histogram and

Central window weighted. Both of these two types of BLC are

adjustable via the sub-menu of BLC. To enter BLC sub-menu, move

the cursor at BLC and press “ENTER” button. BLC setup menu will

show on the screen for setting.

SETUP MENU

CAMERA ID ON

LIGHT CNTL AES

WHITE BAL ATW

PICTURE VIDEO

DISPLAY B/W POS

OPD WINDOW

EXT SYNC INT

END INIT DEMO ↑UNLOCK

AES MENU

BLC ON

Av:Pk 8:4

AGCMAX 36 dB

RESPONSE 03

AGCMIN 01 dB

SHUTLIM 1/100000

RETURN

Press

ENTER to

sub menu

UTO EXPOSURE MODE:

ES mode: 1/50(1/60) to 1/100,000 sec. AGC 0-36 dB.

ES LOW mode: 1/120(1/100) to 100,000 sec. AGC 0-36dB.

FLICKERLESS mode: 1/120 sec. (CCIR); 1/100 sec.(EIA), AGC 0-36dB.

UTO IRIS mode: 1/50 sec. (CCIR), 1/60 sec. (EIA) AGC 0-36dB.

UTO IRIS+SHUTTER mode: 1/50(1/60) to 1/10,000 sec. AGC 0-36 dB.

AES MENU

BLC ON

Av:Pk 8:4

AGCMAX 36 dB

RESPONSE 03

AGCMIN 01 dB

SHUTLIM 1/100000

RETURN

 HIST BLC – ON/OFF

The HIST (Histogram) BLC is ideal for

the subject that is slightly less

illuminated and moves around within

the screen. This intelligent BLC

categorize the scene into three different

parts (high-medium-low) according to the luminous intensity and

calculate the histogram of each part. The built-in microcomputer will

detect the contrast of whole scene and turn the BLC on or off

automatically.

Press the “LEFT” or “RIGHT” button to switch the HIST BLC on or off.

 BLC LEVEL (for Histogram BLC)

The compensation level of histogram BLC can be adjusted from 0 to

255. Default value is 13. Increasing the value will enhance the

compensation level.

 WINDOWS BLC – ON/OFF

The WINDOW BLC is ideal for the scene that main object always

stays at the center of the screen. With this BLC mode, compensation

level of the central window is weighted more than the corners of the

scene. This type of BLC helps camera to provide better picture of the

subject with strong back light.

WNDW 0

WNDW 2

CENTRAL

WNDW WNDW 3

WNDW 1

Size and location of the center window can be adjusted within the

225 grids of screen. (Refer OPD setting for more details)

BLC SETUP MENU

HIST BLC ON

BLC LEVEL 13

WINDOWS BLC OFF

WNDW 0 WEIGHT 01

WNDW 1 WEIGHT 01

WNDW 2 WEIGHT 03

WNDW 3 WEIGHT 03

RETURN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Videoline Caméra de sécurité

Videoline

Videoline MC-600C Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur