Videofied XT GPRS Manuel utilisateur

Monitored GPRS Cellular alarm system

Made by RSI VIDEO TECHNOLOGIES

Installation

Manual

Security System Videofied®- Model XT GPRS

XT GPRS -

XT600i GPRS for USA/Canada,

XT700i GPRS for Australia/New Zealand

200 i GPRS for Europe and rest of the world.

Video Alarm Technologies HELPLINE: 1300 46 44 55

[email protected]

Australasian Hotline +61 (0) 7 5

Video Alarm Technologies

SETUP MANUAL

FOR

XT710 GPRS PANEL

*THIS SYSTEM REQUIRES A CMA01 FOR PROGRAMMING*

1. XT Installation

Open the Control Panel

Unscrew the 2 screws holding

the panel together

infor

[email protected]

www.videofied.com.au

2009/06/15 Ed1.0 User manual for XT710GPRS

2 | Page

*The SIM card must not be inserted or removed while the panel is powered*

Install the SIM card

Put the SIM card on the plastic

(Take care to respect the right direction)

Slide it into the connector.

*How to Mount the Control Panel

Fix the back casing on the wall

with 3 screws (n top).

*Mounting does not have to be performed

in-order to program the panel.

Power the XT panel

Option 1: Option 2:

4 x LSH20 Lithium D-Cell

Used for Standalone or Xtender mode without

Programmable Inputs. (inputs may be used if N/O)

4 x E95 Alkaline D-Cell + 12DC power supply

Used for Standalone or Xtender mode where

Programmable Inputs/Mapping will be used

2009/06/15 Ed1.0 User manual for XT710GPRS

3 | Page

2. XT Programming

CMA Programming Device/Keypad

Reset the XT Panel :

Press and hold programming button (n) for 10sec until the

Indicator LED blinks twice

Press and instantly release the programming button (n).

The indicator LED will blink once. The panel is now in ‘Learn

Mode’ for the CMA701 keypad.

CLR & ESC/NO

≤======XX======>

Insert all three batteries into the CMA701 and press on both

the ESC/NO and CLR keys at the same time and release.

The indicator LED on the keypad will blink rapidly.

©YES

KEYPAD 1

RECORDED

www.RsiAlarm.com

<- LANGUAGE : ->

ENGLISH

Õor Öfor language selection

©YES to apply

Other languages are available by scrolling with arrows.

ITALIANO, NEDERLANDS, DEUTSCH, CASTELLANO,

SVENSKA, PORTUGUES, FRANCAIS

Press YES for the selected one.

2009/06/15 Ed1.0 User manual for XT710GPRS

4 | Page

ENTER THE

INSTALLER CODE

4 TO 6 DIGITS

THEN YES

INSTALLER CODE:

xxxx

©YES

CONFIRM CODE

RE-ENTER CODE

CONFIRM CODE

xxxx

CODE NAME :

ACCESS 1

ENTRY COMPLETE

RADIO RANGE

TEST ?

RF TEST

x/9

©YES

ESC/NO

ADJUSTING

TIME AND DATE

DATE (Year) :

09/ /

DATE (Year) :

10/ /

DATE (Month) :

10/01/

The Radio Range test must be run during the learn in

process in order to ensure proper pairing with the control

panel. This test is the strength of communication between

the device and the control panel. The keypad will display a

real time range out of 9 for the device that the test is

running for. To receive the most accurate results you must

run the radio range test for at least 30 seconds.

The RF level test must be 8/9 or better for reliable

transmission.

©YES

RADIO RANGE

TEST ?

©YES

Wait while the screen changes

Use the Õor Öto set the Year

You may name the installer code using the Alphanumeric

Keypad. If you leave the name blank it will default to

‘ACCESS 1’

Use the Alphaumeric Keypad to enter the Installer Code

*This code is important to keep track of. There is no back

door to the system

Wait while the screen changes

2009/06/15 Ed1.0 User manual for XT710GPRS

5 | Page

DATE (Minutes) :

10:00

DATE (Minutes) :

10:53

03/06/09 10:53

ENTRY COMPLETE

CONNECTED TO

MONITOR.STATION?

ACCOUNT NUMBER?

ACCOUNT NUMBER:

99865123

PERIODIC TEST:

24 HOURS

Other periods are available:

48 hours, 24 hours, 12 hours,1 hour, No Test

Use arrows for the selection and press ©YES to confirm.

*We suggest at least a 24 hour test

Õor Öfor period selection

and ©YES to apply

DATE (Month) :

10/11/

DATE (Day) :

09/06/01

DATE (Day) :

09/06/03

©YES

Using the arrow keys + ©YES to choose the Hour and

Minute the periodic test will happen.

TEST MINUTE:

00:00

TEST HOUR:

00:00

Use the Alphanumeric Keypad to enter in a 4-8 digit account

number provided by the Central Station

Use the Õor Öto set the Hour

Use the Õor Öto set the Minutes

©YES

TIME (HOUR) :

00:00

YOU MUST ALWAY CHOOSE ‘YES’

©YES

TIME (HOUR) :

10:00

Use the Õor Öto set the Day

Use the Õor Öto set the Month

2009/06/15 Ed1.0 User manual for XT710GPRS

6 | Page

CODE/STATE

MODIFICATION ?

ENTER YOUR

I.D.

NAME OR ADDRESS

AREAS

CONFIGURATION

AREA NAME 1:

Other values are available:

2 min, 1 min, 45 sec

Use the arrows for the selection and ©YES to confirm.

Other values are available:

2 min, 1 min, 45 sec, 30 sec, 15 sec

Use the arrows for the selection and ©YES to confirm.

Use the Alphanumeric Keypad to name the area and press

©YES. Repeat for all areas. If you want to keep the default

area names press the ESC/NO key.

CODE/STATE modification

These are the default transmitted events:

Intrusions

Panic

Periodic Test

Tamper

Supervision Fault

Device Battery Low

Panel Battery Low

If you would like any other events to be transmitted

press ©YES and use the Õor Öto toggle

between events

If you would like the default press ESC/NO

You may name the Site

Wait

TRANS. STATE

MODIFICATION

List of all

events

©YES

ESC/NO

©YES

EXIT DELAY:

45 Sec

ENTRY DELAY:

15 Sec

ARMING OPTION:

From the host ARMING OPTION:

Standalone

ARMING OPTION: You will choose between configurations

depending on how you will be arming the system.

From the host: Will make the XT a piggyback/xtender

system that arms and disarms off the latching of 9-12v on

the arming inputs.

Standalone: Will make the XT a solo system controlled by

arming and disarming using Videofied peripheral devices.

Go to Page 7 if you will

be choosing this option

Go to Page 8 to continue with

standalone programming

2009/06/15 Ed1.0 User manual for XT710GPRS

7 | Page

©YES

ARMING OPTION :

From The Host

MODE:

Slow

MODE:

Fast

Mode Slow : Used for following the arming and disarming of

the host system. This will arm each device one at a time

conserving battery life.

Mode Fast : Used to instant arm all devices while sacrificing

battery life.

ENTRY DELAY

There is no Videofied Exit Delay with the ‘From the Host’

option. Videofied will only control the Entry Delay.

Enter the value for your Entry Delay up to 255 seconds and

press ©YES.

VALUE:(0-255)

(000):

TRANSMISSION

DELAY

Value: (0-600)

(000):

ARMING

CONFIRMATION

©YES

Value: (0-5)

(0-5):

©YES

By entering a value using the keypad, up to 600 seconds,

the transmission of any event will be delayed that many

seconds.

Enter the value you would like for the Transmission Delay

and press ©YES

Arming Confirmation is the number of seconds of latched

voltage (where voltage must stayed latched after) the panel

will require before arming.

Enter the value you would like for the Arming Confirmation

and press ©YES

©YES

Using the control panel as a Xtender system will only be able to arm and disarm by latching 9-12vDC to

one of the two inputs.

Arming input 1 will control the arming and disarming of devices in areas 1 and 2. Where devices in

area 1 are subject to the Entry Delay.

Arming input 2 will control the arming and disarming of devices in areas 3 and 4. Where devices in

area 3 are subject to the Entry Delay.

2009/06/15 Ed1.0 User manual for XT710GPRS

8 | Page

©YES

GPRS

PARAMETERS ?

APN CODE

APN CODE:

xxxxx.xxxxxx.xxx

Your APN code (Access Point Name) is given to you by your

SIM card Provider. Press ©YES to enter into the parameter

and use the Keypad to complete the code. Press ©YES to

confirm your entry and the Öarrow to move to the next

parameter.

USERNAME

PASSWORD

Your USERNAME is given to you by your SIM card Provider.

Press ©YES to enter into the parameter and use the

Keypad to complete the name. Press ©YES to confirm

your entry and the Öarrow to move to the next parameter.

PASSWORD:

xxxxxxxxxxxx

USERNAME:

xxxxxxxxxxx

©YES

IP1 ADDRESS

IP1 ADDRESS:

xxx.xxx.xxx.xxx

DOMAIN NAME 1

©YES

DOMAIN NAME 1:

xxxxx.xxx.xxx

PORT 1

PORT 1:

xxx

©YES

Your PASSWORD is given to you by your SIM card Provider.

Press ©YES to enter into the parameter and use the

Keypad to complete the name. Press ©YES to confirm

your entry and the Öarrow to move to the next parameter.

Your IP1 address is given to you by your Monitoring Station.

Press ©YES to enter into the parameter and use the

Keypad to complete the address. Press ©YES to confirm

your entry and the Öarrow to move to the next parameter.

*You will use either a IP address or a Domain Name but not

both

Your Domain Name is given to you by your Monitoring Station.

Press ©YES to enter into the parameter and use the

Keypad to complete the name. Press ©YES to confirm

your entry and the Öarrow to move to the next parameter.

*You will use either a IP address or a Domain Name but not

both leave it blank if an IP has already been entered.

The Port is given to you by your Monitoring Station. By default

the panel will use 888. If you need to modify the port press

the ©YES key to enter into the parameter and the keypad

to complete the port. Press ©YES to confirm and the

Öarrow to move to the next parameter.

GPRS PARAMETERS?

The Port is given to you by your Monitoring Station. By default

the panel will use 888. If you need to modify the port press

the ©YES key to enter into the parameter and the keypad

to complete the port. Press ©YES to confirm and the

Öarrow to move to the next parameter. Continue through

IP2 and TMT IP.

Once you have entered all valid parameters press ESC/NO

to return to the main menu then ESC/NO again to move to

the next parameter.

ESC/NO

2009/06/15 Ed1.0 User manual for XT710GPRS

9 | Page

3. Other XTi setup with CMA701 keypad (Standalone ONLY)

Other setup (badges/codes, arming profiles, etc…) must be set with the CMA keypad

4. GPRS error codes

GPRS LEVEL?

TEST IN PROGRESS

YES = END

GPRS LEVEL

x/5

Videofied will require a 3/5 or better for reliable transmission

of Video alarms

During the GPRS Level test the Modem will boot and

attempt to gain access to the internet to post a Level out of

5 or an error Code that will help troubleshoot why it cannot

connect. To keep the keypad awake use any keys on the

keypad except the YES, ESC/NO, and CLR keys. This test

can take up to 5 minutes. Once the level or error has

posted press YES to continue in programming.

*For explanation of GPRS errors see page 9

RECORDING

DEVICES

Each device has a unique programming button. Please

reference the Installation Sheet for the device you would like

to program.

PRESS PROGRAM

BUTTON OF DEVICE

ENTERING A NEW

DEVICE?

END OF

CONFIGURATION

CLOSE THE PANEL

©YES or ESC/NO

©YES

OPERATION

Before completing programming make sure that all tampers

are depressed by verifying that each devices indicator LED is

off

Table des matières

Autres manuels Videofied Système de sécurité

Videofied

Videofied ICT702 Instructions de montage

Videofied

Videofied XT Instructions d'installation et d'utilisation

Videofied

Videofied XL GPRS Manuel utilisateur

Videofied

Videofied VISIO Manuel utilisateur

Videofied

Videofied XL 3.1 Manuel du propriétaire

Videofied

Videofied SE651 Manuel utilisateur

Videofied

Videofied CT211 Manuel utilisateur

Videofied

Videofied OSMVC 200 Manuel utilisateur

Videofied

Videofied XT series Manuel utilisateur

Videofied

Videofied VIA-Pro Manuel utilisateur

Videofied

Videofied xl series Manuel utilisateur

Videofied

Videofied CT 600 Manuel utilisateur

Videofied

Videofied XTO Series Manuel utilisateur

Videofied

Videofied SE550 Manuel utilisateur

Videofied

Videofied SE601 Manuel utilisateur

Videofied

Videofied XV Manuel utilisateur

Videofied

Videofied OMV601 Manuel utilisateur

Videofied

Videofied ISMV 200 Manuel utilisateur

Videofied

Videofied IDC Series Manuel utilisateur

Videofied

Videofied W730 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur